Haichao Hu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Haichao Hu has a total of 45 co-authors. Here are the top co-authors by number of shared publications:
- Quanjin Ma
Universiti Malaysia Pahang Al-Sultan Abdullah
4 shared publications Chuancai Wang
3 shared publications- Qiang Wei
School of Mechanical Engineering, Hebei University of Technology, Tianjin 300130, China
3 shared publications - Chuancai Wang
School of Mechanical Engineering, Tianjin Sino-German University of Applied Sciences, Tianjin 300350, China
2 shared publications - Fengqi Li
School of Mechanical Engineering, Tianjin Sino-German University of Applied Sciences, Tianjin 300350, China
2 shared publications Liwei Quan
2 shared publications
Latest Publications
- Open Access
- 11 August 2026
- Published by Elsevier in SSRN Electronic Journal
T1 phase-mediated low cycle fatigue behavior and hardening/softening mechanism in a strong-ductile Al-Cu-Li alloy
The main strengthening T1 phase plays a crucial role in mechanical properties of aluminum-copper-lithium (Al-Cu-Li) alloys. However, their fatigue behavior and properties are usually suggested to be associated with one-step shear deformation of T1 phase. Here, we studied T1 phase-mediated low-cycle fatigue (LCF) behavior and hardening/softening mechanism in a cyclic pre-deformed Al-Cu-Li alloy subjected to peak-aging. The peak-aged alloy obtained the peak microhardness of 190 HV, yield strength of ~570 MPa, and fracture elongation of ~17%. Our peak-aged alloy also exhibited distinct LCF behavior of cyclic stability, hardening or/and softening at different strain amplitude, while its fatigue life decreased with the strain amplitude increasing. Experimental observations indicated that single-layer T1 phase dominated the peak-aged alloy. We found that T1 phase, especially those in slip bands, were subjected to severe reaction with abundant slip dislocations during LCF, producing one-layer or multi-layer steps at T1-matrix interfaces. Importantly, initial resistance of T1 phase to dislocations provided the cyclic hardening at early stage of high strain amplitude (0.7% or 0.8%). With the increasing of fatigue cycles and strain accumulations, dynamic balance between resistance of T1 phase and continuous dislocation slip could lead to the cyclic stability, especially at low strain amplitude (0.5% or 0.6%). However, profuse T1 precipitates were sheared by slip dislocations severely, especially those in slip bands, resulting in the cyclic softening at high strain amplitude (0.8% or 1.0%). Our experimental results provide insights into the influence of dislocation-T1 reactions on LCF properties and cyclic hardening/softening behavior of Al-Cu-Li alloys.
- 11 August 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessT1 phase-mediated low cycle fatigue behavior and hardening/softening mechanism in a strong-ductile Al-Cu-Li alloy
The main strengthening T1 phase plays a crucial role in mechanical properties of aluminum-copper-lithium (Al-Cu-Li) alloys. However, their fatigue behavior and properties are usually suggested to be associated with one-step shear deformation of T1 phase. Here, we studied T1 phase-mediated low-cycle fatigue (LCF) behavior and hardening/softening mechanism in a cyclic pre-deformed Al-Cu-Li alloy subjected to peak-aging. The peak-aged alloy obtained the peak microhardness of 190 HV, yield strength of ~570 MPa, and fracture elongation of ~17%. Our peak-aged alloy also exhibited distinct LCF behavior of cyclic stability, hardening or/and softening at different strain amplitude, while its fatigue life decreased with the strain amplitude increasing. Experimental observations indicated that single-layer T1 phase dominated the peak-aged alloy. We found that T1 phase, especially those in slip bands, were subjected to severe reaction with abundant slip dislocations during LCF, producing one-layer or multi-layer steps at T1-matrix interfaces. Importantly, initial resistance of T1 phase to dislocations provided the cyclic hardening at early stage of high strain amplitude (0.7% or 0.8%). With the increasing of fatigue cycles and strain accumulations, dynamic balance between resistance of T1 phase and continuous dislocation slip could lead to the cyclic stability, especially at low strain amplitude (0.5% or 0.6%). However, profuse T1 precipitates were sheared by slip dislocations severely, especially those in slip bands, resulting in the cyclic softening at high strain amplitude (0.8% or 1.0%). Our experimental results provide insights into the influence of dislocation-T1 reactions on LCF properties and cyclic hardening/softening behavior of Al-Cu-Li alloys.
