Dawid Halejcio
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Dawid Halejcio has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Katarzyna Major-Gabryś
AGH University of Krakow, Faculty of Foundry Engineering, Department of Moulding Materials, Mould Technology and Non-ferrous Metals, al. A. Mickiewicza 30, 30-059 Krakow, Poland
4 shared publications - Andrzej Fijołek
AGH Univestity of Krakow
1 shared publication - G. GolęBa1 shared publication
- Jan Marosz
Faculty of Foundry Engineering, AGH University of Krakow, Krakow, Poland
1 shared publication - Jarosław Jakubski
AGH University of Krakow
1 shared publication - Marcin Górny
AGH University of Krakow
1 shared publication
Latest Publications
- Open Access
- 25 June 2026
- Published by Polish Academy of Sciences Chancellery in Archives of Foundry Engineering
The Influence of Foundry Sand Type on the Hardening Process of Self-Setting Molding Sands Based on Urea-Furan Binder
The article presents the results of investigations on the influence of the type of sand matrix on the binding process of self-setting molding sands with an organic binder. The study encompassed molding sands prepared on matrices of quartz, reclaimed quartz, zircon, chromite, corundum, synthetic, and olivine sand (a “non-compatible” sand). For the preparation of the molding sands, a urea–furan resin Kalthartz U404 was used as the binder, along with an acidic hardener, Activator 100 T3. In the case of matrices compatible with the self-setting molding sand system with an organic binder, the resin content was 1.00 p.p.w., with a constant hardener-to-binder ratio of 50 %. During the study, a sieve analysis of the investigated sand matrices was conducted according to PN-83/H-11076, and the pH value was determined using a method refined by the authors based on BN-81/4021-02. Fourier Transform Infrared (FTIR) spectroscopy was performed, along with kinetic studies of the sand binding process using the ultrasonic method, complemented by observations of the resulting binder bridges. During the ultrasonic tests, the influence of the applied sand matrix on the value of the obtained wave velocities (CL) and on the changes in the degree of sand hardening (Sx) during binding was determined. Additionally, the kinetics of the hardening process were determined based on dCL/dt and dSx/dt. All experiments were conducted on an ultrasonic testing station equipped with a temperature-controlled chamber, maintaining an ambient temperature of 20 °C throughout the measurements. Care was taken to ensure that the temperature of the molding sand after mixing all components remained at approximately 20 ± 1 °C.
- 25 June 2026
- Published by Polish Academy of Sciences Chancellery in Archives of Foundry Engineering
Open AccessThe Influence of Foundry Sand Type on the Hardening Process of Self-Setting Molding Sands Based on Urea-Furan Binder
The article presents the results of investigations on the influence of the type of sand matrix on the binding process of self-setting molding sands with an organic binder. The study encompassed molding sands prepared on matrices of quartz, reclaimed quartz, zircon, chromite, corundum, synthetic, and olivine sand (a “non-compatible” sand). For the preparation of the molding sands, a urea–furan resin Kalthartz U404 was used as the binder, along with an acidic hardener, Activator 100 T3. In the case of matrices compatible with the self-setting molding sand system with an organic binder, the resin content was 1.00 p.p.w., with a constant hardener-to-binder ratio of 50 %. During the study, a sieve analysis of the investigated sand matrices was conducted according to PN-83/H-11076, and the pH value was determined using a method refined by the authors based on BN-81/4021-02. Fourier Transform Infrared (FTIR) spectroscopy was performed, along with kinetic studies of the sand binding process using the ultrasonic method, complemented by observations of the resulting binder bridges. During the ultrasonic tests, the influence of the applied sand matrix on the value of the obtained wave velocities (CL) and on the changes in the degree of sand hardening (Sx) during binding was determined. Additionally, the kinetics of the hardening process were determined based on dCL/dt and dSx/dt. All experiments were conducted on an ultrasonic testing station equipped with a temperature-controlled chamber, maintaining an ambient temperature of 20 °C throughout the measurements. Care was taken to ensure that the temperature of the molding sand after mixing all components remained at approximately 20 ± 1 °C.
- 30 December 2025
- Published by Polish Academy of Sciences Chancellery in Archives of Foundry Engineering
- p. 81-90
Selection of Chemically Cured Molding Sands’ with Inorganic Binders Dedicated to 3D Sand Printing
Due to the high technological potential, 3D printing technologies in the foundry industry are developing very dynamically. Binder jetting technology is most commonly used for the production of sand molds and cores with 3D printing. The binding materials used in foundry practice are organic resins modified with furfuryl alcohol. These materials are characterized by excellent technological properties, but at the same time, they are harmful to the environment. Environmentally friendly inorganic binders are an alternative to the organic binders used for the production of molds and cores, and this is the subject of research carried out at various research centers. This work determines the influence of molding sands’ with different inorganic binders composition on their chosen properties. The molding sands with 3 commercial inorganic binders used in traditional mold and core production technologies were tested as well as the molding sands dedicated to 3D printing with binders based on them. Four types of hardeners were used for chemical curing. The technological (strength, permeability, abrasion) and thermophysical (thermal deformation) tests carried out on molding sands and the physicochemical tests on binders (viscosity, wettability of the quartz substrate) have shown that inorganic binders elaborated on the basis of commercial binders can be used in 3D printing technology. The selected sands’ compositions were chosen for further research.
