Xiang Ge
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Xiang Ge has a total of 93 co-authors. Here are the top co-authors by number of shared publications:
- Caideng Yuan
School of Chemical Engineering and Technology, Tianjin University, Tianjin 300350, China
8 shared publications - Kefeng Wang
National Engineering Research Center for Biomaterials, Sichuan University, Chengdu 610064, China
7 shared publications - Zhaoyang Li
Tianjin University
7 shared publications - Fuzeng Ren
Department of Materials Science and Engineering Southern University of Science and Technology Shenzhen Guangdong China
6 shared publications - Xiong Lu
Institute of Biomedical Engineering, College of Medicine, Southwest Jiaotong University, Chengdu, China
5 shared publications - Hanpeng Liu
Tianjin Key Laboratory of Composite and Functional Materials, School of Materials Science and Engineering, Tianjin University, Tianjin 300072, China
4 shared publications
Latest Publications
- Open Access
- 11 August 2026
- Published by MDPI AG in Biomimetics
- Vol. 11 (8) , 572
Advances in Smart Responsive Nanofibers for Wound Healing
Wound healing, particularly chronic wound healing, is a complex and dynamically regulated process that is commonly challenged by wound infection caused by the invasion of various bacteria. The emergence of nanofibers has overcome the limitations of traditional wound dressings in clinical applications, and has further evolved into smart responsive wound dressings with specific capability to perceive both endogenous and exogenous stimuli and produce dynamic responses. Accordingly, this article reviews the latest research advances in smart responsive nanofibers as wound dressings, and systematically elaborates the types of substrate materials and various preparation methods for nanofibers. In particular, the nanofibers prepared by electrospinning (such as ultrasound (US) responsive nanofiber dressing) have demonstrated unique potential in the construction of smart responsive wound dressings due to their high specific surface area and porosity characteristics. Most importantly, the incorporation of different types of stimuli constructs smart responsive nanofiber dressings, which not only provides a novel therapeutic strategy for wound healing, but also outlines future research directions for the development of smart responsive nanofibers.
- 11 August 2026
- Published by MDPI AG in Biomimetics
- Vol. 11 (8) , 572
Open AccessAdvances in Smart Responsive Nanofibers for Wound Healing
Wound healing, particularly chronic wound healing, is a complex and dynamically regulated process that is commonly challenged by wound infection caused by the invasion of various bacteria. The emergence of nanofibers has overcome the limitations of traditional wound dressings in clinical applications, and has further evolved into smart responsive wound dressings with specific capability to perceive both endogenous and exogenous stimuli and produce dynamic responses. Accordingly, this article reviews the latest research advances in smart responsive nanofibers as wound dressings, and systematically elaborates the types of substrate materials and various preparation methods for nanofibers. In particular, the nanofibers prepared by electrospinning (such as ultrasound (US) responsive nanofiber dressing) have demonstrated unique potential in the construction of smart responsive wound dressings due to their high specific surface area and porosity characteristics. Most importantly, the incorporation of different types of stimuli constructs smart responsive nanofiber dressings, which not only provides a novel therapeutic strategy for wound healing, but also outlines future research directions for the development of smart responsive nanofibers.
