Heat release analysis for rapid compression machines: Challenges and opportunities
Authors:
- S. Scott GoldsboroughSGS. Scott Goldsborough
- Jeffrey SantnerJSJeffrey Santner
- Dongil KangDKDongil Kang
- Aleksandr FridlyandAFAleksandr Fridlyand
- Toby RockstrohTRToby Rockstroh
- Mads C. JespersenMJMads C. Jespersen
- 1 January 2019
- journal article
- research article
- Published by Elsevier in Proceedings of the Combustion Institute
- Vol. 37 (1) , 603-611
Abstract
No abstract availableKeywords
Funding Information
- Innovationsfonden
- Office of Energy Efficiency and Renewable Energy
- Argonne National Laboratory
- Savannah River Operations Office, U.S. Department of Energy
- University of Chicago
This publication has 29 references indexed in Scilit:
- Advances in rapid compression machine studies of low- and intermediate-temperature autoignition phenomenaProgress in Energy and Combustion Science, 2017
- Role of hydroxyl production and heat release in the two-zone fuel-rich adiabatic dimethyl ether/air flames at atmospheric pressureCombustion Theory and Modelling, 2017
- Application of a multi-zone model for the prediction of species concentrations in rapid compression machine experimentsCombustion and Flame, 2016
- Heat release rate variations in a globally stoichiometric, stratified iso-octane/air turbulent V-flameCombustion and Flame, 2015
- Heat release rate markers for premixed combustionCombustion and Flame, 2014
- A computationally efficient, physics-based model for simulating heat loss during compression and the delay period in RCM experimentsCombustion and Flame, 2012
- A reduced chemical kinetic model for HCCI combustion of primary reference fuels in a rapid compression machineCombustion and Flame, 2003
- Two-stage ignition in HCCI combustion and HCCI control by fuels and additivesCombustion and Flame, 2003
- A study of the combustion and emission characteristics of compressed-natural-gas direct-injection stratified combustion using a rapid-compression-machineCombustion and Flame, 2002
- Hydrogen autoignition at pressures above the second explosion limit (0.6-4.0 MPa)International Journal of Chemical Kinetics, 1998