Epoxy Resin/Recycled Sand Mortars’ Resistance to Chloride Ions Diffusion
- 17 September 2015
- conference paper
- Published by American Society of Civil Engineers (ASCE)
- p. 843-852
Abstract
This work aims to study the possibility of using recycled sand to prepare an epoxy resin mortar mechanically resistant and resistant against chloride ions diffusion. Comparative studies were performed on standardized hydraulic mortar and epoxy / standardized sand. The effect of the incorporation of a thinner, methyl octanoate, on the workability, mechanical properties and durability of the epoxy resin mortar is analyzed. It appears from this study that investigated mortars have a workability which is improved with the increase in the percentage of resin and with the addition of thinner. The total substitution of standardized sand by recycled sand alters this property. The resin mortar have a lower porosity than the hydraulic mortar, better mechanical properties and better resistance to chloride ions diffusion regardless of sand nature. The total substitution of standardized sand by recycled sand does not significantly affect the mechanical properties of resin mortars having the same binder percentages (20%). However, it causes a slight decrease in the resistance to chloride ions diffusion attributed to a higher total porosity accessible to water for recycled sand mortar. Similarly, the migration of these ions into mortar decreases with increasing the resin percentage, decrease attributed to the lowering of total porosity. Thinner addition affects the apparent diffusion coefficient.Keywords
This publication has 10 references indexed in Scilit:
- Mechanical and physical properties of epoxy polymer concrete after exposure to temperatures up to 250°CConstruction and Building Materials, 2012
- Optimization of the formulation of micro-polymer concretesConstruction and Building Materials, 2011
- Effect of styrene–butadiene rubber latex on the chloride permeability and microstructure of Portland cement mortarConstruction and Building Materials, 2009
- Properties of polymer-modified mortars using epoxy and acrylic emulsionsConstruction and Building Materials, 2007
- Experimental study on properties of polymer-modified cement mortars with silica fumeCement and Concrete Research, 2002
- Relationship between pore structure and permeability of hardened cement mortars: On the choice of effective pore structure parameterCement and Concrete Research, 1997
- Compatibility of concrete repair materials and systemsConstruction and Building Materials, 1996
- Waterproofing of portland cement mortars with a specially designed polyacrylic latexCement and Concrete Research, 1995
- Pore size distribution and oxygen diffusion resistance of polymer-modified mortarsCement and Concrete Research, 1991
- Significance of property mismatch in the patch repair of structural concrete Part 1: Properties of repair systemsMagazine of Concrete Research, 1990