Effect of heat and steam bending on the longitudinal and radial mechanical properties and derived acoustical indices of spruce and maple wood
Open Access
- 22 July 2026
- journal article
- Published by Walter de Gruyter GmbH in Holzforschung
Abstract
This study investigates the effects of steam and heat bending on the longitudinal and radial vibro-mechanical properties of spruce ( Picea abies ) and maple ( Acer spp. ). More than 100 thin beams were bent to nominal strain levels of approximately 0.7 % and compared to reference specimens using laser vibrometry and modal analysis combined with finite element model updating. X-ray microtomography (2 μm voxel size) was performed on selected specimens to examine the cellular-scale integrity after bending. After re-conditioning at 50 % RH and 25 °C, density showed no statistically significant change. A modest reduction in longitudinal stiffness was observed, more pronounced in spruce, while the longitudinal loss factor increased significantly for both species, leading to decreased radiation ratio and acoustic conversion efficiency indices, particularly in spruce. These results provide quantitative trends relevant to manufacturing of bent wood, the mechanical and vibroacoustical design of bent wood parts and structures.Keywords
This publication has 29 references indexed in Scilit:
- Effects of steaming treatment on the technological properties of olive woodEuropean Journal of Wood and Wood Products, 2026
- Hygro-mechanical long-term behaviour of spruce, pine and lime wood: parameter identification and model validationWood Science and Technology, 2024
- Exploring Modal Analysis for Characterizing Impact of Making Process on the Properties of Woods Used in Musical Instruments2024
- Life Cycle Assessment of Wood Waste2023
- The effect of bending parameters on mechanical properties of bent oak woodEuropean Journal of Wood and Wood Products, 2017
- Engineering Materials and Their Properties2012
- Vibration Testing for the Evaluation of the Effects of Moisture Content on the In-Plane Elastic Constants of Wood Used in Musical Instruments2011
- The influence of cell geometry on the elasticity of softwoodJournal of Materials Science, 1994
- Directional viscoelastic properties of wood1988
- Relaxation behaviour of the amorphous components of woodJournal of Materials Science, 1987