A numerical study on effects of heat transfer fluids, copper mesh in packed bed and porosity, on charging time of paraffin based packed bed thermal energy storage
Authors:
Open Access
- 9 May 2021
- journal article
- research article
- Published by Wiley in Energy Storage
- Vol. 3 (5) , e254
Abstract
In this study, a novel configuration of the latent heat thermal energy storage module based on the packed bed of encapsulated phase change material is investigated. The module is modeled and simulated using a Multiphysics tool COMSOL. The simulation results are validated with the experimental data. Using the validated model, initially, water was used as heat transfer fluid, and then refrigerant R‐134 and R‐22 were also used as heat transfer fluid (HTF) to predict the impact on the charging time. The comparison in terms of their thermo‐physical properties is also carried out. The results indicated that by using refrigerants (R‐134 and R‐22) as HTF, decreased the charging time. When the water was used as HTF, it took 11 hours to completely charge the system. Whereas, the charging time for R‐134 and R‐22 was 8.75 and 8.4 hours, respectively. It was also observed that edges of packed bed were melting much slower than the remaining bed. Therefore, to increase the transfer of heat near the edges, geometry of the module is modified and their impact is investigated.Keywords
Funding Information
- Higher Education Commission, Pakistan (NRPU 5550)
This publication has 27 references indexed in Scilit:
- Performance comparison of sensible and latent heat-based thermal storage system during discharging – an experimental studyExperimental Heat Transfer, 2020
- A review of numerical modelling of high-temperature phase change material composites for solar thermal energy storageJournal of Energy Storage, 2020
- Organic phase change materials confined in carbon-based materials for thermal properties enhancement: Recent advancement and challengesRenewable and Sustainable Energy Reviews, 2019
- A review on encapsulation techniques for inorganic phase change materials and the influence on their thermophysical propertiesRenewable and Sustainable Energy Reviews, 2017
- Experimental and numerical investigation of a tube-in-tank latent thermal energy storage unit using composite PCMApplied Energy, 2017
- Melting heat transfer characteristics of a composite phase change material fabricated by paraffin and metal foamApplied Energy, 2017
- From anisotropic graphene aerogels to electron- and photo-driven phase change compositesJournal of Materials Chemistry A, 2016
- Analysis of HTFs, PCMs and fins effects on the thermal performance of shell–tube thermal energy storage unitsSolar Energy, 2015
- Solar Energy Storage MethodsIndustrial & Engineering Chemistry Research, 2011
- A review on phase change energy storage: materials and applicationsEnergy Conversion and Management, 2004