Adsorption of Chromium (III) and Chromium (VI) Ions from Aqueous Solution Using Chitosan–Clay Composite Materials
Open Access
Abstract
In this work, biopolymer chitosan and natural clay were used to obtain composite materials. The overall aim of this study was to improve the properties (porosity, thermal stability and density) of pure chitosan beads by the addition of clay and to obtain a chitosan-based composite material for the adsorption of heavy metals from an aqueous solution, using Mongolian resources, and to study the adsorption mechanism. The natural clay was pre-treated with acid and heat to remove the impurities. The chitosan and pre-treated clay were mixed in different ratios (8:1, 8:2 and 8:3) for chemical processing to obtain a composite bead for the adsorption of chromium ions. The adsorption of Cr(III) and Cr(VI) was studied as a function of the solution pH, time, temperature, initial concentration of the chromium solution and mass of the composite bead. It was found that the composite bead obtained from the mixture of chitosan and treated clay with a mass ratio of 8:1 and 8:2 had the highest adsorption capacity (23.5 and 17.31 mg·g−1) for Cr(III) and Cr(VI), respectively, in the optimum conditions. The properties of the composite materials, prepared by mixing chitosan and clay with a ratio of 8:1 and 8:2, were investigated using XRD, SEM–EDS, BET and TG analysis. The adsorption mechanism was discussed based on the XPS analysis results. It was confirmed that the chromium ions were adsorbed in their original form, such as Cr(III) and Cr(VI), without undergoing oxidation or reduction reactions. Furthermore, Cr(III) and Cr(VI) were associated with the hydroxyl and amino groups of the composite beads during adsorption. The kinetic, thermodynamic and isothermal analysis of the adsorption process revealed that the interaction between the chitosan/clay composite bead and Cr(III) and Cr(VI) ions can be considered as a second-order endothermic reaction, as such the adsorption can be assessed using the Langmuir isotherm model. It was concluded that the composite bead could be used as an adsorbent for the removal of chromium ions.Keywords
Funding Information
- Mongolian University of Science and Technology (mfund-04/2022, J21C16)
- M-JEED (mfund-04/2022, J21C16)
This publication has 42 references indexed in Scilit:
- A comprehensive review on recent advances in preparation, physicochemical characterization, and bioengineering applications of biopolymersPolymer Bulletin, 2022
- Magnetic kaolinite immobilized chitosan beads for the removal of Pb(II) and Cd(II) ions from an aqueous environmentCarbohydrate Polymers, 2021
- Efficient removal of Pb(II), Cr(VI) and organic dyes by polydopamine modified chitosan aerogelsCarbohydrate Polymers, 2018
- Membrane properties in membrane distillation2018
- Novel thio-kaolinite nanohybrid materials and their application as heavy metal adsorbents in wastewaterApplied Clay Science, 2017
- Equilibrium, kinetic and thermodynamic studies on adsorption of cationic dyes from aqueous solutions using graphene oxideChemical Engineering Research and Design, 2017
- On the comparison of pseudo-first order and pseudo-second order rate laws in the modeling of adsorption kineticsChemical Engineering Journal, 2016
- Design of a new integrated chitosan-PAMAM dendrimer biosorbent for heavy metals removing and study of its adsorption kinetics and thermodynamicsBioresource Technology, 2016
- Kinetic modeling of liquid-phase adsorption of Congo red dye using guava leaf-based activated carbonApplied Water Science, 2016
- Adsorption of Cd(II), Cu(II) and Ni(II) ions by cross-linking chitosan/rectorite nano-hybrid composite microspheresCarbohydrate Polymers, 2015