Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Naoki Kano has a total of 98 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Development of Liquid Fertilizer Using Recovered Phosphorus from Sewage Sludge Ash and Application to Cultivation of Crop (Japanese Mustard Spinach)

    by Naoki Kano, Hikari Fukushima, Sayano Hiyoshi, Naoto Miyamoto, Norikuni Ohtake, Hee-Joon Kim

    リンは植物の成長に必要不可欠な栄養素であり,日本の農業においてはその全量を輸入に依存しているため,国内でのリン資源の確保が重要な課題となっている.本研究では,下水汚泥灰からリンを効率的に回収するとともに,回収したリンを利用して液体肥料を開発すること,さらに作製した液体肥料を用いて植物への施肥効果を検証することを目的とした.酸溶出法とアルカリ溶出法を組み合わせた二段階溶出法を用いることで,下水汚泥灰から高効率でリンを回収するとともに,重金属の除去も実現できた.また,回収された最終析出物は高純度のヒドロキシアパタイトを主成分としており,肥料成分として利用可能であった.さらに,作製された液体肥料を用いたコマツナの水耕栽培実験において,市販肥料と同等以上の成長促進効果が確認された.本技術は,国内におけるリン資源の持続的利用を促進し,廃棄物処理の問題解決にも貢献できるものであり,さらなる応用が期待される.

  • Open Access

    Removal of Cr(VI) from an Aqueous Solution via a Metal Organic Framework (Ce-MOF-808)

    by Hongfei Zhang, Ming Zou, Haixin Zhang, Naoto Miyamoto, Naoki Kano

    Hexavalent chromium (Cr(VI)) is a carcinogenic and highly mobile pollutant in aquatic environments. In this study, three cerium-based metal–organic frameworks (Ce-UiO-66, Ce-UiO-66-NO2, and Ce-MOF-808) were synthesized and evaluated for their ability to remove Cr(VI) from aqueous solutions. Among the frameworks studied, Ce-MOF-808 exhibited the highest adsorption capacity and was selected for detailed investigation. To elucidate its structure and adsorption behavior, Ce-MOF-808 was characterized using XRD, FT-IR, SEM-EDS, TG-DTA, XPS, and Zeta potential analyses. The zeta potential results showed that the adsorbent surface remained positively charged in the pH range of 2.8–8.6, enabling electrostatic attraction toward anionic chromate species. XPS further revealed valence transitions between Ce3+/Ce4+ and Cr(VI)/Cr(III), demonstrating the occurrence of partial redox transformation during adsorption. Batch experiments showed that the adsorption was strongly pH-dependent and favored acidic conditions (pH 2). The kinetics followed the pseudo-second-order model, whereas the isotherm data were better described by the Langmuir model, yielding a maximum adsorption capacity of 42.74 mg/g. Thermodynamic analysis indicated a spontaneous and exothermic process. Moreover, Ce-MOF-808 maintained high Cr(VI) uptake in real water samples, demonstrating its environmental applicability. Overall, Ce-MOF-808 is a promising redox-active adsorbent for efficient Cr(VI) removal in water treatment applications.


  • Open Access

    Removal of Sodium Dodecylbenzenesulfonate from Aqueous Solution Using Quaternary Ammonium-Modified Paper Fibers

    by Ming Zou, Hongfei Zhang, Haixin Zhang, Naoto Miyamoto, Naoki Kano

    This study explores the removal of the anionic surfactant sodium dodecylbenzenesulfonate (SDBS) from aqueous solution using paper fibers functionalized with quaternary ammonium groups. The paper fibers used in the adsorbent were derived from waste paper, and under alkaline conditions, the quaternary ammonium groups were grafted onto the hydroxyl groups on the cellulose 6 position via the Williamson reaction, thereby producing cationic cellulose. Through the characterization of modifier, we confirmed that the product was a dodecyl dimethyl quaternary ammonium salt. The successful modification of the paper fibers by a quaternary ammonium salt was confirmed by analyzing the structural characteristics of the fibers before and after modification. The modification rate was about 36.6%. The results of the adsorption experiment with SDBS solution showed that compared with unmodified paper fibers, the adsorption capacity of modified paper fibers for SDBS increased by about 8 times and the SDBS removal rate was 97.6%. The optimal adsorption conditions were pH 7, an adsorbent input of 0.3 g, and a shaking time of 6 h. It was determined that the adsorption process was more consistent with pseudo-second-order adsorption kinetics, and the Langmuir adsorption isotherm equation indicated that the adsorption process was monolayer adsorption, with a maximum capacity reaching 90.9 mg/g. Finally, thermodynamic analysis showed that adsorption occurred spontaneously and exothermically.


