Investigation of the Sensitivity of Acoustic Emission to the Differentiation Between Mode I, II, and III Fracture in Bulk Polymer Materials
Open Access
Abstract
There is very limited research in the literature investigating the way acoustic emission signals change when polymer materials are undergoing different fracture modes. This study investigates the capability of acoustic emission to recognize the fracture mode through acoustic emission parameter analysis, and can be considered the first-ever study which examines the impact of different loading conditions, i.e., fracture mode I, mode II, and mode III, on the acoustic emission parameters in polymer materials. To accomplish this, prism-like pre-cracked polymer specimens were tested under the three different fracture modes. Acoustic emission parameters appeared sensitive to the different loading conditions of the pre-cracked specimens, indicating that acoustic emission can be used to distinguish the three fracture modes in polymer materials. Both frequency and time parameters reflect changes in the stress states at the crack tip. The duration and rise time of the waveforms were found to be the most sensitive acoustic emission parameters for identifying the fracture mode, while the average frequency variation can be employed to differentiate between in-plane and out-of-plane fracture modes. In order to interpret the experimental results in relation to wave mechanics, numerical wave propagation simulations for longitudinal and shear excitations were performed to simulate tensile and shear fracture modes and the corresponding emitted waves. An interesting correlation between the experimental and numerical results exists, showcasing acoustic emission’s potential for fracture identification.Keywords
Funding Information
- Research Foundation—Flanders (FWO Vlaanderen) (G031020N)
This publication has 48 references indexed in Scilit:
- Damage Localization, Identification and Evolution Studies during Quasi-Static Indentation of CFRP Composite Using Acoustic EmissionPolymers, 2023
- Acoustic Emission Source Location Using Finite Element Generated Delta-T MappingSensors, 2022
- Acoustic Emission Testing2022
- Acoustic Emission-Based Study to Characterize the Crack Initiation Point of Wood Fiber/HDPE CompositesPolymers, 2019
- Analysis of Acoustic Emission Propagation in Metal-to-Metal Adhesively Bonded JointsJournal of Nondestructive Evaluation, 2018
- Transverse Crack Detection in 3D Angle Interlock Glass Fibre Composites Using Acoustic EmissionMaterials, 2016
- Strength Evaluation of Stomatologic Polymers by Wavelet Transform of Acoustic Emission SignalsStrength of Materials, 2015
- Acoustic source localizationUltrasonics, 2014
- Analysis of acoustic emissions from polymersPolymer, 1983
- An acoustic emission energy analysis and its use to study damage in laminated compositesJournal of Nondestructive Evaluation, 1980