Use of rice husk as hot tipping on steel casting parts
Open Access
- 1 January 2024
- journal article
- research article
- Published by Universidad de Antioquia in Revista Facultad de Ingeniería Universidad de Antioquia
- No. 112
Abstract
The use of feeding aids in the foundry process has become widespread globally recent decades, leading to increased efficiency. This article examines the characterization of rice husks, their ashes, and their positive impact as hot topping on the efficiency of open risers in casting cylindrical parts made of AISI 1045 steel. The rice husks were analyzed through X-Ray Diffraction test, Thermal-Gravimetric Analysis, and Differential Thermal-Gravimetric Analysis, while the ashes were characterized using X-Ray Diffraction. The analyzed rice husks were found to contain cellulose and low crystallinity silicon, whereas the ashes primarily consisted of cristobalite and tridymite. It was observed that the thermal decomposition of rice husks occurs in three stages, with approximately 81% of the mass lost during their combustion as hot topping on liquid steel. The location of cavities contraction in the risers of casting parts was made through longitudinal cut of the part-riser system. The increase in the rice husks topping layer thickness positively influences the concentration of these cavities on the upper surface and enhances the feeder's efficiency.Keywords
This publication has 25 references indexed in Scilit:
- Thermal decomposition, kinetics and combustion parameters determination for two different sizes of rice husk using TGAEngineering in Agriculture, Environment and Food, 2019
- Comparative techno-economic assessment and environmental impacts of rice husk-to-fuel conversion technologiesEnergy, 2018
- Thermophysical Properties and Performance of Riser Sleeves for Steel CastingsInternational Journal of Metalcasting, 2016
- Pyrolysis kinetics of hazelnut husk using thermogravimetric analysisBioresource Technology, 2014
- Determination of Silica Activity Index and XRD, SEM and EDS Studies of Amorphous SiO2 Extracted from Rice Husk AshTransactions of the Indian Institute of Metals, 2011
- Effect of calcination temperature and heating rate on the optical properties and reactivity of rice husk ashJournal of Materials Science, 2006
- Physical and thermochemical characterization of rice husk char as a potential biomass energy sourceBioresource Technology, 2006
- Toward an aggregated understanding of enzymatic hydrolysis of cellulose: Noncomplexed cellulase systemsBiotechnology and Bioengineering, 2004
- Investigation of thermal decomposition of rice huskThermochimica Acta, 1985
- Thermal insulations from rice husk ash, an agricultural wasteCeramurgia International, 1980