A study on intermediate buffer layer of coated Fiber Bragg Grating cryogenic temperature sensors
Authors:
Open Access
- 18 December 2015
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 101 (1) , 012154
Abstract
The sensor characteristics of a coated Fiber Bragg grating (FBG) thermal sensor for cryogenic temperatures depends mainly on the coating materials. The sensitivity of the coated FBG can be improved by enhancing the effective thermal strain transfer between the different layers and the bare FBG. The dual coated FBG's has a primary layer and the secondary layer. The primary coating acts as an intermediate buffer between the secondary coating and the bare FBG. The outer secondary coating is normally made of metals with high thermal expansion coefficient. In this work, a detailed study is carried out on chromium and titanium intermediate buffer layers with various coating thicknesses and combinations. To improve the sensitivity, the secondary coating layer was tested with Indium, Lead and Tin. The sensors were then calibrated in a cryogenic temperature calibration facility at Institute of Technical Physics (ITEP), Karlsruhe Institute of Technology. The sensors were subjected to several thermal cycles between 4.2 and 80 K to study the sensor performance and its thermal characteristics. The sensor exhibits a Bragg wavelength shift of 13pm at 20K. The commercially available detection equipment with a resolution of 1pm can result in a temperature resolution of 0.076 K at 20K.Keywords
This publication has 14 references indexed in Scilit:
- Design, fabrication, and testing of fiber Bragg grating sensors for cryogenic long-range displacement measurementCryogenics, 2015
- Fiber Bragg Grating Sensors for Distributed Torsional Strain Measurements in a (RE) BCO TapeIEEE Sensors Journal, 2014
- Fiber Bragg Grating Sensors for Strain Measurement at Multiple Points in an NbTi Superconducting Sample CoilIEEE Sensors Journal, 2014
- Fiber Bragg Grating-Based Temperature Distribution Evaluation of Multilayer Insulations Between 300 K–77 KIEEE Sensors Journal, 2010
- FIBER BRAGG GRATING SENSORS FOR LOCALIZED STRAIN MEASUREMENTS AT LOW TEMPERATURE AND IN HIGH MAGNETIC FIELDAIP Conference Proceedings, 2010
- Fibre Bragg grating temperature sensors for harsh nuclear environments2003
- Displacement measurements in the cryogenically cooled dipoles of the new CERN-LHC particle accelerator2001
- Fiber Bragg grating technology fundamentals and overviewJournal of Lightwave Technology, 1997
- Strain gauges for superconducting magnet testingCryogenics, 1980
- Photosensitivity in optical fiber waveguides: Application to reflection filter fabricationApplied Physics Letters, 1978