The Influence of the Synthesis Method on the Characteristics of BaTiO3
Open Access
Abstract
In this work, barium titanate powders were produced by sol-gel and sol-precipitation methods from metal alkoxides. In the sol-gel method, tetraisopropyl orthotitanate was mixed with 2-propanol, acetic acid and barium acetate, and the gel samples obtained were calcined at 600 °C, 800 °C and 1000 °C. Through the sol-precipitation method, tetraisopropyl orthotitanate was mixed with acetic acid and deionized water and precipitated by the addition of a concentrated solution of KOH. The products were calcined at various temperatures, and the microstructural and dielectric properties of the BaTiO3 prepared for the two processes were analyzed and compared. The results of these analyses allowed us to observe an increase in the tetragonal phase and the dielectric constant (15–50 at 20 kHz) with increasing temperatures in the samples produced by the sol-gel method, while the sample obtained by sol precipitation was cubic. The presence of BaCO3 is more evident in the sample produced by sol-precipitation, and the band gap of the products obtained did not show significant variation, changing the synthesis method (3.363–3.594 eV).Keywords
Funding Information
- Fundação de Apoio à Pesquisa do Distrito Federal (00193.00002140/2018-1)
This publication has 16 references indexed in Scilit:
- Effects of heat treatment and particle size on the tetragonality of nano-sized barium titanate powderCeramics International, 2007
- Synthesis of Tetragonal Barium Titanate Nanoparticles Via Alkoxide–Hydroxide Sol‐Precipitation: Effect of Water AdditionJournal of the American Ceramic Society, 2006
- Dielectric Properties of BaTiO3 Films Prepared by RF-Plasma Chemical Vapor DepositionJapanese Journal of Applied Physics, 2005
- Synthesis of barium titanate improved by modifications in the kinetics of the solid state reactionJournal of the European Ceramic Society, 2000
- Characterization of Barium Titanate Powders: Barium Carbonate IdentificationJournal of the American Ceramic Society, 1999
- Preparation and ferroelectric phase transition studies of nanocrystalline BaTiO3Nanostructured Materials, 1997
- Low temperature synthesis and dielectric properties of ceramics derived from amorphous barium titanate gels and crystalline powdersMaterials Science and Engineering: B, 1989
- Dielectric properties of fine-grained barium titanate ceramicsJournal of Applied Physics, 1985
- Phase Equilibria in the System BaO–TiO 2Journal of the American Ceramic Society, 1955
- A Method for Growing Barium Titanate Single CrystalsJournal of the American Chemical Society, 1954