A Three-Phase Synergetically Controlled Buck–Boost Current DC-Link EV Charger
- 1 August 2023
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 38 (12) , 15184-15198
Abstract
With the ever-increasing share of electric vehicles (EVs) comes a need for highly efficient and compact EV chargers. EV charger modules should provide a wide-output-voltage range (200–1000 V) to ensure compatibility with various EV battery voltages. Thus, buck–boost functionality is needed, which can advantageously be realized by a current DC-link topology; a buck-type current-source rectifier (CSR)-stage and a downstream three-level boost-type DC/DC-stage share the main magnetic component (the DC-link inductor). Furthermore, the two stages can operate collaboratively; for low output voltages, the CSR-stage controls the output voltage and the DC/DC-stage is clamped to avoid switching losses; for high output voltages, the DC/DC-stage shapes the DC-link current such that the CSR-stage operates with 2/3-PWM (switching limited to two out of the three phases) and, hence, with reduced switching losses. This article, thus, introduces a simplified synergetic control concept that ensures this loss-optimum operation of the two-stage system for any output voltage. A compact 10-kW hardware demonstrator with a power density of 6.4 kW/dm 3 (107.5 W/in 3 ) is then used to verify the control concept and the seamless transitions between operating modes. For the first time, a system-level experimental demonstration of the loss savings achieved by 2/3-PWM is provided, and the precompliance conducted EMI test results meet CISPR 11 Class A. Moreover, a detailed experimental characterization of losses/efficiency over the full range of output voltage and power confirms the loss models and the design procedure presented earlier. Finally, the demonstrator shows quite a flat efficiency characteristic (higher than 98% for most operating points with output voltages above $400 \,\mathrm{V}$ and more than 25% of rated load) with a peak efficiency of 98.8% at 520 V output voltage and 5 kW. All in all, the presented current DC-link buck–boost PFC rectifier system features a promising solution for future isolated or nonisolated EV charger modules.Keywords
This publication has 50 references indexed in Scilit:
- Behavioral Characterization of Electric Vehicle Charging Loads in a Distribution Power Grid Through Modeling of Battery ChargersIEEE Transactions on Industry Applications, 2015
- A novel three-phase current source rectifier with delta-type input connection to reduce the device conduction lossIEEE Transactions on Power Electronics, 2015
- Virtual-Impedance-Based Control for Voltage-Source and Current-Source ConvertersIEEE Transactions on Power Electronics, 2014
- A Novel Control Concept for Reliable Operation of a Three-Phase Three-Switch Buck-Type Unity-Power-Factor Rectifier With Integrated Boost Output Stage Under Heavily Unbalanced Mains ConditionIEEE Transactions on Industrial Electronics, 2005
- Semiconductor losses in voltage source and current source IGBT converters based on analytical derivation2005
- Analysis of the duality of three phase PWM converters with DC voltage link and DC current link2003
- Safe control of four-quadrant switches2003
- Optimal vector modulation of a PWM current source converter according to minimal switching losses2002
- A vector controlled current-source PWM rectifier with a novel current damping methodIEEE Transactions on Power Electronics, 2000
- A three-phase soft-switched high-power-density DC/DC converter for high-power applicationsIEEE Transactions on Industry Applications, 1991