- 30 December 2025
- Published by Polish Academy of Sciences Chancellery in Archives of Foundry Engineering
- p. 81-90
Selection of Chemically Cured Molding Sands’ with Inorganic Binders Dedicated to 3D Sand Printing
Due to the high technological potential, 3D printing technologies in the foundry industry are developing very dynamically. Binder jetting technology is most commonly used for the production of sand molds and cores with 3D printing. The binding materials used in foundry practice are organic resins modified with furfuryl alcohol. These materials are characterized by excellent technological properties, but at the same time, they are harmful to the environment. Environmentally friendly inorganic binders are an alternative to the organic binders used for the production of molds and cores, and this is the subject of research carried out at various research centers. This work determines the influence of molding sands’ with different inorganic binders composition on their chosen properties. The molding sands with 3 commercial inorganic binders used in traditional mold and core production technologies were tested as well as the molding sands dedicated to 3D printing with binders based on them. Four types of hardeners were used for chemical curing. The technological (strength, permeability, abrasion) and thermophysical (thermal deformation) tests carried out on molding sands and the physicochemical tests on binders (viscosity, wettability of the quartz substrate) have shown that inorganic binders elaborated on the basis of commercial binders can be used in 3D printing technology. The selected sands’ compositions were chosen for further research.
- Open Access
The Influence of Furfuryl Resin Type—Classical and Designed for Sand 3D Printing—On Cast Iron Casting Microstructure and Surface Roughness
Resin-based binders are one of the main materials used in foundry molding and core sands. Self-curing sand with furfuryl resin is one of the most popular technologies in the production of molds and cores for complex, critical castings made of iron and non-ferrous alloys. It has dominated small-batch production and the production of large-sized castings. This work is part of the research on new molding sands for mold additive manufacturing (3D printing). Three-dimensional printing technology in the production of sand-casting molds and cores is finding increasing industrial application in the production of castings from non-ferrous metal alloys. The aim of the research presented in this paper was to determine the influence of furfuryl resin type (classical and designed for 3D printing of sand molds) on cast iron casting properties. The pouring parameters were elaborated on the basis of the MAGMA software. Microscopic observations of castings, produced in classical and 3D-printed molds, were conducted, as well as an assessment of the roughness of the samples. The gas emissions from molding sands with both types of furfuryl resin were tested and analyzed in the context of the roughness of the castings obtained. It was proven that molding sand with furfuryl resin designed for 3D printing was characterized by lower gas emissions, which, in the case of molding sands with organic binders, is beneficial from an environmental point of view.
Open AccessThe Influence of Furfuryl Resin Type—Classical and Designed for Sand 3D Printing—On Cast Iron Casting Microstructure and Surface Roughness
Resin-based binders are one of the main materials used in foundry molding and core sands. Self-curing sand with furfuryl resin is one of the most popular technologies in the production of molds and cores for complex, critical castings made of iron and non-ferrous alloys. It has dominated small-batch production and the production of large-sized castings. This work is part of the research on new molding sands for mold additive manufacturing (3D printing). Three-dimensional printing technology in the production of sand-casting molds and cores is finding increasing industrial application in the production of castings from non-ferrous metal alloys. The aim of the research presented in this paper was to determine the influence of furfuryl resin type (classical and designed for 3D printing of sand molds) on cast iron casting properties. The pouring parameters were elaborated on the basis of the MAGMA software. Microscopic observations of castings, produced in classical and 3D-printed molds, were conducted, as well as an assessment of the roughness of the samples. The gas emissions from molding sands with both types of furfuryl resin were tested and analyzed in the context of the roughness of the castings obtained. It was proven that molding sand with furfuryl resin designed for 3D printing was characterized by lower gas emissions, which, in the case of molding sands with organic binders, is beneficial from an environmental point of view.
- 24 June 2025
- Published by Polish Academy of Sciences Chancellery in Archives of Foundry Engineering
- p. 89-93
Improving the Knock-Out Properties of Moulding Sands with an Inorganic Binder
Moulding sands with an inorganic binder are mainly used in non-ferrous metal casting employed in the automotive industry. The disqualifying factor for their use in iron alloy casting is their high final strength, associated with further solidification of the water glass as the temperature rises. The subject addressed in this study aims to improve the knockout properties of moulding sands with water glass. In this case, a foundry sand additive of geological origin was used. This additive is a reclaimed waste from the construction industry. The moulding sand was made with a binder, which was water glass R145 (3.5 parts by weight), and as a hardener, Flodur 1 was used in a ratio of 5% to the binder and additionally, 2 and 3 parts by weight of an additive with grain sizes of 0.2mm, 0.16mm, and 0.10mm were used. Research was conducted on the impact of strength on bending and stretching, as well as permeability. Subsequently, a test was carried out in accordance with the Polish standard PN-85/H11005 by pouring the mould with liquid metal. It was demonstrated that the investigated additive does not have a negative impact on bending strength and permeability values and reduces the amount of work required to remove the core from the cast iron casting.
