The Influence of Furfuryl Resin Type—Classical and Designed for Sand 3D Printing—On Cast Iron Casting Microstructure and Surface Roughness
Open Access
Abstract
Resin-based binders are one of the main materials used in foundry molding and core sands. Self-curing sand with furfuryl resin is one of the most popular technologies in the production of molds and cores for complex, critical castings made of iron and non-ferrous alloys. It has dominated small-batch production and the production of large-sized castings. This work is part of the research on new molding sands for mold additive manufacturing (3D printing). Three-dimensional printing technology in the production of sand-casting molds and cores is finding increasing industrial application in the production of castings from non-ferrous metal alloys. The aim of the research presented in this paper was to determine the influence of furfuryl resin type (classical and designed for 3D printing of sand molds) on cast iron casting properties. The pouring parameters were elaborated on the basis of the MAGMA software. Microscopic observations of castings, produced in classical and 3D-printed molds, were conducted, as well as an assessment of the roughness of the samples. The gas emissions from molding sands with both types of furfuryl resin were tested and analyzed in the context of the roughness of the castings obtained. It was proven that molding sand with furfuryl resin designed for 3D printing was characterized by lower gas emissions, which, in the case of molding sands with organic binders, is beneficial from an environmental point of view.Keywords
Funding Information
- European Commission (101159771)
- AGH Research Project (16.16.170.654/507)
This publication has 20 references indexed in Scilit:
- Use of Sintered Bauxite Sand in Binder Jetting of Casting CoresInternational Journal of Metalcasting, 2025
- Case Studies Experience in Using 3D Sand Printing to Produce Molds for New and Replacement Cast ComponentsInternational Journal of Metalcasting, 2024
- Evaluation of additive manufacturing of sand cores in terms of the resulting surface roughnessHeliyon, 2022
- Binder jetting 3D printing process optimization for rapid casting of green parts with high tensile strengthChina Foundry, 2021
- Assessment of the effect of 3D printed sand mold thickness on solidification process of AlSi13 casting alloyThe International Journal of Advanced Manufacturing Technology, 2021
- Case Studies on Integrating 3D Sand-Printing Technology into the Production Portfolio of a Sand-Casting FoundryInternational Journal of Metalcasting, 2019
- A comparative study of fabrication of sand casting mold using additive manufacturing and conventional processThe International Journal of Advanced Manufacturing Technology, 2018
- Insulation effect of air cavity in sand mold using 3D printing technologyChina Foundry, 2018
- Advancements in Materials for Three-Dimensional Printing of Molds and CoresInternational Journal of Metalcasting, 2016
- Quantifying the Role of Part Design Complexity in Using 3D Sand Printing for Molds and CoresInternational Journal of Metalcasting, 2016