Three-Dimensional Method Combining Linearly Structured Light Sensing and Rotary Scanning for Measuring Aviation Bearings
- 19 April 2023
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-10
Abstract
The geometric parameters of aviation bearings need to be accurately measured to ensure that the bearings are correctly assembled for reliable operation and quality purposes. This study aimed to solve the problems presented by the low accuracy and low efficiency of the existing method while avoiding the error introduced by the deviation of the measurement beam from the center of the aviation bearings during measurement. This method determines the spatial posture of the axis of the rotary table using linear structured light sensing, and extracts the spatial point-cloud data of the aviation bearings based on rotary scanning. We propose algorithms for spatial property determination and point-cloud segmentation. To avoid the error caused by the deviation of the measurement beam from the center of the aviation bearings, the point-cloud data are transformed to a new coordinate system prior to extracting the features of the datum plane and raceway. An aviation bearing is measured to verify the validity of the proposed method. The radius and eccentricity of the raceway are 4.900 mm and 0.010 mm with experimental standard deviations of 0.002 mm and 0.001 mm, respectively. For comparison purposes, experiments with a coordinate measuring machine and contourgraph were also performed. The expanded measurement uncertainty considering the repeatability, reference instruments, and temperature drift is 1.6 μ m. The proposed method can be extended to precision noncontact measurements of workpieces with rotary structures.Keywords
Funding Information
- National Natural Science Foundation of China (51975158)
- Natural Science Foundation of Heilongjiang Province of China (LH2020E041)
- Fundamental Research Funds for the Central Universities (XNAUEA5750302321)
This publication has 21 references indexed in Scilit:
- An Adaptive Spectral Kurtosis Method and its Application to Fault Detection of Rolling Element BearingsIEEE Transactions on Instrumentation and Measurement, 2019
- Optical Inspection System for Gear Tooth Surfaces Using a Projection Moiré MethodSensors, 2019
- Point cloud filtering on UAV based point cloudMeasurement, 2019
- Novel Adaptive Search Method for Bearing Fault Frequency Using Stochastic Resonance Quantified by Amplitude-Domain IndexIEEE Transactions on Instrumentation and Measurement, 2019
- Uncertainty modeling of the spatial coordinate error correction system of the CMM based on laser tracer multi-station measurementMeasurement Science and Technology, 2019
- Minimum zone evaluation of roundness using hybrid global search approachThe International Journal of Advanced Manufacturing Technology, 2017
- A multi-time scale approach to remaining useful life prediction in rolling bearingMechanical Systems and Signal Processing, 2017
- Field Geometric Calibration Method for Line Structured Light Sensor Using Single Circular TargetScientific Programming, 2017
- Wheel-bearing fault diagnosis of trains using empirical wavelet transformMeasurement, 2016
- CMM uncertainty analysis with factorial designPrecision Engineering, 2003