- 1 April 2026
- Published by Wiley in Polymer Composites
- Vol. 47 (12) , 11497-11516
Machine Learning‐Assisted Prediction of Low‐Velocity Impact Resistance in CFRP /Steel Hybrid Laminates
Fiber metal laminates are promising lightweight structural materials, but remain susceptible to hidden internal damage under low‐velocity impact. This study investigates the impact resistance of CFRP/DP590 hybrid laminates with and without adhesive‐film interlayers. A non‐adhesive configuration and an adhesive‐toughened configuration were fabricated and tested following ASTM D7136. Multi‐scale characterization revealed energy‐dependent damage evolution in Structure A, from matrix cracking and interfacial delamination at 5–10 J, to resin shear failure and fiber fracture at 20–30 J, and pronounced delamination accompanied by a plateau‐like force response at 40 J. In contrast, Structure B showed markedly improved impact tolerance, with a 41% increase in peak load (10.6 kN) and a 75.5% reduction in damage area at 40 J. The adhesive interlayers suppressed delamination and redirected energy dissipation toward progressive fiber fracture. A temporal neural network was developed to reconstruct impact force–time histories of Structure A. Trained on data at 5, 20, 30, and 40 J and evaluated across different impact energies, the model showed good agreement with experiments, with the most balanced accuracy at 20 J (MAE = 278 N, MAPE = 13.7%, R 2 = 0.976). A comparison with non‐temporal regression approaches suggested the advantage of explicitly representing temporal evolution in force–time responses. Overall, the study demonstrates that interface engineering critically governs damage mechanisms and impact tolerance of CFRP/steel hybrid laminates, and that combining adhesive interlayers with data‐driven temporal modeling offers a practical framework for impact assessment and design in automotive and rail applications.
- 1 April 2026
- Published by Wiley in Polymer Composites
- Vol. 47 (12) , 11497-11516
Machine Learning‐Assisted Prediction of Low‐Velocity Impact Resistance in CFRP /Steel Hybrid Laminates
Fiber metal laminates are promising lightweight structural materials, but remain susceptible to hidden internal damage under low‐velocity impact. This study investigates the impact resistance of CFRP/DP590 hybrid laminates with and without adhesive‐film interlayers. A non‐adhesive configuration and an adhesive‐toughened configuration were fabricated and tested following ASTM D7136. Multi‐scale characterization revealed energy‐dependent damage evolution in Structure A, from matrix cracking and interfacial delamination at 5–10 J, to resin shear failure and fiber fracture at 20–30 J, and pronounced delamination accompanied by a plateau‐like force response at 40 J. In contrast, Structure B showed markedly improved impact tolerance, with a 41% increase in peak load (10.6 kN) and a 75.5% reduction in damage area at 40 J. The adhesive interlayers suppressed delamination and redirected energy dissipation toward progressive fiber fracture. A temporal neural network was developed to reconstruct impact force–time histories of Structure A. Trained on data at 5, 20, 30, and 40 J and evaluated across different impact energies, the model showed good agreement with experiments, with the most balanced accuracy at 20 J (MAE = 278 N, MAPE = 13.7%, R 2 = 0.976). A comparison with non‐temporal regression approaches suggested the advantage of explicitly representing temporal evolution in force–time responses. Overall, the study demonstrates that interface engineering critically governs damage mechanisms and impact tolerance of CFRP/steel hybrid laminates, and that combining adhesive interlayers with data‐driven temporal modeling offers a practical framework for impact assessment and design in automotive and rail applications.
