A novel three-dimensional SCR motion simulator for modelling the catenary riser–seabed interaction in a centrifuge
- 1 June 2024
- journal article
- research article
- Published by Canadian Science Publishing in Canadian Geotechnical Journal
- Vol. 61 (6) , 1266-1274
Abstract
Steel catenary risers (SCRs) provide a cost-effective solution for deepwater oil and gas production. However, SCRs are susceptible to potential fatigue failure due to the cyclic motions of floating platforms. Previous studies on the physical modelling of cyclic SCR–seabed interactions have primarily focused on either the continuous cyclic motion of an SCR or a single rest period between two SCR motion packets. However, our understanding of the development of seabed trenches and excess pore pressure and their effects on SCR fatigue during multiple episodes of SCR motion and soil reconsolidation remains limited. This study presents a newly developed model container capable of modelling three-dimensional SCR motions including heave, surge, sway, and vortex-induced vibration in a geotechnical centrifuge. A centrifuge test is conducted to investigate the vertical cyclic SCR–seabed interaction, considering five vertical cyclic motion packets with intervening periods of reconsolidation. The results indicate that ignoring the effects of reconsolidation leads to an overestimation of the fatigue life of an SCR. In this test, the SCR fatigue life is reduced by 18%–23% after five episodic SCR motion packets and intervening reconsolidation.Keywords
Funding Information
- Research Grants Council, University Grants Committee (GRF 16210420)
This publication has 11 references indexed in Scilit:
- Investigation of trench effect on fatigue response of steel catenary risers using an effective stress analysisComputers and Geotechnics, 2023
- Experimental measurement of monotonic and cyclic lateral resistance of risers and pipelines in Gulf of Mexico claysCanadian Geotechnical Journal, 2020
- The evolution of seabed stiffness during cyclic movement in a riser touchdown zone on soft clayGéotechnique, 2017
- Assessment of the consolidated breakout response of partially embedded subsea pipelinesGéotechnique, 2014
- Interaction between catenary riser and soft seabed: Large-scale indoor testsApplied Ocean Research, 2014
- Centrifuge modeling of steel catenary risers at touchdown zone part I: Development of novel centrifuge experimental apparatusOcean Engineering, 2013
- Centrifuge modeling of steel catenary risers at touchdown zone part II: Assessment of centrifuge test results using kaolin clayOcean Engineering, 2013
- Analysis of Soil Strength Degradation during Episodes of Cyclic Loading, Illustrated by the T-Bar Penetration TestInternational Journal of Geomechanics, 2010
- The interpretation of in situ soil testsGéotechnique, 1984
- Observational Procedure of Settlement PredictionSoils and Foundations, 1978