- Open Access
- 14 July 2026
- Published by MDPI AG in Biomimetics
- Vol. 11 (7) , 493
Advances in 3D Printed Bone Implants: Smart Responsive Antibacterial Strategies and AI-Driven Design
For critical-sized bone defects, bioactive implants are indispensable. Although advanced three-dimensional (3D) printing technology enables the precise manufacturing of customized bone scaffolds, implant-associated infections (IAIs) remain a significant clinical challenge. Moreover, traditional passive antibacterial coatings often face problems such as uncontrolled release of antibacterial agents and insufficient long-term antibacterial efficacy. This review elaborates on the transformation of antibacterial strategies in the field of bone tissue engineering (BTE) from “passive” to “smart responsive” modes. We summarize the endogenous (such as pH, temperature, reactive oxygen species (ROS), and enzyme) and exogenous (such as light, microwave, and ultrasound) response systems. Notably, the ultrasound-driven strategy is highly emphasized due to its outstanding deep tissue penetrability and dual functional characteristics: it can not only eliminate stubborn biofilms through the sonodynamic effect by generating ROS, but also promote osteogenesis through the piezoelectric effect. Additionally, we also discuss the recent progress of artificial intelligence (AI) in the field of bone scaffold manufacturing. AI-driven algorithms help to rapidly optimize complex scaffold structures and accurately predict their mechanical properties, thereby effectively avoiding the inefficiencies brought about by the traditional “trial and error” method. In conclusion, combining AI-assisted manufacturing technology with smart responsive antibacterial strategies opens up a highly promising frontier field for the development of personalized and infection-free bone implants.
- 14 July 2026
- Published by MDPI AG in Biomimetics
- Vol. 11 (7) , 493
Open AccessAdvances in 3D Printed Bone Implants: Smart Responsive Antibacterial Strategies and AI-Driven Design
For critical-sized bone defects, bioactive implants are indispensable. Although advanced three-dimensional (3D) printing technology enables the precise manufacturing of customized bone scaffolds, implant-associated infections (IAIs) remain a significant clinical challenge. Moreover, traditional passive antibacterial coatings often face problems such as uncontrolled release of antibacterial agents and insufficient long-term antibacterial efficacy. This review elaborates on the transformation of antibacterial strategies in the field of bone tissue engineering (BTE) from “passive” to “smart responsive” modes. We summarize the endogenous (such as pH, temperature, reactive oxygen species (ROS), and enzyme) and exogenous (such as light, microwave, and ultrasound) response systems. Notably, the ultrasound-driven strategy is highly emphasized due to its outstanding deep tissue penetrability and dual functional characteristics: it can not only eliminate stubborn biofilms through the sonodynamic effect by generating ROS, but also promote osteogenesis through the piezoelectric effect. Additionally, we also discuss the recent progress of artificial intelligence (AI) in the field of bone scaffold manufacturing. AI-driven algorithms help to rapidly optimize complex scaffold structures and accurately predict their mechanical properties, thereby effectively avoiding the inefficiencies brought about by the traditional “trial and error” method. In conclusion, combining AI-assisted manufacturing technology with smart responsive antibacterial strategies opens up a highly promising frontier field for the development of personalized and infection-free bone implants.
- Open Access
- 11 March 2026
- Published by Royal Society of Chemistry (RSC) in Lab on a Chip
- Vol. 26 (7) , 2201-2217
TopoChip-based high-throughput screening of micropatterned hydroxyapatite to guide stem cell behavior and accelerate bone regeneration
A hydroxyapatite-coated TopoChip with 127 micropatterns enables high-throughput screening of osteoinductive topographies. Narrow grooves and closely spaced pillars enhance contact guidance, promoting osteogenesis and accelerating bone regeneration.
- 11 March 2026
- Published by Royal Society of Chemistry (RSC) in Lab on a Chip
- Vol. 26 (7) , 2201-2217
Open AccessTopoChip-based high-throughput screening of micropatterned hydroxyapatite to guide stem cell behavior and accelerate bone regeneration
A hydroxyapatite-coated TopoChip with 127 micropatterns enables high-throughput screening of osteoinductive topographies. Narrow grooves and closely spaced pillars enhance contact guidance, promoting osteogenesis and accelerating bone regeneration.
