Structure and functional properties of rapidly quenched TiNiCu alloys with high copper contents
Authors:
Open Access
- 1 January 2021
- conference paper
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1758 (1) , 012036
Abstract
Thin materials exhibiting the shape memory effect, with a narrow temperature hysteresis, are required to create miniature and high-speed devices. Quasi-binary intermetallic TiNi-TiCu alloys with high copper contents (more than 10 at %) demonstrate the reversible martensitic transformation with a small (4-6 K) hysteresis. Alloys of the TiNi–TiCu system with a copper content of 30–40 at.% were fabricated in an amorphous state by the planar flow casting technique at a melt cooling rate of 106K/s in the form of ribbons 30–50 μm thick. The alloy samples were subjected to dynamic crystallization using a single electric current pulse with duration of 5 ms. X-ray diffraction studies revealed almost fully martensitic state of the alloys with B19 structure at room temperature. TEM examination showed their structure to contain typical B19-martensite plates with a mean size of 20–80 nm. At the same time, the alloys exhibit a one-stage phase martensitic transformation B2↔B19 in the temperature range of (55÷75)°C, as well as pronounced shape memory effect, whose properties are largely determined by the structural parameters of the alloys.Keywords
This publication has 10 references indexed in Scilit:
- Specifics of Crystallization of Amorphous TiNiCu Alloys with High Concentrations of CopperPhysics of the Solid State, 2020
- Two-Way Shape Memory Effect in Rapidly-Quenched High-Copper TiNiCu Alloys Deformed in the Martensitic StateRussian Metallurgy (Metally), 2020
- SMA Foils for MEMS: From Material Properties to the Engineering of MicrodevicesShape Memory and Superelasticity, 2017
- The effect of copper on structure of TiNiCu melt-spun ribbonsMaterials Today: Proceedings, 2017
- A review of shape memory alloy research, applications and opportunitiesMaterials & Design (1980-2015), 2014
- Fabrication and characterization of amorphous–crystalline TiNiCu melt-spun ribbonsJournal of Alloys and Compounds, 2013
- Properties and applications of TiNiCu shape-memory-alloy thin filmsJournal of Alloys and Compounds, 2013
- Stimulus-responsive shape memory materials: A reviewMaterials & Design (1980-2015), 2012
- Nanostructured thin ribbons of a shape memory TiNiCu alloyThin Solid Films, 2011
- Physical metallurgy of Ti–Ni-based shape memory alloysProgress in Materials Science, 2005