  • Open Access

    Modified Urtica dioica Leaves as a Low-Cost and Effective Adsorbent for the Simultaneous Removal of Pb(II), Cu(II), Cd(II), and Zn(II) from Aqueous Solution

    by Enkhtuul Mendsaikhan, Munkhpurev Bat-Amgalan, Ganchimeg Yunden, Naoto Miyamoto, Naoki Kano, Hee Joon Kim

    This study investigates the simultaneous adsorption of Pb(II), Cu(II), Cd(II), and Zn(II) ions from aqueous solutions using Urtica dioica leaves (UDLs) modified with sulfuric acid, followed by heat treatment to enhance adsorptive properties. The heat treatment significantly increased the adsorbent’s specific surface area to 451.93 m2·g−1. Batch adsorption experiments were performed to determine the influence of the contact time, pH of the aqueous solution, adsorbent dosage, temperature, and initial metal concentration on the adsorption efficiency. The material (modified UDLs) was characterized using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM), and X-ray photoelectron spectroscopy (XPS). Maximum removal efficiencies were determined as 99.2%, 96.4%, 88.7%, and 83.6% for Pb(II), Cu(II), Cd(II), and Zn(II) ions, respectively. Adsorption isotherms and kinetics revealed that the process follows the Langmuir equation and pseudo-second-order models, indicating monolayer adsorption and chemisorption mechanisms. Furthermore, thermodynamic analysis indicated that the adsorption processes are spontaneous and endothermic in nature. The influence of competing ions on the adsorption of multiple heavy metals was also discussed. The results suggest that sulfuric acid and heat-treated Urtica dioica leaves can offer a promising, low-cost, and eco-friendly adsorbent for removing heavy metal ions from contaminated water.


  • Open Access

    Fabrication and Properties of Adsorptive Ceramic Membrane Made from Kaolin with Addition of Dolomite for Removal of Metal Ions in a Multielement Aqueous System

    by Munkhpurev Bat-Amgalan, Naoki Kano, Naoto Miyamoto, Hee-Joon Kim, Ganchimeg Yunden

    The exorbitant presence of heavy metals has emerged as one of the most serious ecological issues facing the world. The treatment processes currently employed are not effective for removing all of the contaminants completely. Therefore, it is necessary for better operational technology to be developed. Here, we fabricated effective and inexpensive kaolin-based ceramic membranes with the addition of dolomite using a simple dry compaction method. Moreover, we applied the obtained adsorptive membranes to the removal of lead, copper, zinc, and cadmium from aqueous solutions. The membranes prepared with dolomite addition (sintered at different temperatures) exhibited a high water flux between 246.78 and 1738.56 L/h·m2 at an extremely low operating pressure (0.03 MPa). Furthermore, the optimal membrane showed high removal efficiencies of 99.12, 99.82, 85.62, and 65.94% for Pb(II), Cu(II), Zn(II), and Cd(II), respectively. The utilization of dolomite enhanced the removal efficiency of the adsorptive membranes by around 32-54% in a multielement system. This work reveals that enhanced adsorptive membranes with high fluxes and strong removal abilities have great potential as a synergized system with practical applications in the removal of heavy-metal contaminants from wastewater in the future.


  • Open Access

    Adsorption of Chromium (III) and Chromium (VI) Ions from Aqueous Solution Using Chitosan–Clay Composite Materials

    by Enkhtuya Majigsuren, Ulziidelger Byambasuren, Munkhpurev Bat-Amgalan, Enkhtuul Mendsaikhan, Naoki Kano, Hee Joon Kim, Ganchimeg Yunden

    In this work, biopolymer chitosan and natural clay were used to obtain composite materials. The overall aim of this study was to improve the properties (porosity, thermal stability and density) of pure chitosan beads by the addition of clay and to obtain a chitosan-based composite material for the adsorption of heavy metals from an aqueous solution, using Mongolian resources, and to study the adsorption mechanism. The natural clay was pre-treated with acid and heat to remove the impurities. The chitosan and pre-treated clay were mixed in different ratios (8:1, 8:2 and 8:3) for chemical processing to obtain a composite bead for the adsorption of chromium ions. The adsorption of Cr(III) and Cr(VI) was studied as a function of the solution pH, time, temperature, initial concentration of the chromium solution and mass of the composite bead. It was found that the composite bead obtained from the mixture of chitosan and treated clay with a mass ratio of 8:1 and 8:2 had the highest adsorption capacity (23.5 and 17.31 mg·g−1) for Cr(III) and Cr(VI), respectively, in the optimum conditions. The properties of the composite materials, prepared by mixing chitosan and clay with a ratio of 8:1 and 8:2, were investigated using XRD, SEM–EDS, BET and TG analysis. The adsorption mechanism was discussed based on the XPS analysis results. It was confirmed that the chromium ions were adsorbed in their original form, such as Cr(III) and Cr(VI), without undergoing oxidation or reduction reactions. Furthermore, Cr(III) and Cr(VI) were associated with the hydroxyl and amino groups of the composite beads during adsorption. The kinetic, thermodynamic and isothermal analysis of the adsorption process revealed that the interaction between the chitosan/clay composite bead and Cr(III) and Cr(VI) ions can be considered as a second-order endothermic reaction, as such the adsorption can be assessed using the Langmuir isotherm model. It was concluded that the composite bead could be used as an adsorbent for the removal of chromium ions.


