JKJakub Kotous

Jakub Kotous

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jakub Kotous has a total of 39 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Impact of hot isostatic pressing on the microstructure of AISI 316L austenitic steel processed by laser direct energy deposition

    by David Bricín, Zdeněk Jansa, Denisa Janová, Zbyněk Špirit, Petr Beneš, Dana Kubátová, Jakub Kotous


  • Open Access

    Dilatometric Effects Accompanying Phase Transformations during Tempering of Spring Steels

    by Jakub Kotous, Zbyšek Nový, Petr Motyčka, Pavel Salvetr

    The tempering procedure of quenched 54SiCr6 spring steel was analyzed using continuous heating dilatometry, isothermal dilatometry, metallography, and hardness measurement. The dilatometry was performed on four different steel modifications wi...


  • Open Access

    Possibilities for Improvement of Mechanical Properties of High-Strength Medium-Carbon SiCr Steels

    by Pavel Salvetr, Jakub Kotous, Črtomir Donik, Aleksandr Gokhman, Zbyšek Nový


  • Open Access

    Kinetics of Austenite Decomposition in 54SiCr6 Steel during Continuous Slow Cooling Conditions

    by Aleksandr Gokhman, Petr Motyčka, Pavel Salvetr, Zbyšek Nový, Jakub Kotous, Arkadii Briukhanov, Ján Džugan

    In this study, dilatometry and metallography were used to investigate the effect of silicon and copper alloying on the decomposition kinetics of 54SiCr6 steel during continuous slow cooling. It is different from the published literature for using the approach of the local activation energy of the austenite decomposition Ef and the local Avrami exponent n of the volume fraction of the transformed phase f to study the kinetics of austenite-pearlitic transformation in cooled 54SiCr steel at slow cooling rates. The Johnson–Mehl–Avrami equation was used to determine the dependence of the local activation energy for austenite decomposition Ef and the local Avrami exponent n on the volume fraction of the transformed phase f. The mechanism of the austenite decomposition was analysed based on the calculated values of n. Both the local and average activation energies were used to evaluate the alloying effect, and the results were compared with those obtained from other methods. The type of microstructure formed as a result of cooling at rates of 0.5 K/s, 0.3 K/s, 0.1 K/s and 0.05 K/s was determined. The effects of changes in the cooling rate and the content of silicon (1.5–2.5 wt.%) and copper (0.12–1.47 wt.%) on the dimension of nucleation and growth kinetics of the transformed phase were studied. It was revealed that the pearlite microstructure was formed predominantly in 54SiCr6 steel as a result of continuous cooling at slow cooling rates. It was also found that alloying this steel with copper led to a significant decrease in the value of Ef, as well as to a change in the mechanism of the kinetics of the austenite-pearlite transformation, which was realised in predominantly two- and three-dimensional nucleation and growth at a constant nucleation rate. At the same time, alloying this steel with silicon led only to a slight change in Ef. The results of the study of 54SiCr steel presented the dependence of the activation energy of transformation and the local Avrami exponent on the volume fraction of the transformed phase at a given cooling rate at different copper and silicon contents. In addition, the study provides insight into the mechanism of kinetics in cooled 54SiCr steel as a function of the cooling rate.


  • Open Access

    Aspects of Austenitization for the Bearing Steel Induction Quenching Design

    by Daniela Nachazelova, Jaromir Dlouhy, Petr Motycka, Jakub Kotous

    The dissolution of carbides during the heating to the quenching temperature has a significant effect on the martensite oversaturation and the resulting mechanical properties. The kinetics of dissolution can be influenced by various external factors. This work deals with monitoring the carbide dissolution utilizing dilatometer analysis. The austenitization of 100CrMnSi6-4 bearing steel in two initial states was compared—after accelerated spheroidization annealing and conventional soft annealing. The main objective was to determine the amount of undissolved cementite during austenitization in the temperature range where only austenite and cementite are present in the structure. The austenitization temperature determines the degree of cementite dissolution and, consequently, the carbon content in austenite and thus the final properties after quenching. The cementite dissolution was quantified from dilatometric curves and image analysis.


  • Open Access

    Influence of Structural State prior Quenching in Spring Steel

    by Jakub Kotous, Pavel Salvetr, Daniela Nacházelová

    Various structure states before quenching significantly influence final mechanical properties as well as the dispersion of chemical composition at the same steel grade. Therefore heat treatment with mechanical properties is specified in the technical delivery conditions. Even if the heat treatment is determined, different mechanical properties can be achieved. These differences are increasing in importance in high-strength applications like springs, cutting tools, safety, and load-bearing parts of automotive design ect. Because it has a direct impact on their lifetime. The structure consists of ferrite and cementite after spheroidization annealing prior quenching process. The cementite could be observed in various shapes, e.g. fine and large globular particles or the rest of the disintegrated lamellar shape. This article shows how these cementite morphologies affect the quenching behavior and final mechanical properties in high-strength spring steel 54SiCr6.


