Mauricio José Huhn‐Ibarra
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mauricio José Huhn‐Ibarra has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Manuel Aguilar-Vega
Centro de Investigación Científica de Yucatán, A.C., Calle 43 No. 130, Chuburná de Hidalgo, Mérida 97200, Yucatán, Mexico
2 shared publications - Maria Ortencia González-Díaz
Centro de Investigación Científica de Yucatán (CICY), Calle 43 No. 130 × 32 y 34, Chuburná de Hidalgo, Mérida 97205, Yucatán, Mexico
2 shared publications - Abigail González-Díaz
El Colegio de Puebla A.C., Av 41 Pte 505, Gabriel Pastor 1ra Secc, Heroica Puebla de Zaragoza 72420, Puebla, Mexico
1 shared publication - Angel de Jesús Montes‐Luna
Centro de Investigación Científica de Yucatán A. C. (CICY), Laboratorio de Membranas, Unidad de Materiales Mérida Mexico
1 shared publication - Fernando José Zapata-Catzin
Centro de Investigación Científica de Yucatán, A.C., Calle 43 No. 130, Chuburná de Hidalgo, Mérida 97200, Yucatán, Mexico
1 shared publication - Javier Ivan Cauich-Cupul
Centro de Investigación Científica de Yucatán, A.C., Calle 43 No. 130, Chuburná de Hidalgo, Mérida 97200, Yucatán, Mexico
1 shared publication
Latest Publications
- Open Access
Recycled Polystyrene as a Sustainable Material for Hollow Fiber Membranes in Dye Filtration
Expanded polystyrene (EPS) waste was chemically modified by sulfonation to obtain sulfonated EPS (sEPS), which was subsequently blended with virgin polyphenylsulfone (PPSU) at concentrations ranging from 10 to 50% to elaborate hollow fiber membranes for dye removal. The membranes were elaborated by non-solvent-induced phase separation and characterized by scanning electron microscopy, mechanical properties, antifouling, water flux measurements, and dye rejection performance. Scanning electron microscopy images of PPSU/sEPS blends showed well-defined membrane cross-sections with no polymer segregation up to 30% recycled EPS content, indicating improved compatibility due to EPS sulfonation. The HFMs present mean pore radii ranging from 4.2 ± 0.5 to 11.1 ± 1.0 nm with porosity up to 80%. Water flux improved significantly from 3.1 to 21.2 L m−2 h−1 at 2 bar as sEPS content increased. Dye rejection performance was promising, with Reactive Black 5 rejection ranging from 77% to 99%. The 80/20s PPSU/sEPS membrane showed the highest Reactive Black 5 rejection at 98.3% and revealed a 70.3% rejection in a 24 h dye mixture test. Furthermore, the 70/30s displayed superior anti-fouling properties, achieving a 99.3% flux recovery ratio in a xanthan gum solution at 2 bar. This study demonstrates a novel approach to transform EPS waste into high-performance hollow fiber membrane with competitive antifouling and dye separation properties.
Open AccessRecycled Polystyrene as a Sustainable Material for Hollow Fiber Membranes in Dye Filtration
Expanded polystyrene (EPS) waste was chemically modified by sulfonation to obtain sulfonated EPS (sEPS), which was subsequently blended with virgin polyphenylsulfone (PPSU) at concentrations ranging from 10 to 50% to elaborate hollow fiber membranes for dye removal. The membranes were elaborated by non-solvent-induced phase separation and characterized by scanning electron microscopy, mechanical properties, antifouling, water flux measurements, and dye rejection performance. Scanning electron microscopy images of PPSU/sEPS blends showed well-defined membrane cross-sections with no polymer segregation up to 30% recycled EPS content, indicating improved compatibility due to EPS sulfonation. The HFMs present mean pore radii ranging from 4.2 ± 0.5 to 11.1 ± 1.0 nm with porosity up to 80%. Water flux improved significantly from 3.1 to 21.2 L m−2 h−1 at 2 bar as sEPS content increased. Dye rejection performance was promising, with Reactive Black 5 rejection ranging from 77% to 99%. The 80/20s PPSU/sEPS membrane showed the highest Reactive Black 5 rejection at 98.3% and revealed a 70.3% rejection in a 24 h dye mixture test. Furthermore, the 70/30s displayed superior anti-fouling properties, achieving a 99.3% flux recovery ratio in a xanthan gum solution at 2 bar. This study demonstrates a novel approach to transform EPS waste into high-performance hollow fiber membrane with competitive antifouling and dye separation properties.
