Effect of Refined Spheroidizated Structure on Mechanical Properties of Spring Steel 51CrV4
Open Access
- 3 May 2023
- journal article
- research article
- Published by Jan Evangelista Purkyne University in Usti nad Labem in Manufacturing Technology
- Vol. 23 (1) , 40-46
Abstract
The steel 51CrV4 is widely used for the production of springs. Materials research into spring steels aims to meet the requirements of the industry, which mainly concern high yield and tensile strengths. Ductility has to be retained as the strength is increased. Also, the resistance against brittle fracture is important, measured as fracture toughness. Enhancement of the mentioned mechanical properties can be accomplished by structural refinement. One possible way to refine the final quenched and tempered structure is to refine the soft annealed structure before quenching. The article is devoted to Accelerated Carbide Spheroidization and Refinement (ASR) with a comparison to conventional soft annealing (SA) in the 51CrV4 spring steel. Both spheroidization treatments (ASR by induction heating, and SA by electric furnace heating) led to different carbide particle sizes. The carbide refinement alters the material's behavior during quenching. Finer carbides dissolve more rapidly during austenitization at the quenching temperature. It is possible to lower the quenching temperature thanks to carbide refinement. Mechanical properties after hardening with different quenching temperatures were positively affected too.Keywords
This publication has 18 references indexed in Scilit:
- Various Approaches to Accelerated Carbide Spheroidization of 54SiCr SteelKey Engineering Materials, 2015
- Effect of Heating Rate on Accelerated Carbide Spheroidisation (ASR) in 100CrMnSi6-4 Bearing SteelArchives of Metallurgy and Materials, 2014
- Fatigue behaviour of helical compression springs at a very high number of cycles – Investigation of various influencesInternational Journal of Fatigue, 2014
- The Effect of Heat and Surface Treatment on the Fatigue Behaviour of 56SiCr7 Spring SteelProcedia Engineering, 2014
- On the Spheroidized Carbide Dissolution and Elemental Partitioning in High Carbon Bearing Steel 100Cr6Metallurgical and Materials Transactions A, 2013
- Mechanism of accelerated spheroidization of steel during cyclic heat treatment around the upper critical temperaturePhilosophical Magazine Letters, 2013
- An Alternate Approach to Accelerated Spheroidization in Steel by Cyclic AnnealingJournal of Materials Engineering and Performance, 2010
- Coarsening behavior of cementite particles at a subcritical temperature in a medium carbon steelScripta Materialia, 1999
- Effect of Tempering Level on Mechanical Properties and Toughness of Spring SteelsMaterials Science Forum, 1994
- Mechanisms of Pearlite SpheroidizationMetallurgical Transactions A, 1987