Experimental Aerodynamic Analysis of a 4.6%-Scale Flying-V Subsonic Transport
Authors:
- 5 January 2020
- conference paper
- Published by American Institute of Aeronautics and Astronautics (AIAA)
Abstract
The experimental investigation into the aerodynamic characteristics of a 4.6%-scale half-model of a flying-wing transport aircraft is detailed. The study is performed in an open-jet wind tunnel where forces and moments are recorded using a 6-axis balance. Two control surfaces in the outboard wing are deflected to measure their effect in terms of lift, drag, and pitching moment up to a Reynolds number of 1 million. The results are subsequently combined with the estimated thrust force using a flight mechanics model of the aircraft in order to predict the most forward and most aft center-of-gravity locations for which the aircraft can be balanced with the control surfaces, while still being statically stable. The results show that the aircraft can attain an untrimmed maximum lift coefficient of 1.02 at an angle of attack of 35 degrees. Furthermore, the pitching moment around the leading-edge of the mean geometric chord is negatively correlated to the angle of attack up to 19 degrees, after which a strong pitch-break is observed, making the aircraft statically unstable. This is associated with a forward shift of the aerodynamic center to a longitudinal position 35% of the mean geometric chord (MGC) ahead of the moment reference point which is caused by the formation of strong vortices over the wing surface. The effectiveness of the control surfaces hardly deteriorates with angle of attack and all three control surfaces are shown to be effective up to the maximum lift coefficient. Analysis shows that the center-of-gravity location should reside between [-7.5; 0.5] %MGC, in power-off conditions, and between [-6; 1] %MGC, in power-on conditions, from the leading edge of the mean geometric chord to ensure an ultimate static stability margin of 4.4% as well and a minimum landing speed of 20 m/s. Within these ranges, trimmed maximum lift coefficient values of 0.68 and 0.66 can be achieved respectively in power-off and power-on conditions.Keywords
This publication has 11 references indexed in Scilit:
- Conceptual Design and Evaluation of Blended-Wing Body Aircraft2018
- Semi-span wind tunnel testing without conventional penicheExperiments in Fluids, 2017
- Aerodynamic Design of a Flying V Aircraft2017
- Turbulent mixing in wind turbine and actuator disc wakes: experiments and POD analysis2015
- Conceptual design of a medium size flying wingProceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 2007
- Design of the Blended Wing Body Subsonic TransportJournal of Aircraft, 2004
- Flying wing—problems and decisionsAircraft Design, 2001
- Numerical/experimental study of a wingtip vortex in the near fieldAIAA Journal, 1995
- A one-equation turbulence model for aerodynamic flows1992
- Outline of a Theory of Statistical Estimation Based on the Classical Theory of ProbabilityPhilosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences, 1937