- Open Access
- 26 October 2024
- Published by MDPI AG in Biomimetics
- Vol. 9 (11) , 656
Recent Advances in Antibacterial Strategies Based on TiO2 Biomimetic Micro/Nano-Structured Surfaces Fabricated Using the Hydrothermal Method
Ti and its alloys, widely utilized in orthopedic and dental implants, inherently lack antibacterial properties, posing significant infection risks, especially in the context of growing antibiotic resistance. This review critically evaluates non-antibiotic antibacterial strategies, with a particular focus on surface modifications and micro/nano-structured surfaces. Micro/nano-structured surfaces, inspired by natural topographies, utilize physical mechanisms to eradicate bacteria. Despite their potential, the antibacterial efficacy of these surfaces remains insufficient for clinical application. Titanium dioxide (TiO2), known for its excellent photocatalytic antibacterial activity and biocompatibility, is emerging as an ideal candidate for enhancing micro/nano-structured surfaces. By combining the photocatalytic antibacterial effects of TiO2 with the mechanical bactericidal properties of micro/nano-structured surfaces, superior antibacterial performance can be achieved. The hydrothermal method is frequently employed to fabricate TiO2 micro/nano-structured surfaces, and this area of research continues to thrive, particularly in the development of antibacterial strategies. With demonstrated efficacy, combined antibacterial strategies based on TiO2 micro/nano-structured surfaces have become a prominent focus in current research. Consequently, the integration of physical stimulation and chemical release mechanisms may represent the future direction for TiO2 micro/nano-structured surfaces. This review aims to advance the study of TiO2 micro/nano-structured surfaces in antibacterial applications and to inspire more effective non-antibiotic antibacterial solutions.
- 26 October 2024
- Published by MDPI AG in Biomimetics
- Vol. 9 (11) , 656
Open AccessRecent Advances in Antibacterial Strategies Based on TiO2 Biomimetic Micro/Nano-Structured Surfaces Fabricated Using the Hydrothermal Method
Ti and its alloys, widely utilized in orthopedic and dental implants, inherently lack antibacterial properties, posing significant infection risks, especially in the context of growing antibiotic resistance. This review critically evaluates non-antibiotic antibacterial strategies, with a particular focus on surface modifications and micro/nano-structured surfaces. Micro/nano-structured surfaces, inspired by natural topographies, utilize physical mechanisms to eradicate bacteria. Despite their potential, the antibacterial efficacy of these surfaces remains insufficient for clinical application. Titanium dioxide (TiO2), known for its excellent photocatalytic antibacterial activity and biocompatibility, is emerging as an ideal candidate for enhancing micro/nano-structured surfaces. By combining the photocatalytic antibacterial effects of TiO2 with the mechanical bactericidal properties of micro/nano-structured surfaces, superior antibacterial performance can be achieved. The hydrothermal method is frequently employed to fabricate TiO2 micro/nano-structured surfaces, and this area of research continues to thrive, particularly in the development of antibacterial strategies. With demonstrated efficacy, combined antibacterial strategies based on TiO2 micro/nano-structured surfaces have become a prominent focus in current research. Consequently, the integration of physical stimulation and chemical release mechanisms may represent the future direction for TiO2 micro/nano-structured surfaces. This review aims to advance the study of TiO2 micro/nano-structured surfaces in antibacterial applications and to inspire more effective non-antibiotic antibacterial solutions.
- Open Access
- 5 July 2024
- Published by MDPI AG in Biomimetics
- Vol. 9 (7) , 408
Various Antibacterial Strategies Utilizing Titanium Dioxide Nanotubes Prepared via Electrochemical Anodization Biofabrication Method
Currently, titanium and its alloys have emerged as the predominant metallic biomaterials for orthopedic implants. Nonetheless, the relatively high post-operative infection rate (2–5%) exacerbates patient discomfort and imposes significant economic costs on society. Hence, urgent measures are needed to enhance the antibacterial properties of titanium and titanium alloy implants. The titanium dioxide nanotube array (TNTA) is gaining increasing attention due to its topographical and photocatalytic antibacterial properties. Moreover, the pores within TNTA serve as excellent carriers for chemical ion doping and drug loading. The fabrication of TNTA on the surface of titanium and its alloys can be achieved through various methods. Studies have demonstrated that the electrochemical anodization method offers numerous significant advantages, such as simplicity, cost-effectiveness, and controllability. This review presents the development process of the electrochemical anodization method and its applications in synthesizing TNTA. Additionally, this article systematically discusses topographical, chemical, drug delivery, and combined antibacterial strategies. It is widely acknowledged that implants should possess a range of favorable biological characteristics. Clearly, addressing multiple needs with a single antibacterial strategy is challenging. Hence, this review proposes systematic research into combined antibacterial strategies to further mitigate post-operative infection risks and enhance implant success rates in the future.
