Development of Lattice-Mismatched GaInAsP for Radiation Hardness
- 31 October 2019
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 10 (1) , 103-108
Abstract
We develop lattice-mismatched GaInAsP as an alternative alloy to pure As-based alloys currently used in III–V multijunction solar cells. Increasing the alloy phosphorous and indium content while maintaining an optimal bandgap may allow high efficiency multijunction devices with increased radiation hardness. Here, 1.0-eV GaInAsP is developed and implemented into single and multijunction solar cell devices. The lattice-mismatched GaInAsP must be grown strain free, and the subcell thickness must be maintained below the thickness where surface-driven phase separation occurs. As observed in transmission electron microscopy and cathodoluminescence imaging, phase separation strengthens in the GaInAsP layer and leads to interfacial defect formation when the cell thickness is too great. We show single junction 1.0-eV Ga 0.5 In 0.5 As 0.7 P 0.3 with excellent carrier collection and a bandgap-voltage offset of 0.40 V. This material quality approaches that of 1.0-eV Ga 0.7 In 0.3 As used in inverted metamorphic multijunction devices, but has increased phosphorus content and consequently is expected to have a higher radiation resistance. We incorporate the 1.0-eV GaInAsP subcell into a 3-junction inverted metamorphic solar cell to test the performance of the subcell in a multijunction. No additional loss is observed upon integration into a multijunction cell: both the carrier collection and voltage of the GaInAsP subcell are unchanged from single junction devices. While further materials development and radiation testing is still required, these preliminary results indicate that lattice-mismatched GaInAsP can be effectively used in multijunction solar cells to replace radiation-soft materials.Keywords
Funding Information
- Northrop Grumman
- Space Solar Power Initiative
- The Aerospace Corporation
- U.S. Department of Energy (DE-AC36-08GO28308)
- Sustainable Energy, LLC
- National Laboratory of the Rockies
- California Institute of Technology (CRD-17-704)
- NSF (DMR 1720256)
- National Science Foundation (1650114)
This publication has 17 references indexed in Scilit:
- Metamorphic III–V Solar Cells: Recent Progress and PotentialIEEE Journal of Photovoltaics, 2015
- Generalized Optoelectronic Model of Series-Connected Multijunction Solar CellsIEEE Journal of Photovoltaics, 2015
- Spontaneous lateral phase separation of AlInP during thin film growth and its effect on luminescenceJournal of Applied Physics, 2015
- Improved radiation resistance of epitaxial lift-off inverted metamorphic solar cells2013
- Reduction of crosshatch roughness and threading dislocation density in metamorphic GaInP buffers and GaInAs solar cellsJournal of Applied Physics, 2012
- High-efficiency GaInP∕GaAs∕InGaAs triple-junction solar cells grown inverted with a metamorphic bottom junctionApplied Physics Letters, 2007
- Radiation-resistant solar cells for space useSolar Energy Materials and Solar Cells, 2001
- Transmission electron microscope and transmission electron diffraction observations of alloy clustering in liquid-phase epitaxial (001) GaInAsP layersJournal of Applied Physics, 1985
- Calculation of Miscibility Gap in Quaternary InGaPAs with Strictly Regular Solution ApproximationJapanese Journal of Applied Physics, 1982
- Bandgap and lattice constant of GaInAsP as a function of alloy compositionJournal of Electronic Materials, 1974