  • Open Access

    Effect of Refined Spheroidizated Structure on Mechanical Properties of Spring Steel 51CrV4

    by Jakub Kotous, Daniela Nacházelová, Jaromír Dlouhý, Martin Rund

    The steel 51CrV4 is widely used for the production of springs. Materials research into spring steels aims to meet the requirements of the industry, which mainly concern high yield and tensile strengths. Ductility has to be retained as the strength is increased. Also, the resistance against brittle fracture is important, measured as fracture toughness. Enhancement of the mentioned mechanical properties can be accomplished by structural refinement. One possible way to refine the final quenched and tempered structure is to refine the soft annealed structure before quenching. The article is devoted to Accelerated Carbide Spheroidization and Refinement (ASR) with a comparison to conventional soft annealing (SA) in the 51CrV4 spring steel. Both spheroidization treatments (ASR by induction heating, and SA by electric furnace heating) led to different carbide particle sizes. The carbide refinement alters the material's behavior during quenching. Finer carbides dissolve more rapidly during austenitization at the quenching temperature. It is possible to lower the quenching temperature thanks to carbide refinement. Mechanical properties after hardening with different quenching temperatures were positively affected too.

  • Open Access

    Fatigue Properties of Spring Steels after Advanced Processing

    by Radek Procházka, Adam Stehlík, Jakub Kotous, Pavel Salvetr, Tomasz Bucki, Ondřej Stránský, Sanin Zulić

    This article deals with the effect of strain-assisted tempering (SAT) on the fatigue properties of 54SiCr6 steel used for spring steel wires in a wide variety of automotive applications, including coil springs. This steel spring wire is extremely strong, having a high elastic limit and yield point, giving the steel excellent energy accumulation and fatigue properties. This combination opens up new possibilities in helical and cylindrical coil spring design, resulting in the reduction of both size and weight. Lightweight coil springs lead to improvements in fuel consumption, stability and vehicle traction. A large plastic deformation and SAT were applied to enhance the yield point of the study material. Improvements in the static and cyclic properties of steel springs were investigated using tensile tests and 3PB fatigue tests at ambient temperature. In addition, an advanced laser shock peening (LSP) process was employed to increase the fatigue resistance of the SAT material. The results presented here show great improvements in the static and fatigue properties over commercial steel treatment. The material quality of the wires was evaluated to be insufficient for further processing with cold coiling.


  • Open Access

    Effect of Cu Alloying on Mechanical Properties of Medium-C Steel after Long-Time Tempering at 500 °C

    by Pavel Salvetr, Aleksandr Gokhman, Milan Svoboda, Črtomir Donik, Ivana Podstranská, Jakub Kotous, Zbyšek Nový

    This research studies the influence of the copper alloying of medium-carbon steel on mechanical properties after quenching and tempering at 500 °C. The microstructure was characterised using SEM, EBSD, TEM, and XRD analysis. The mechanical properties were comprehensively investigated using hardness measurements, tensile and Charpy impact tests and solid solution, grain boundary, dislocation, and precipitation strengthening contributions were estimated. Higher yield strength for Cu-alloyed steel was confirmed at about 35–73 MPa. The precipitation strengthening contribution from Cu precipitates in the range of 11–49 MPa was calculated. The interaction between Cu precipitates and dislocations retards the decrease in dislocation density. Similar values of effective grain size of martensite crystals were measured for Cu-alloyed and Cu-free steel as well. Copper alloyed steel exhibited significantly deteriorated impact toughness, total plastic elongation, and reduction of area. The size of Cu precipitates ranged from 8.3 nm after tempering at 500 °C for 6 h to 13.9 nm after tempering for 48 h.


  • Open Access

    Effect of Double-Step and Strain-Assisted Tempering on Properties of Medium-Carbon Steel

    by Pavel Salvetr, Andrea Školáková, Jakub Kotous, Jan Drahokoupil, Daniel Melzer, Zdeněk Jansa, Črtomir Donik, Aleksandr Gokhman, Zbyšek Nový

    The present work aimed to study the properties of medium-carbon steel during tempering treatment and to present the strength increase of medium-carbon spring steels by strain-assisted tempering (SAT). The effect of double-step tempering and double-step tempering with rotary swaging, also known as SAT, on the mechanical properties and microstructure was investigated. The main goal was to achieve a further enhancement of the strength of medium-carbon steels using SAT treatment. The microstructure consists of tempered martensite with transition carbides in both cases. The yield strength of the DT sample is 1656 MPa, while that of the SAT sample is about 400 MPa higher. On the contrary, plastic properties such as the elongation and reduction in area have lower values after SAT processing, about 3% and 7%, respectively, compared to the DT treatment. Grain boundary strengthening from low-angle grain boundaries can be attributed to the increase in strength. Based on X-ray diffraction analysis, a lower dislocation strengthening contribution was determined for the SAT sample compared to the double-step tempered sample.