Ultrathin CNTs Film Based on Marangoni Effect for Strain Sensing Application
Open Access
Abstract
The Marangoni effect has been applied in the preparation of large-area ultrathin films. However, defects occur frequently during the transfer progress of ultrathin films to substrates, which limits its application in scalable and massive fabrication. Carbon nanotubes (CNTs), as typical one-dimensional carbon materials, are widely used in wearable and flexible sensors due to their outstanding electrical and mechanical properties. In this paper, Marangoni-driven self-assembled CNTs film was obtained by injecting 0.5 mL 1 mg·mL−1 CNTs/ethanol dispersion on 100 cm2 water dropwise; the thickness, sheet resistance, and optical transmittance (at 550 nm) of the as-prepared ultrathin film were 38 nm, 7.3 kΩ/□, and 66.9%, respectively. The CNTs film was transferred onto polydimethylsiloxane (PDMS) to prepare a conductive composite of CNTs/PDMS film and the sheet resistance of the composite film reached 21.0 kΩ/□. Furthermore, the packaged PDMS/CNTs/PDMS (PCP) strain sensors with a sandwich-like structure exhibited satisfactory sensitivity with a gauge factor of 3.4 at 50% strain, a large working range (89%), and excellent stability (>8000 cycles). The easy-making and low-cost sensors show great potential in wearable electronics, real-time motion detection, and electronic skin.Keywords
Funding Information
- National Natural Science Foundation of China (31971250, 52075371)
This publication has 51 references indexed in Scilit:
- Flexible electrically resistive-type strain sensors based on reduced graphene oxide-decorated electrospun polymer fibrous mats for human motion monitoringCarbon, 2018
- Flexible and Transparent Strain Sensors with Embedded Multiwalled Carbon Nanotubes MeshesACS Applied Materials & Interfaces, 2017
- Towards wearable pressure sensors using multiwall carbon nanotube/polydimethylsiloxane nanocomposite foamsMaterials & Design, 2017
- A Superhydrophobic Smart Coating for Flexible and Wearable Sensing ElectronicsAdvanced Materials, 2017
- Transparent, Flexible Strain Sensor Based on a Solution-Processed Carbon Nanotube NetworkACS Applied Materials & Interfaces, 2017
- Flexible Piezoelectric-Induced Pressure Sensors for Static Measurements Based on Nanowires/Graphene HeterostructuresACS Nano, 2017
- High-Performance Strain Sensors with Fish-Scale-Like Graphene-Sensing Layers for Full-Range Detection of Human MotionsACS Nano, 2016
- Stretchable, Skin‐Mountable, and Wearable Strain Sensors and Their Potential Applications: A ReviewAdvanced Functional Materials, 2016
- Large‐Area Ultrathin Graphene Films by Single‐Step Marangoni Self‐Assembly for Highly Sensitive Strain Sensing ApplicationAdvanced Functional Materials, 2016
- Two-Minute Assembly of Pristine Large-Area Graphene Based FilmsNano Letters, 2014