Microstructure and Fatigue Properties of Resistance Element Welded Joints of DP500 Steel and AW 5754 H22 Aluminum Alloy
Open Access
Abstract
The modern concept of lightweight design (LW) requires the application of different materials in one structure (multi-material structures). The structure of different materials has a good perspective for application in the automotive and aerospace industries but only if it is possible to achieve a quality joint between different materials. The most used technology for joining different materials in the automotive industry is Resistance spot welding (RSW). Due to different mechanical, physical, and chemical properties, the joining of different materials by RSW technology does not provide a quality joint, and accordingly, alternative technologies for joining different materials have emerged. Resistance element welding (REW) was developed to enable joint of different materials. This paper presents the welding of AW 5754 H22 Al alloy (1.0 mm-thick) and DP500 steel (1.5 mm-thick) using novel REW. The peak load, absorption energy, microstructure, microhardness and fatigue strength of the REW joint has been investigated. The joint of the same materials has been done also using conventional RSW to compare some results. The results that will be presented in this paper show that that REW can achieve reliable joining of the two materials at relatively low welding currents compared to RSW. Using REW process with a significantly lower welding current, satisfactory mechanical characteristics of the weld joint can be achieved, so peak load is between 2300–2500 N, displacement is between 2.5–3 mm and the absorption energy is between 3.3–5.7 J. REW joints showed fatigue strength with the fatigue limit of 882 N.Keywords
This publication has 33 references indexed in Scilit:
- Role of zinc layer in resistance spot welding of aluminium to steelMaterials & Design, 2016
- Fatigue behaviour of Al/steel dissimilar resistance spot welds fabricated using Al–Mg interlayerScience and Technology of Welding and Joining, 2016
- Resistance Element Welding of 6061 Aluminum Alloy to Uncoated 22MnMoB Boron SteelMaterials and Manufacturing Processes, 2016
- Joining steel to aluminum alloy by resistance spot welding with a rivetInternational Journal of Materials Research, 2015
- Resistance spot welding macro characteristics of the dissimilar thickness dual phase steelsMaterials & Design (1980-2015), 2014
- The mechanical properties of dissimilar resistance spot-welded DP600–DP1000 steel joints for automotive applicationsProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2014
- Aceros avanzados de alta resistencia en la industria automovilísticaRevista de Metalurgia, 2012
- Dissimilar resistance spot welding of DP600 dual phase and AISI 1008 low carbon steels: correlation between weld microstructure and mechanical propertiesIronmaking & Steelmaking: Processes, Products and Applications, 2011
- Investigation on Joint Strength of Dissimilar Resistance Spot Welds of Aluminum Alloy and Low Carbon SteelAdvanced Materials Research, 2011
- Manufacturing and mechanical properties of thermoplastic hybrid laminates based on DP500 steelComposites Part A: Applied Science and Manufacturing, 2009