- Open Access
Theoretical Prediction Method for Tensile Properties of High-Strength Steel/Carbon Fiber-Reinforced Polymer Laminates
This study introduces a method for predicting the tensile properties of high-strength steel/carbon fiber-reinforced polymer (CFRP) composite laminates using Metal Volume Fraction (MVF) theory. DP590 and DP980 high-strength steels (thickness ~0.8 mm) were selected as substrates, and composite laminates were fabricated by compression molding with CFRP prepreg. Tensile tests were performed on an MTS universal testing machine, and fracture morphology was analyzed using scanning electron microscopy (SEM). The results demonstrated a typical mixed failure mode: necking and fracture in the metal layer, and neat fiber fracture in the CFRP layer. Comparisons of experimental tensile strength with theoretical predictions revealed that the model based on the metal strength at fracture significantly outperformed the model using tensile strength for predictions, with narrower error ranges. For example, the error for DP590/CFRP laminates ranged from 2.31% to 12.89%, whereas for DP980/CFRP laminates, it was –6.12%. Additionally, the study showed that using metals with higher plasticity in fiber metal laminates could underutilize the metal layer’s potential at peak stress, leading to significant deviations when predictions rely on tensile strength. Therefore, it is recommended to use the metal strength corresponding to peak stress for more accurate MVF-based tensile property predictions. This method provides a robust theoretical foundation for predicting the tensile performance of high-strength steel/CFRP laminates, aiding in optimizing structural designs for automotive and aerospace applications. Future research could explore the effects of different metal and fiber combinations, as well as more complex stacking designs.
Open AccessTheoretical Prediction Method for Tensile Properties of High-Strength Steel/Carbon Fiber-Reinforced Polymer Laminates
This study introduces a method for predicting the tensile properties of high-strength steel/carbon fiber-reinforced polymer (CFRP) composite laminates using Metal Volume Fraction (MVF) theory. DP590 and DP980 high-strength steels (thickness ~0.8 mm) were selected as substrates, and composite laminates were fabricated by compression molding with CFRP prepreg. Tensile tests were performed on an MTS universal testing machine, and fracture morphology was analyzed using scanning electron microscopy (SEM). The results demonstrated a typical mixed failure mode: necking and fracture in the metal layer, and neat fiber fracture in the CFRP layer. Comparisons of experimental tensile strength with theoretical predictions revealed that the model based on the metal strength at fracture significantly outperformed the model using tensile strength for predictions, with narrower error ranges. For example, the error for DP590/CFRP laminates ranged from 2.31% to 12.89%, whereas for DP980/CFRP laminates, it was –6.12%. Additionally, the study showed that using metals with higher plasticity in fiber metal laminates could underutilize the metal layer’s potential at peak stress, leading to significant deviations when predictions rely on tensile strength. Therefore, it is recommended to use the metal strength corresponding to peak stress for more accurate MVF-based tensile property predictions. This method provides a robust theoretical foundation for predicting the tensile performance of high-strength steel/CFRP laminates, aiding in optimizing structural designs for automotive and aerospace applications. Future research could explore the effects of different metal and fiber combinations, as well as more complex stacking designs.
- 4 February 2025
- Published by Elsevier in Materials Characterization
- Vol. 222
Dislocation-assisted bending and fracture of MgAlB4 whiskers in an aluminum matrix composite
- 4 February 2025
- Published by Elsevier in Materials Characterization
- Vol. 222
Dislocation-assisted bending and fracture of MgAlB4 whiskers in an aluminum matrix composite
- 1 August 2024
- Published by Taylor & Francis in Mechanics of Advanced Materials and Structures
- Vol. 32 (11) , 2635-2657
Numerical modeling of composite spherical-roof contoured core (SRCC) sandwich panels subjected to blast loading
- 1 August 2024
- Published by Taylor & Francis in Mechanics of Advanced Materials and Structures
- Vol. 32 (11) , 2635-2657
Numerical modeling of composite spherical-roof contoured core (SRCC) sandwich panels subjected to blast loading
- Open Access
Experimental and Numerical Investigation Integrated with Machine Learning (ML) for the Prediction Strategy of DP590/CFRP Composite Laminates
This study unveils a machine learning (ML)-assisted framework designed to optimize the stacking sequence and orientation of carbon fiber-reinforced polymer (CFRP)/metal composite laminates, aiming to enhance their mechanical properties under quasi-static loading conditions. This work pioneers the expansion of initial datasets for ML analysis in the field by uniquely integrating the experimental results with finite element simulations. Nine ML models, including XGBoost and gradient boosting, were assessed for their precision in predicting tensile and bending strengths. The findings reveal that the XGBoost and gradient boosting models excel in tensile strength prediction due to their low error rates and high interpretability. In contrast, the decision trees, K-nearest neighbors (KNN), and random forest models show the highest accuracy in bending strength predictions. Tree-based models demonstrated exceptional performance across various metrics, notably for CFRP/DP590 laminates. Additionally, this study investigates the impact of layup sequences on mechanical properties, employing an innovative combination of ML, numerical, and experimental approaches. The novelty of this study lies in the first-time application of these ML models to the performance optimization of CFRP/metal composites and in providing a novel perspective through the comprehensive integration of experimental, numerical, and ML methods for composite material design and performance prediction.