- 5 July 2024
- Published by MDPI AG in Biomimetics
- Vol. 9 (7) , 408
Open AccessVarious Antibacterial Strategies Utilizing Titanium Dioxide Nanotubes Prepared via Electrochemical Anodization Biofabrication Method
Currently, titanium and its alloys have emerged as the predominant metallic biomaterials for orthopedic implants. Nonetheless, the relatively high post-operative infection rate (2–5%) exacerbates patient discomfort and imposes significant economic costs on society. Hence, urgent measures are needed to enhance the antibacterial properties of titanium and titanium alloy implants. The titanium dioxide nanotube array (TNTA) is gaining increasing attention due to its topographical and photocatalytic antibacterial properties. Moreover, the pores within TNTA serve as excellent carriers for chemical ion doping and drug loading. The fabrication of TNTA on the surface of titanium and its alloys can be achieved through various methods. Studies have demonstrated that the electrochemical anodization method offers numerous significant advantages, such as simplicity, cost-effectiveness, and controllability. This review presents the development process of the electrochemical anodization method and its applications in synthesizing TNTA. Additionally, this article systematically discusses topographical, chemical, drug delivery, and combined antibacterial strategies. It is widely acknowledged that implants should possess a range of favorable biological characteristics. Clearly, addressing multiple needs with a single antibacterial strategy is challenging. Hence, this review proposes systematic research into combined antibacterial strategies to further mitigate post-operative infection risks and enhance implant success rates in the future.
- Open Access
- 15 June 2023
- Published by MDPI AG in Biomimetics
- Vol. 8 (2) , 262
Effect of Platelet-Rich Plasma Addition on the Chemical Properties and Biological Activity of Calcium Sulfate Hemihydrate Bone Cement
Currently, platelet-rich plasma (PRP) is an attractive additive for bone repair materials. PRP could enhance the osteoconductive and osteoinductive of bone cement, as well as modulate the degradation rate of calcium sulfate hemihydrate (CSH). The focus of this study was to investigate the effect of different PRP ratios (P1: 20 vol%, P2: 40 vol%, and P3: 60 vol%) on the chemical properties and biological activity of bone cement. The injectability and compressive strength of the experimental group were significantly higher than those of the control. On the other hand, the addition of PRP decreased the crystal size of CSH and prolonged the degradation time. More importantly, the cell proliferation of L929 and MC3T3-E1 cells was promoted. Furthermore, qRT-PCR, alizarin red staining, and western blot analyses showed that the expressions of osteocalcin (OCN) and Runt-related transcription factor 2 (Runx2) genes and β-catenin protein were up-regulated, and mineralization of extracellular matrix was enhanced. Overall, this study provided insight into how to improve the biological activity of bone cement through PRP incorporation.
