Dynamic Modulus Predictive Models for In-Service Asphalt Layers in Hot Climate Areas
Authors:
- 1 February 2021
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 33 (2) , 04020438
Abstract
Dynamic modulus of asphalt mixtures is one of the most important input parameters in design and rehabilitation of asphalt pavements. Dynamic modulus predictive models are alternative methods for laboratory determination of this parameter. These models were developed based on laboratory data. Due to sophisticated and laborious laboratory testing methods, there is a need to develop new models to determine dynamic moduli of in-service asphalt layers. In this study, nine different asphalt pavement sites were selected in two southern provinces of Iran. Falling weight deflectometer (FWD) testing was performed at each site and core samples were taken from the asphalt layers for volumetric analysis. Using the results, dynamic moduli of asphalt layers were determined using six predictive models, including Witczak, modified Witczak, Hirsch, Al-Khateeb, global, and simplified global models. Predicted dynamic moduli were compared with those determined from back-calculation analysis of FWD data. Existing predictive models were calibrated and new models were developed for the prediction of in situ dynamic modulus of asphalt layers in hot climate areas. Performance evaluation and validation of the new models showed high prediction accuracy and low prediction bias with very good correlations between the predicted and back-calculated values ( ).
Keywords
This publication has 22 references indexed in Scilit:
- Calibration of dynamic modulus predictive modelConstruction and Building Materials, 2016
- Improved Hirsch model for estimating the modulus of hot-mix asphaltRoad Materials and Pavement Design, 2015
- A simplified approach for the estimation of HMA dynamic modulus for in service pavements2015
- Predicted E* dynamic moduli of the Arizona mixes using asphalt binders placed over a 25-year periodConstruction and Building Materials, 2014
- Performance of MEPDG Dynamic Modulus Predictive Models for Asphalt Concrete Mixtures: Local Calibration for IdahoJournal of Materials in Civil Engineering, 2012
- Semiempirical, Analytical, and Computational Predictions of Dynamic Modulus of Asphalt Concrete MixturesTransportation Research Record: Journal of the Transportation Research Board, 2010
- Accuracy of Predictive Models for Dynamic Modulus of Hot-Mix AsphaltJournal of Materials in Civil Engineering, 2009
- Advanced approaches to hot-mix asphalt dynamic modulus predictionCanadian Journal of Civil Engineering, 2008
- Micromechanical finite element framework for predicting viscoelastic properties of asphalt mixturesMaterials and Structures, 2007
- Effect of Frequency-dependent Asphalt Concrete Layer Moduli on Pavement Response2000