T1 phase-mediated low cycle fatigue behavior and hardening/softening mechanism in a strong-ductile Al-Cu-Li alloy

Authors:
  • CWChuancai Wang
    Chuancai Wang
  • YYYi Yang
    Yi Yang
  • LQLiwei Quan
    Liwei Quan
  • XXXinjian Xie
    Xinjian Xie
  • FLFei Liu
    Fei Liu
  • YZYong Zhang
    Yong Zhang
  • XZX. Zheng
    X. Zheng
  • SZShijian Zheng
    Shijian Zheng

Abstract
The main strengthening T1 phase plays a crucial role in mechanical properties of aluminum-copper-lithium (Al-Cu-Li) alloys. However, their fatigue behavior and properties are usually suggested to be associated with one-step shear deformation of T1 phase. Here, we studied T1 phase-mediated low-cycle fatigue (LCF) behavior and hardening/softening mechanism in a cyclic pre-deformed Al-Cu-Li alloy subjected to peak-aging. The peak-aged alloy obtained the peak microhardness of 190 HV, yield strength of ~570 MPa, and fracture elongation of ~17%. Our peak-aged alloy also exhibited distinct LCF behavior of cyclic stability, hardening or/and softening at different strain amplitude, while its fatigue life decreased with the strain amplitude increasing. Experimental observations indicated that single-layer T1 phase dominated the peak-aged alloy. We found that T1 phase, especially those in slip bands, were subjected to severe reaction with abundant slip dislocations during LCF, producing one-layer or multi-layer steps at T1-matrix interfaces. Importantly, initial resistance of T1 phase to dislocations provided the cyclic hardening at early stage of high strain amplitude (0.7% or 0.8%). With the increasing of fatigue cycles and strain accumulations, dynamic balance between resistance of T1 phase and continuous dislocation slip could lead to the cyclic stability, especially at low strain amplitude (0.5% or 0.6%). However, profuse T1 precipitates were sheared by slip dislocations severely, especially those in slip bands, resulting in the cyclic softening at high strain amplitude (0.8% or 1.0%). Our experimental results provide insights into the influence of dislocation-T1 reactions on LCF properties and cyclic hardening/softening behavior of Al-Cu-Li alloys.