- 24 June 2025
- Published by Polish Academy of Sciences Chancellery in Archives of Foundry Engineering
- p. 89-93
Improving the Knock-Out Properties of Moulding Sands with an Inorganic Binder
Moulding sands with an inorganic binder are mainly used in non-ferrous metal casting employed in the automotive industry. The disqualifying factor for their use in iron alloy casting is their high final strength, associated with further solidification of the water glass as the temperature rises. The subject addressed in this study aims to improve the knockout properties of moulding sands with water glass. In this case, a foundry sand additive of geological origin was used. This additive is a reclaimed waste from the construction industry. The moulding sand was made with a binder, which was water glass R145 (3.5 parts by weight), and as a hardener, Flodur 1 was used in a ratio of 5% to the binder and additionally, 2 and 3 parts by weight of an additive with grain sizes of 0.2mm, 0.16mm, and 0.10mm were used. Research was conducted on the impact of strength on bending and stretching, as well as permeability. Subsequently, a test was carried out in accordance with the Polish standard PN-85/H11005 by pouring the mould with liquid metal. It was demonstrated that the investigated additive does not have a negative impact on bending strength and permeability values and reduces the amount of work required to remove the core from the cast iron casting.
- 23 December 2024
- Published by Polish Academy of Sciences Chancellery in Archives of Foundry Engineering
- p. 49-55
The Comparison of Chosen - Bonded with the Use of Classical and Dedicated for 3D Printing Furfuryl Binder - Molding Sands’ Properties as a Basis for Development a New Inorganic System
Binder jetting technology (3D printing) in the production of foundry molds and cores is becoming more and more industrially used due to ensuring very good quality of the casting surface. In 3D printing technology as the matrix, quartz sand is mainly used, with a grain size of 0.14-0.25 mm. The binder is an organic binder - most often furfuryl resins. As part of this work, self-hardening molding sands with furfuryl resins dedicated to the classic production of molds and cores, as well as molding sands with resin dedicated to 3D printing, were tested. The aim of the research was to compare the viscosity of binders and the properties of molding sands prepared based on binding systems both dedicated to the classic production of molds and cores and for 3D printing. Tests were carried out on the binding kinetics, bench life, strength properties, permeability, abrasion and hot distortion of molding sands prepared on the basis of a standard medium grain matrix and sieved fine-grain matrix. The carried-out tests have shown that the binding system based on furfuryl resin elaborated for 3D printing of molding sands provides strength properties of the sands similar to the classic system of binding self-hardening molding sands with furfuryl resins. However, it ensures faster binding speed and greater thermal stability measured by the hot distortion parameter. The use of a fine-grained matrix results in a decrease in the strength properties of all the molding sands. On the basis of the results achieved for molding sands with organic binding system, a new inorganic binding system was elaborated.
- 23 December 2024
- Published by Polish Academy of Sciences Chancellery in Archives of Foundry Engineering
- p. 49-55
The Comparison of Chosen - Bonded with the Use of Classical and Dedicated for 3D Printing Furfuryl Binder - Molding Sands’ Properties as a Basis for Development a New Inorganic System
Binder jetting technology (3D printing) in the production of foundry molds and cores is becoming more and more industrially used due to ensuring very good quality of the casting surface. In 3D printing technology as the matrix, quartz sand is mainly used, with a grain size of 0.14-0.25 mm. The binder is an organic binder - most often furfuryl resins. As part of this work, self-hardening molding sands with furfuryl resins dedicated to the classic production of molds and cores, as well as molding sands with resin dedicated to 3D printing, were tested. The aim of the research was to compare the viscosity of binders and the properties of molding sands prepared based on binding systems both dedicated to the classic production of molds and cores and for 3D printing. Tests were carried out on the binding kinetics, bench life, strength properties, permeability, abrasion and hot distortion of molding sands prepared on the basis of a standard medium grain matrix and sieved fine-grain matrix. The carried-out tests have shown that the binding system based on furfuryl resin elaborated for 3D printing of molding sands provides strength properties of the sands similar to the classic system of binding self-hardening molding sands with furfuryl resins. However, it ensures faster binding speed and greater thermal stability measured by the hot distortion parameter. The use of a fine-grained matrix results in a decrease in the strength properties of all the molding sands. On the basis of the results achieved for molding sands with organic binding system, a new inorganic binding system was elaborated.
- 1 March 2024
- Published by Polish Academy of Sciences Chancellery in Archives of Foundry Engineering
- Vol. 24 (1) , 32-39
The Use of 3D Printed Sand Molds and Cores in the Castings Production
- 1 March 2024
- Published by Polish Academy of Sciences Chancellery in Archives of Foundry Engineering
- Vol. 24 (1) , 32-39
The Use of 3D Printed Sand Molds and Cores in the Castings Production