Jiang Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jiang Liu has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Dongshan Lian
Center of Ultra-Precision Optoelectronic Instrument Engineering and the Key Laboratory of Ultra-Precision Intelligent Instrumentation Engineering, Harbin Institute of Technology, Harbin, China
2 shared publications - Jingzhi Huang
Center of Ultra-Precision Optoelectronic Instrument Engineering and the Key Laboratory of Ultra-Precision Intelligent Instrumentation Engineering, Harbin Institute of Technology, Harbin, China
2 shared publications - Jiubin Tan
Harbin Institute of Technology
2 shared publications - Runze Yang
Center of Ultra-Precision Optoelectronic Instrument Engineering and the Key Laboratory of Ultra-Precision Intelligent Instrumentation Engineering, Harbin Institute of Technology, Harbin, China
2 shared publications - Tonghan Lin
Center of Ultra-Precision Optoelectronic Instrument Engineering and the Key Laboratory of Ultra-Precision Intelligent Instrumentation Engineering, Harbin Institute of Technology, Harbin, China
1 shared publication - Yongmeng Liu
Center of Ultra-Precision Optoelectronic Instrument Engineering and the Key Laboratory of Ultra-Precision Intelligent Instrumentation Engineering, Harbin Institute of Technology, Harbin, China
1 shared publication
Latest Publications
- 30 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73 (00189456) , 1-10
Bidirectional Line-Structured Light Scanning Measurement Method for Maximum Thickness of Aero-Engine Blade Cross Sections Based on Profile Features
As a key component of aircraft engines, the complexity of blade features and the increasing production volumes pose significant challenges to the accuracy and efficiency of their profile inspections. In order to concurrently ensure accuracy and efficiency in measuring the maximum thickness of aero-engine blade cross-sections, this study presents a measurement method employing bi-directional line structured light scanning based on blade profile features. The designed bi-directional line structured light scanning system is tailored for measuring blade profile, enabling the simultaneous acquisition of coordinates for all points on both sides of the complete blade profile. A calibration method is introduced to determine the motion direction of the displacement stage within the Laser Scanning Sensor (LSS) coordinate system, as well as the relative position of the bidirectional LSS coordinate system. This method aims to integrate the coordinates of measurement data points acquired into the world coordinate system. Additionally, a feature-extracting algorithm, grounded in the inherent profile features of the blade, is proposed to accurately determine the maximum thickness of the blade cross-section. The effectiveness of the proposed method is verified through the measurement of an aero-engine blade. A comparison between the maximum blade thickness measured by the proposed method and the results obtained by the coordinate measuring machine reveals a maximum difference of 0.003 mm. The proposed method can be extended to other cross-sectional characteristic parameters on the contour of blades, contributing to the broader field of aero-engine design and manufacturing.
- 30 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73 (00189456) , 1-10
Bidirectional Line-Structured Light Scanning Measurement Method for Maximum Thickness of Aero-Engine Blade Cross Sections Based on Profile Features
As a key component of aircraft engines, the complexity of blade features and the increasing production volumes pose significant challenges to the accuracy and efficiency of their profile inspections. In order to concurrently ensure accuracy and efficiency in measuring the maximum thickness of aero-engine blade cross-sections, this study presents a measurement method employing bi-directional line structured light scanning based on blade profile features. The designed bi-directional line structured light scanning system is tailored for measuring blade profile, enabling the simultaneous acquisition of coordinates for all points on both sides of the complete blade profile. A calibration method is introduced to determine the motion direction of the displacement stage within the Laser Scanning Sensor (LSS) coordinate system, as well as the relative position of the bidirectional LSS coordinate system. This method aims to integrate the coordinates of measurement data points acquired into the world coordinate system. Additionally, a feature-extracting algorithm, grounded in the inherent profile features of the blade, is proposed to accurately determine the maximum thickness of the blade cross-section. The effectiveness of the proposed method is verified through the measurement of an aero-engine blade. A comparison between the maximum blade thickness measured by the proposed method and the results obtained by the coordinate measuring machine reveals a maximum difference of 0.003 mm. The proposed method can be extended to other cross-sectional characteristic parameters on the contour of blades, contributing to the broader field of aero-engine design and manufacturing.
- 19 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-10
Three-Dimensional Method Combining Linearly Structured Light Sensing and Rotary Scanning for Measuring Aviation Bearings
The geometric parameters of aviation bearings need to be accurately measured to ensure that the bearings are correctly assembled for reliable operation and quality purposes. This study aimed to solve the problems presented by the low accuracy and low efficiency of the existing method while avoiding the error introduced by the deviation of the measurement beam from the center of the aviation bearings during measurement. This method determines the spatial posture of the axis of the rotary table using linear structured light sensing, and extracts the spatial point-cloud data of the aviation bearings based on rotary scanning. We propose algorithms for spatial property determination and point-cloud segmentation. To avoid the error caused by the deviation of the measurement beam from the center of the aviation bearings, the point-cloud data are transformed to a new coordinate system prior to extracting the features of the datum plane and raceway. An aviation bearing is measured to verify the validity of the proposed method. The radius and eccentricity of the raceway are 4.900 mm and 0.010 mm with experimental standard deviations of 0.002 mm and 0.001 mm, respectively. For comparison purposes, experiments with a coordinate measuring machine and contourgraph were also performed. The expanded measurement uncertainty considering the repeatability, reference instruments, and temperature drift is 1.6 μ m. The proposed method can be extended to precision noncontact measurements of workpieces with rotary structures.
- 19 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-10
Three-Dimensional Method Combining Linearly Structured Light Sensing and Rotary Scanning for Measuring Aviation Bearings
The geometric parameters of aviation bearings need to be accurately measured to ensure that the bearings are correctly assembled for reliable operation and quality purposes. This study aimed to solve the problems presented by the low accuracy and low efficiency of the existing method while avoiding the error introduced by the deviation of the measurement beam from the center of the aviation bearings during measurement. This method determines the spatial posture of the axis of the rotary table using linear structured light sensing, and extracts the spatial point-cloud data of the aviation bearings based on rotary scanning. We propose algorithms for spatial property determination and point-cloud segmentation. To avoid the error caused by the deviation of the measurement beam from the center of the aviation bearings, the point-cloud data are transformed to a new coordinate system prior to extracting the features of the datum plane and raceway. An aviation bearing is measured to verify the validity of the proposed method. The radius and eccentricity of the raceway are 4.900 mm and 0.010 mm with experimental standard deviations of 0.002 mm and 0.001 mm, respectively. For comparison purposes, experiments with a coordinate measuring machine and contourgraph were also performed. The expanded measurement uncertainty considering the repeatability, reference instruments, and temperature drift is 1.6 μ m. The proposed method can be extended to precision noncontact measurements of workpieces with rotary structures.