- 15 June 2023
- Published by MDPI AG in Biomimetics
- Vol. 8 (2) , 262
Open AccessEffect of Platelet-Rich Plasma Addition on the Chemical Properties and Biological Activity of Calcium Sulfate Hemihydrate Bone Cement
Currently, platelet-rich plasma (PRP) is an attractive additive for bone repair materials. PRP could enhance the osteoconductive and osteoinductive of bone cement, as well as modulate the degradation rate of calcium sulfate hemihydrate (CSH). The focus of this study was to investigate the effect of different PRP ratios (P1: 20 vol%, P2: 40 vol%, and P3: 60 vol%) on the chemical properties and biological activity of bone cement. The injectability and compressive strength of the experimental group were significantly higher than those of the control. On the other hand, the addition of PRP decreased the crystal size of CSH and prolonged the degradation time. More importantly, the cell proliferation of L929 and MC3T3-E1 cells was promoted. Furthermore, qRT-PCR, alizarin red staining, and western blot analyses showed that the expressions of osteocalcin (OCN) and Runt-related transcription factor 2 (Runx2) genes and β-catenin protein were up-regulated, and mineralization of extracellular matrix was enhanced. Overall, this study provided insight into how to improve the biological activity of bone cement through PRP incorporation.
- Open Access
A Simple and Efficient Strategy for Preparation of Flexible Strain Sensors Based on Marangoni Effect
The Marangoni effect is a phenomenon of mass transfer between two fluids with different surface tensions, which has been used in many fields. In this paper, we prepared ultrathin conductive films with graphene (GN) and carbon nanotubes (CNTs) based on the Marangoni effect. The Marangoni self-assembled film exhibited excellent properties, showing a conductivity of 8.3 kΩ·sq−1, a transparency of 74% at 550 nm and a thickness of 28 nm when the mass ratio of CNTs and GN was 1:1. The conductive films were transferred to flexible substrates twice and fabricated face to face as strain sensors. The 3M4910-based strain sensors, which were prepared with a simple process and high material utilization rate, exhibited good sensitivity (GF = 5.7), a wide working range (193%) and satisfactory cyclic stability. The PDMS-based GN sensor showed high sensitivity (GF = 34), a wide working range (78%) and excellent stability (ε = 10%, > 8000 cycles). It has been proved that the sensors can be used to detect different joint movements of the human body and subtle movements, showing good application prospects in physiological signal detection.
Open AccessA Simple and Efficient Strategy for Preparation of Flexible Strain Sensors Based on Marangoni Effect
The Marangoni effect is a phenomenon of mass transfer between two fluids with different surface tensions, which has been used in many fields. In this paper, we prepared ultrathin conductive films with graphene (GN) and carbon nanotubes (CNTs) based on the Marangoni effect. The Marangoni self-assembled film exhibited excellent properties, showing a conductivity of 8.3 kΩ·sq−1, a transparency of 74% at 550 nm and a thickness of 28 nm when the mass ratio of CNTs and GN was 1:1. The conductive films were transferred to flexible substrates twice and fabricated face to face as strain sensors. The 3M4910-based strain sensors, which were prepared with a simple process and high material utilization rate, exhibited good sensitivity (GF = 5.7), a wide working range (193%) and satisfactory cyclic stability. The PDMS-based GN sensor showed high sensitivity (GF = 34), a wide working range (78%) and excellent stability (ε = 10%, > 8000 cycles). It has been proved that the sensors can be used to detect different joint movements of the human body and subtle movements, showing good application prospects in physiological signal detection.
- Open Access
Ultrathin CNTs Film Based on Marangoni Effect for Strain Sensing Application
The Marangoni effect has been applied in the preparation of large-area ultrathin films. However, defects occur frequently during the transfer progress of ultrathin films to substrates, which limits its application in scalable and massive fabrication. Carbon nanotubes (CNTs), as typical one-dimensional carbon materials, are widely used in wearable and flexible sensors due to their outstanding electrical and mechanical properties. In this paper, Marangoni-driven self-assembled CNTs film was obtained by injecting 0.5 mL 1 mg·mL−1 CNTs/ethanol dispersion on 100 cm2 water dropwise; the thickness, sheet resistance, and optical transmittance (at 550 nm) of the as-prepared ultrathin film were 38 nm, 7.3 kΩ/□, and 66.9%, respectively. The CNTs film was transferred onto polydimethylsiloxane (PDMS) to prepare a conductive composite of CNTs/PDMS film and the sheet resistance of the composite film reached 21.0 kΩ/□. Furthermore, the packaged PDMS/CNTs/PDMS (PCP) strain sensors with a sandwich-like structure exhibited satisfactory sensitivity with a gauge factor of 3.4 at 50% strain, a large working range (89%), and excellent stability (>8000 cycles). The easy-making and low-cost sensors show great potential in wearable electronics, real-time motion detection, and electronic skin.