  • Open Access

    Synthesis of hydroxyapatite nanoparticles using dolomite powder

    by Zoltuya Khashbaatar, Akama Shota, Narantsetseg Magsarjav, Naoki Kano, Hee-Joon Kim

  • Open Access

    A Study of the Recovery of Phosphorus from Aqueous Solutions Using Zr-Doped MgMn-Layered Double Hydroxide (MgMnZr-LDH)

    by Haixin Zhang, Ayako Chōnan, Ming Zou, Munkhpurev Bat-Amgalan, Naoto Miyamoto, Naoki Kano, Shuang Zhang

    A new type of adsorbent, Zr-doped three metal element adsorbent MgMnZr-LDH(3), was synthesized using Mg(NO3)2·6H2O, Mn(NO3)2·6H2O, and ZrCl2O·8H2O and employed to adsorb phosphate ions from an aqueous solution. The materials were characterized using X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), an X-ray diffractometer (XRD), thermogravimetric–differential thermal analysis (TG−DTA), Fourier-transform infrared spectroscopy (FT-IR), and nitrogen adsorption/desorption experiments (N2 Brunauer–Emmett–Teller (BET)). The influences of the contact time (0~48 h), pH value (3, 5, 7, and 9), initial concentration (0~50 μg/dm3), and temperature (15, 25, 35, and 45 °C) on the adsorption of phosphate (P) ions were studied to investigate P adsorption from wastewater. The results showed that the Zr-modified three metal element adsorbent MgMnZr-LDH(3) had a superior adsorption effect on phosphate anions, which was about 2.18 times greater than that of the two metal element adsorbent MgMn-LDH(3). The MgMnZr-LDH(3) adsorption process conformed to the pseudo-second-order model. The adsorption isotherm can generally be described more satisfactorily for P using the Langmuir isotherm, and the maximum adsorption capacity of P was shown to be 30.8 mg/g. Under optimum experimental conditions (contact time: 24 h; pH 8; and temperature: 25 °C), the effect of competing anions (Cl−, SO42−, and NO3−) on the adsorption of phosphate ions was also investigated, and only the phosphate ions showed high selectivity. The good adsorption performance of MgMnZr-LDH(3) towards phosphate (P) ions was attributed to the anion exchange and complex reaction.


  • Open Access

    A Natural Zeolite Developed with 3-Aminopropyltriethoxysilane and Adsorption of Cu(II) from Aqueous Media

    by Nasanjargal Shirendev, Munkhpurev Bat-Amgalan, Naoki Kano, Hee-Joon Kim, Burmaa Gunchin, Batdemberel Ganbat, Ganchimeg Yunden

    In this work, we removed copper (II) from an aqueous solution by using zeolite modified with a silicon-organic monomer (3-aminopropyltriethoxysilane; APTES) depending on the pH, time, temperature, and initial concentration of Cu(II) ions. To confirm the modification process and assess the interaction between the modified zeolite and Cu(II), we performed instrumental analyses (XRD, SEM/EDX, TGA/DTA, BET, FT-IR, and XPS). We determined the maximum adsorption capacities of the modified zeolite for Cu(II) to be 4.50, 6.244, 6.96, and 20.66 mg/g at T = 25 °C (pH = 5, t = 8 h) when the initial concentrations of Cu(II) were 50, 100, 200, and 400 mg/L, respectively. According to the adsorption thermodynamics and kinetics, the second-order reaction controls the adsorption process. Based on the two isotherm models (Langmuir and Freundlich) with constant values (KL = 0.144, n = 2.764) and the correlation coefficients (R2 = 0.8946, R2 = 0.9216), we concluded that the Cu(II) adsorption onto the modified zeolite could be followed by the Freundlich isotherm model rather than the Langmuir isotherm model. The modified zeolite could be an effective material for the removal of Cu(II) from aqueous solutions.


  • Open Access

    Preparation and Characterization of Low-Cost Ceramic Membrane Coated with Chitosan: Application to the Ultrafine Filtration of Cr(VI)

    by Munkhpurev Bat-Amgalan, Naoto Miyamoto, Naoki Kano, Ganchimeg Yunden, Hee-Joon Kim

    In this work, low-cost ceramic membranes (CMs) were prepared from ultrafine starting powders such as kaolin, clay, and starch by a dry compaction method. The ceramic membranes were sintered at different temperatures and times and were characterized by XRD, XRF, TG-DTA, SEM-EDS, N2-BET, water absorption, compressive strength, and pure water flux. The optimal membrane, sintered at 1000 °C for 3 h, possessed water absorption of 27.27%, a compressive strength of 31.05 MPa, and pure water flux of 20.74 L/h m2. Furthermore, chitosan crosslinked with glutaraldehyde was coated on the surface of the ceramic membrane by the dip coating method, and the pore size of the chitosan-coated ceramic membrane (CCCM) was 16.24 nm. Eventually, the separation performance of this membrane was assessed for the removal of chromium(VI) from aqueous solution. The ultrafine filtration of Cr(VI) was studied in the pH range of 2–7. The maximum removal of Cr(VI) was observed to be 71.25% with a pH of 3. The prepared CCCM showed good membrane properties such as mechanical stability and ultrafine structure, which have important applications for the treatment of wastewater including such heavy metals.