Recycled Polystyrene as a Sustainable Material for Hollow Fiber Membranes in Dye Filtration
Authors:
- Mauricio Huhn-IbarraMHMauricio Huhn-Ibarra
- Libia Madai Itza-UitzilLILibia Madai Itza-Uitzil
- Marcial Yam-CervantesMYMarcial Yam-Cervantes
- Abigail González-DíazAGAbigail González-Díaz
- Fernando José Zapata-CatzinFZFernando José Zapata-Catzin
- Javier Ivan Cauich-CupulJCJavier Ivan Cauich-Cupul
- Manuel Aguilar-VegaMAManuel Aguilar-Vega
- Maria Ortencia González-DíazMaria Ortencia González-Díaz
Open Access
- 23 September 2025
- Vol. 15 (10) , 285
Abstract
Expanded polystyrene (EPS) waste was chemically modified by sulfonation to obtain sulfonated EPS (sEPS), which was subsequently blended with virgin polyphenylsulfone (PPSU) at concentrations ranging from 10 to 50% to elaborate hollow fiber membranes for dye removal. The membranes were elaborated by non-solvent-induced phase separation and characterized by scanning electron microscopy, mechanical properties, antifouling, water flux measurements, and dye rejection performance. Scanning electron microscopy images of PPSU/sEPS blends showed well-defined membrane cross-sections with no polymer segregation up to 30% recycled EPS content, indicating improved compatibility due to EPS sulfonation. The HFMs present mean pore radii ranging from 4.2 ± 0.5 to 11.1 ± 1.0 nm with porosity up to 80%. Water flux improved significantly from 3.1 to 21.2 L m−2 h−1 at 2 bar as sEPS content increased. Dye rejection performance was promising, with Reactive Black 5 rejection ranging from 77% to 99%. The 80/20s PPSU/sEPS membrane showed the highest Reactive Black 5 rejection at 98.3% and revealed a 70.3% rejection in a 24 h dye mixture test. Furthermore, the 70/30s displayed superior anti-fouling properties, achieving a 99.3% flux recovery ratio in a xanthan gum solution at 2 bar. This study demonstrates a novel approach to transform EPS waste into high-performance hollow fiber membrane with competitive antifouling and dye separation properties.Keywords
Funding Information
- Conahcyt Project (CF-2023-I-670)
This publication has 64 references indexed in Scilit:
- Highly effective ultrafiltration membranes based on plastic waste for dye removal from waterWater Environment Research, 2024
- The different impacts of g‐C3N4 nanosheets on PVDF and PSF ultrafiltration membranes for Remazol black 5 dye rejectionJournal of Applied Polymer Science, 2023
- Interfacial Engineering of Polymer Blend with Janus Particle as CompatibilizerChinese Journal of Polymer Science, 2022
- Hansen Solubility Parameters (HSPs): A Reliable Tool for Assessing the Selectivity of Pristine and Hybrid Polymer Nanocomposites in the Presence of Volatile Organic Compounds (VOCs) MixturesMacromolecular Materials and Engineering, 2022
- Determination of Mechanical Strength of Hollow-Fiber Membranes to Optimize Technological ProcessesFibre Chemistry, 2021
- Removal of reactive black 5 from wastewater by membrane filtrationPolymer Bulletin, 2019
- Antibiofouling hollow-fiber membranes for dye rejection by embedding chitosan and silver-loaded chitosan nanoparticlesEnvironmental Chemistry Letters, 2018
- Reactive Compatibilization2014
- Preparation and characterization of poly(vinyl chloride)/polystyrene/poly(ethylene glycol) hollow‐fiber ultrafiltration membranesJournal of Applied Polymer Science, 2013
- Water Wettability and Zeta-Potential of Polystyrene Surface Modified by Ne or Na ImplantationJournal of Colloid and Interface Science, 1998