Open AccessUltrathin CNTs Film Based on Marangoni Effect for Strain Sensing Application
The Marangoni effect has been applied in the preparation of large-area ultrathin films. However, defects occur frequently during the transfer progress of ultrathin films to substrates, which limits its application in scalable and massive fabrication. Carbon nanotubes (CNTs), as typical one-dimensional carbon materials, are widely used in wearable and flexible sensors due to their outstanding electrical and mechanical properties. In this paper, Marangoni-driven self-assembled CNTs film was obtained by injecting 0.5 mL 1 mg·mL−1 CNTs/ethanol dispersion on 100 cm2 water dropwise; the thickness, sheet resistance, and optical transmittance (at 550 nm) of the as-prepared ultrathin film were 38 nm, 7.3 kΩ/□, and 66.9%, respectively. The CNTs film was transferred onto polydimethylsiloxane (PDMS) to prepare a conductive composite of CNTs/PDMS film and the sheet resistance of the composite film reached 21.0 kΩ/□. Furthermore, the packaged PDMS/CNTs/PDMS (PCP) strain sensors with a sandwich-like structure exhibited satisfactory sensitivity with a gauge factor of 3.4 at 50% strain, a large working range (89%), and excellent stability (>8000 cycles). The easy-making and low-cost sensors show great potential in wearable electronics, real-time motion detection, and electronic skin.
- Open Access
Effects of Graphene Morphology on Properties of Carbon Nanotube/Polyurethane Film Strain Sensors
The film flexible sensors can convert tiny changes in size or force into electrical signals. They are key components of intelligent devices and wearable devices, and are widely used in human-computer interaction, electronic skin, health monitoring, implantable diagnosis, and other fields. This kind of sensor is generally composed of polymer matrix and conductive components, while carbon nanotubes (CNT) and graphene (GN), as typical one-dimensional and two-dimensional conductive carbon nano-materials, respectively, have been used to build film flexible sensors. In order to explore the relationship between the GN size and thickness, and the performance of film sensors, the GN-CNT/PU composite film sensors were prepared by in situ polymerization of polyurethane (PU) in the presence of GN and CNT. A highly sensitive GN-CNT/PU flexible film sensor was prepared with a high gauge factor (GF) up to 13.15 in a strain range of 0–20%; an exceptionally low percolation threshold of GN is about 0.04 vol% when the CNT content is fixed at 0.2 vol%, which is below the percolation threshold of CNT/PU nanocomposites. The size of the GN layer affects the GFs of the flexible film sensors; a GN with a smaller size can achieve a greater GF. This study paves the way for the better application of different qualities of GN in flexible sensors.
Open AccessEffects of Graphene Morphology on Properties of Carbon Nanotube/Polyurethane Film Strain Sensors
The film flexible sensors can convert tiny changes in size or force into electrical signals. They are key components of intelligent devices and wearable devices, and are widely used in human-computer interaction, electronic skin, health monitoring, implantable diagnosis, and other fields. This kind of sensor is generally composed of polymer matrix and conductive components, while carbon nanotubes (CNT) and graphene (GN), as typical one-dimensional and two-dimensional conductive carbon nano-materials, respectively, have been used to build film flexible sensors. In order to explore the relationship between the GN size and thickness, and the performance of film sensors, the GN-CNT/PU composite film sensors were prepared by in situ polymerization of polyurethane (PU) in the presence of GN and CNT. A highly sensitive GN-CNT/PU flexible film sensor was prepared with a high gauge factor (GF) up to 13.15 in a strain range of 0–20%; an exceptionally low percolation threshold of GN is about 0.04 vol% when the CNT content is fixed at 0.2 vol%, which is below the percolation threshold of CNT/PU nanocomposites. The size of the GN layer affects the GFs of the flexible film sensors; a GN with a smaller size can achieve a greater GF. This study paves the way for the better application of different qualities of GN in flexible sensors.