- 6 October 2022
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 139 (47)
PPSU dual layer hollow fiber mixed matrix membranes with functionalized MWCNT for enhanced antifouling, salt and dye rejection in water treatment
Loose nanofiltration dual layer hollow fiber membranes (DLHFM) were prepared from polyphenylsulfone (PPSU) with a thin contact mixed matrix membrane (MMM) outer layer containing functionalized multiwalled carbon nanotubes (MWCNT). Two types of MWCNT were used; oxidized MWCNT (OMWCNT) and polyethyleneimine (PEI) functionalized MWCNT (PEI‐MWCNT). Z potential measurements indicate that OMWCNT and PEI‐MWCNT were negatively charged, being OMWCNT most negative. Na2SO4, MgSO4, and methylene blue (MB) rejection was enhanced due to OMWCNT and PEI‐MWCNT incorporation in DLHFM outer layer. Enhanced hydrophilicity and negatively charge mixed matrix DLHFM layer was the key factor for a better mixed matrix DLHFM performance. The best salt and MB rejection was found in those membranes prepared with (OMWCNT) followed by (PEI‐MWCNT) compared with neat PPSU membranes. An increase of 113% and 100% in Na2SO4 and MB rejection respectively was attained in DLHFM with 0.04 wt%, OMWCNT (relative to dope's weight) in comparison with the neat PPSU membrane. Antifouling test for bovine serum albumin (BSA) and MB showed better performance also for the mixed matrix DLHFM containing OMWCNT's. In antifouling tests, a 4.4% and 25% flux recovery increase for MB and BSA respectively was obtained in DLHFM with 0.04 wt% OMWCNT compared with the neat PPSU DLHFM.
- 6 October 2022
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 139 (47)
PPSU dual layer hollow fiber mixed matrix membranes with functionalized MWCNT for enhanced antifouling, salt and dye rejection in water treatment
Loose nanofiltration dual layer hollow fiber membranes (DLHFM) were prepared from polyphenylsulfone (PPSU) with a thin contact mixed matrix membrane (MMM) outer layer containing functionalized multiwalled carbon nanotubes (MWCNT). Two types of MWCNT were used; oxidized MWCNT (OMWCNT) and polyethyleneimine (PEI) functionalized MWCNT (PEI‐MWCNT). Z potential measurements indicate that OMWCNT and PEI‐MWCNT were negatively charged, being OMWCNT most negative. Na2SO4, MgSO4, and methylene blue (MB) rejection was enhanced due to OMWCNT and PEI‐MWCNT incorporation in DLHFM outer layer. Enhanced hydrophilicity and negatively charge mixed matrix DLHFM layer was the key factor for a better mixed matrix DLHFM performance. The best salt and MB rejection was found in those membranes prepared with (OMWCNT) followed by (PEI‐MWCNT) compared with neat PPSU membranes. An increase of 113% and 100% in Na2SO4 and MB rejection respectively was attained in DLHFM with 0.04 wt%, OMWCNT (relative to dope's weight) in comparison with the neat PPSU membrane. Antifouling test for bovine serum albumin (BSA) and MB showed better performance also for the mixed matrix DLHFM containing OMWCNT's. In antifouling tests, a 4.4% and 25% flux recovery increase for MB and BSA respectively was obtained in DLHFM with 0.04 wt% OMWCNT compared with the neat PPSU DLHFM.