The Effects of Vertebral Body Tethering on the Intervertebral Discs and Facet Joints: A Numerical Analysis
Open Access
- 11 August 2025
- journal article
- Published by Wiley in International Journal for Numerical Methods in Biomedical Engineering
- Vol. 41 (8) , e70084
Abstract
Anterior vertebral body tethering (VBT) is a promising technique for the treatment of adolescent idiopathic scoliosis. However, the segments directly treated with VBT can experience substantial loads resulting from the tether pretension, which may alter internal stresses and potentially compromise structures such as the intervertebral discs (IVDs) and facet joints. We aim to investigate the effects of tether within the VBT on the L1–L2 IVD stresses and contact forces of the facet joints, using an extensively calibrated and validated finite element model of the T10–S1 spine. The implant was inserted on the left side of the T10–L3 and tensioned up to 300 N representing the tether pretension applied during surgery and the case of the postoperative neutral position. Subsequently, the spine was tested under an external pure moment of 8 Nm. The tether pretension resulted in a significant increase in the IVD stresses. In the neutral position, a gradual increase in intervertebral pressure (IDP) at the center of the IVD of 0.094, 0.181, and 0.267 MPa was observed after applying forces of 100, 200, and 300 N to the tether, respectively. The contact force of the left facet joint also increased with pretension. It was 12.5 N for the native spine and gradually increased to 49.5, 82.0, and 100.9 N for tether pretensions of 100, 200, and 300 N, respectively, during extension. These results indicate that tether pretension is a key parameter that increases the internal stresses of the IVD and the contact forces of the facet joints at the implant side.Keywords
This publication has 71 references indexed in Scilit:
- The Effect of Scoliosis Fusion on Spinal Motion: A Comparison of Fused and Nonfused Patients With Idiopathic ScoliosisSpine, 2006
- Accuracy and repeatability of a new method for measuring facet loads in the lumbar spineJournal of Biomechanics, 2006
- Mechanical Conditions That Accelerate Intervertebral Disc Degeneration: Overload Versus ImmobilizationSpine, 2004
- Adjacent segment motion after a simulated lumbar fusion in different sagittal alignments: a biomechanical analysis.2003
- Mechanobiology of the intervertebral discBiochemical Society Transactions, 2002
- Mechanical effects on skeletal growth.2002
- Effect of removing the nucleus pulposus on the deformation of the annulus fibrosus during compression of the intervertebral discJournal of Biomechanics, 2000
- In Vivo Intradiscal Pressure Measurement in Healthy Individuals and in Patients With Ongoing Back ProblemsSpine, 1999
- Change of Disc Height, Radial Disc Bulge, and Intradiscal Pressure From Discectomy An in Vitro Investigation on Human Lumbar DiscsSpine, 1991
- Hierarchical Structure of the Intervertebral DiscConnective Tissue Research, 1989