- RetractedOpen Access
- 12 May 2022
- Published by Wiley in Computational and Mathematical Methods in Medicine
- Vol. 2022, 1-14
A Three-Dimensional Cement Quantification Method for Decision Prediction of Vertebral Recompression after Vertebroplasty
Objective. Proposing parameters to quantify cement distribution and increasing accuracy for decision prediction of vertebroplasty postoperative complication. Methods. Finite element analysis was used to biomechanically assess vertebral mechanics ( ) after percutaneous vertebroplasty (PVP) or kyphoplasty (PKP). The vertebral space was divided into 27 portions. The numbers of cement occupied portions and numbers of cement-endplate contact portions were defined as overall distribution number (oDN) and overall endplate contact number (oEP), respectively. And cement distribution was parametrized by oDN and oEP. The determination coefficients of vertebral mechanics and parameters () can validate the correlation of proposed parameters with vertebral mechanics. Results. oDN and oEP were mainly correlated with failure load ( ) and stiffness ( ), respectively. oDN, oEP, failure load, and stiffness had obvious difference between the PVP group and the PKP group ( ). The regional endplate contact number in the front column is most correlated with vertebral stiffness ( ) among all regional parameters. Cement volume and volume fraction are not dominant factors of vertebral augmentation, and they are not suitable for postoperative fracture risk prediction. Conclusions. Proposed parameters with high correlation on vertebral mechanics are promising for clinical utility. The oDN and oEP can strongly affect augmented vertebral mechanics thus is suitable for postoperative fracture risk prediction. The parameters are beneficial for decision-making process of revision surgery necessity. Parametrized methods are also favorable for surgeon’s preoperative planning. The methods can be inspirational for clinical image recognition development and auxiliary diagnosis.
- 12 May 2022
- Published by Wiley in Computational and Mathematical Methods in Medicine
- Vol. 2022, 1-14
RetractedOpen AccessA Three-Dimensional Cement Quantification Method for Decision Prediction of Vertebral Recompression after Vertebroplasty
Objective. Proposing parameters to quantify cement distribution and increasing accuracy for decision prediction of vertebroplasty postoperative complication. Methods. Finite element analysis was used to biomechanically assess vertebral mechanics ( ) after percutaneous vertebroplasty (PVP) or kyphoplasty (PKP). The vertebral space was divided into 27 portions. The numbers of cement occupied portions and numbers of cement-endplate contact portions were defined as overall distribution number (oDN) and overall endplate contact number (oEP), respectively. And cement distribution was parametrized by oDN and oEP. The determination coefficients of vertebral mechanics and parameters () can validate the correlation of proposed parameters with vertebral mechanics. Results. oDN and oEP were mainly correlated with failure load ( ) and stiffness ( ), respectively. oDN, oEP, failure load, and stiffness had obvious difference between the PVP group and the PKP group ( ). The regional endplate contact number in the front column is most correlated with vertebral stiffness ( ) among all regional parameters. Cement volume and volume fraction are not dominant factors of vertebral augmentation, and they are not suitable for postoperative fracture risk prediction. Conclusions. Proposed parameters with high correlation on vertebral mechanics are promising for clinical utility. The oDN and oEP can strongly affect augmented vertebral mechanics thus is suitable for postoperative fracture risk prediction. The parameters are beneficial for decision-making process of revision surgery necessity. Parametrized methods are also favorable for surgeon’s preoperative planning. The methods can be inspirational for clinical image recognition development and auxiliary diagnosis.