Open AccessExperimental and Numerical Investigation Integrated with Machine Learning (ML) for the Prediction Strategy of DP590/CFRP Composite Laminates
This study unveils a machine learning (ML)-assisted framework designed to optimize the stacking sequence and orientation of carbon fiber-reinforced polymer (CFRP)/metal composite laminates, aiming to enhance their mechanical properties under quasi-static loading conditions. This work pioneers the expansion of initial datasets for ML analysis in the field by uniquely integrating the experimental results with finite element simulations. Nine ML models, including XGBoost and gradient boosting, were assessed for their precision in predicting tensile and bending strengths. The findings reveal that the XGBoost and gradient boosting models excel in tensile strength prediction due to their low error rates and high interpretability. In contrast, the decision trees, K-nearest neighbors (KNN), and random forest models show the highest accuracy in bending strength predictions. Tree-based models demonstrated exceptional performance across various metrics, notably for CFRP/DP590 laminates. Additionally, this study investigates the impact of layup sequences on mechanical properties, employing an innovative combination of ML, numerical, and experimental approaches. The novelty of this study lies in the first-time application of these ML models to the performance optimization of CFRP/metal composites and in providing a novel perspective through the comprehensive integration of experimental, numerical, and ML methods for composite material design and performance prediction.
- Open Access
Progressive Damage Behaviour Analysis and Comparison with 2D/3D Hashin Failure Models on Carbon Fibre–Reinforced Aluminium Laminates
It is known that carbon fibre–reinforced aluminium laminate is the third generation of fibre metal materials. This study investigates the response of carbon fibre–reinforced aluminium laminates (CARALL) under tensile loading and three-point bending tests, which evaluate the damage initiation and propagation mechanism. The 2D Hashin and 3D Hashin VUMAT models are used to analyse and compare each composite layer for finite element modelling. A bilinear cohesive contact model is modelled for the interface failure, and the Johnson cook model describes the aluminium layer. The mechanical response and failure analysis of CARALL were evaluated using load versus deflection curves, and the scanning electron microscope was adopted. The results revealed that the failure modes of CARALL were mainly observed in the aluminium layer fracture, fibre pull-out, fracture, and matrix tensile fracture under tensile and flexural loading conditions. The 2D Hashin and 3D Hashin models were similar in predicting tensile properties, flexural properties, mechanical response before peak load points, and final failure modes. It is highlighted that the 3D Hashin model can accurately reveal the failure mechanism and failure propagation mechanism of CARALL.
Open AccessProgressive Damage Behaviour Analysis and Comparison with 2D/3D Hashin Failure Models on Carbon Fibre–Reinforced Aluminium Laminates
It is known that carbon fibre–reinforced aluminium laminate is the third generation of fibre metal materials. This study investigates the response of carbon fibre–reinforced aluminium laminates (CARALL) under tensile loading and three-point bending tests, which evaluate the damage initiation and propagation mechanism. The 2D Hashin and 3D Hashin VUMAT models are used to analyse and compare each composite layer for finite element modelling. A bilinear cohesive contact model is modelled for the interface failure, and the Johnson cook model describes the aluminium layer. The mechanical response and failure analysis of CARALL were evaluated using load versus deflection curves, and the scanning electron microscope was adopted. The results revealed that the failure modes of CARALL were mainly observed in the aluminium layer fracture, fibre pull-out, fracture, and matrix tensile fracture under tensile and flexural loading conditions. The 2D Hashin and 3D Hashin models were similar in predicting tensile properties, flexural properties, mechanical response before peak load points, and final failure modes. It is highlighted that the 3D Hashin model can accurately reveal the failure mechanism and failure propagation mechanism of CARALL.
- 1 November 2021
- Published by Elsevier in Thin-Walled Structures
- Vol. 168
Characterization of progressive damage behaviour and failure mechanism of carbon fibre reinforced DP590 laminates
- 1 November 2021
- Published by Elsevier in Thin-Walled Structures
- Vol. 168
Characterization of progressive damage behaviour and failure mechanism of carbon fibre reinforced DP590 laminates