Microcompounding of organoclay–ABS/PA6 blend‐based nanocomposites
Authors:
- 22 January 2008
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 29 (4) , 345-356
Abstract
In this study, acrylonitrile–butadiene–styrene (ABS) and polyamide‐6 (PA6) were blended in the presence of an olefin‐based compatibilizer and organoclays. The effects of ABS to PA6 ratio, clay content, and screw speed of the microcompounder were examined by performing morphological (i.e., XRD, SEM, and TEM) and tensile tests. The average aspect ratio of the clay platelets after processing was obtained by applying semiautomatic image analysis method. SEM analysis showed that addition of the compatibilizers to the ABS/PA6 blend system resulted in a decrease in diameter of dispersed phase when one of the phases was continuous. The addition of 5 wt% compatibilizer altered the dispersed morphology to cocontinuous morphology when the weight percentage of ABS was equal to that of PA6. The results of XRD analysis implied that clays were exfoliated in the presence of PA6. It was observed in TEM micrographs that clays were selectively dispersed in PA6 phase. Aspect ratio of the platelets increased as the PA6 content increased. Moduli of the nanocomposites were improved by enriching blend with PA6 and increasing screw speed. POLYM. COMPOS., 2008. © 2008 Society of Plastics EngineersKeywords
This publication has 44 references indexed in Scilit:
- Effect of processing conditions on morphology and mechanical properties of compatibilized polypropylene nanocompositesPolymer, 2005
- Review of melt-processed nanocomposites based on EVOH/organoclayJournal of Polymer Science Part B: Polymer Physics, 2005
- Effect of melt processing conditions on the extent of exfoliation in organoclay-based nanocompositesPolymer, 2001
- Nylon 6 nanocomposites by melt compoundingPolymer, 2001
- Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materialsMaterials Science and Engineering: R: Reports, 2000
- The chemistry of polymer-clay hybridsMaterials Science and Engineering: C, 1995
- Interaction of nylon 6‐clay surface and mechanical properties of nylon 6‐clay hybridJournal of Applied Polymer Science, 1995
- Synthesis of nylon 6-clay hybridJournal of Materials Research, 1993
- Physical properties of ABS/SMA/nylon-6 ternary blends: effect of blending sequencePolymer, 1993
- Polymer BlendsJournal of Macromolecular Science, Part C: Polymer Reviews, 1980