Zijah Burzić
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zijah Burzić has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
- Simon Sedmak
Innovation Centre of the Faculty of Mechanical Engineering, Belgrade, Serbia
4 shared publications - Aleksandar Sedmak
University of Belgrade, Faculty of Mechanical Engineering, Belgrade, Serbia
3 shared publications - Danica Simić
Military Technical Institute, Ratka Resanovića 1, 11030 Belgrade, Serbia
2 shared publications - Ivica Čamagić
Faculty of Technical sciences, Kneza Milosa 7, 38220 Kosovska Mitrovica, Serbia
2 shared publications Meri Burzić
2 shared publications- Milivoje Jovanović
Academy of Applied Studies, Dositeja Obradovića nn, 38218 Leposavić, Serbia
2 shared publications
Latest Publications
- Open Access
- 16 May 2025
- Published by International University of Travnik in Travnik in Zbornik radova
- Vol. 14 (1) , 431-442
KARAKTERISTIKE PONAŠANJA NAJNOVIJE GENERACIJE HROM MOLIBDEN ČELIKA GRUPE SA 387 Gr. 91 PRI OBLIKOVANJU PROIZVODA POSTUPCIMA ZAVARIVANJA I ODRŽIVI RAZVOJ / CHARACTERISTICS OF THE BEHAVIOR OF THE LATEST GENERATION CHROMIUM MOLYBDENUM STEEL GROUP SA 387 Gr. 91 IN PRODUCT SHAPING BY WELDING PROCESSES AND SUSTAINABLE DEVELOPMENT
Chromium-molybdenum steel group SA 387 Gr. 91 is the latest from the generation of steels designed to operate under high temperature, elevated pressure, and corrosive environments. The most important characteristics of this steel, compared to previously used steels for high-temperature applications, are its high yield strength, good corrosion resistance, significant oxidation resistance, and excellent creep resistance. The latter property enables engineers to design components with significantly thinner walls compared to other types of steels (material savings). In addition to its good mechanical properties at elevated temperatures, weldability is also important for this steel and, in general, for the entire group of such steels. It is crucial that welding does not affect their resistance to corrosion, creep, or their overall mechanical properties, thus extending the remaining lifespan of the structure, which, together with material savings, fits into the concept of sustainable development. This paper will present the characteristics of the behavior of Cr-Mo steels during welding, based on experimental testing (macro and microstructural examination of the welded joint, technological tests – bend testing, hardness testing).
- 16 May 2025
- Published by International University of Travnik in Travnik in Zbornik radova
- Vol. 14 (1) , 431-442
Open AccessKARAKTERISTIKE PONAŠANJA NAJNOVIJE GENERACIJE HROM MOLIBDEN ČELIKA GRUPE SA 387 Gr. 91 PRI OBLIKOVANJU PROIZVODA POSTUPCIMA ZAVARIVANJA I ODRŽIVI RAZVOJ / CHARACTERISTICS OF THE BEHAVIOR OF THE LATEST GENERATION CHROMIUM MOLYBDENUM STEEL GROUP SA 387 Gr. 91 IN PRODUCT SHAPING BY WELDING PROCESSES AND SUSTAINABLE DEVELOPMENT
Chromium-molybdenum steel group SA 387 Gr. 91 is the latest from the generation of steels designed to operate under high temperature, elevated pressure, and corrosive environments. The most important characteristics of this steel, compared to previously used steels for high-temperature applications, are its high yield strength, good corrosion resistance, significant oxidation resistance, and excellent creep resistance. The latter property enables engineers to design components with significantly thinner walls compared to other types of steels (material savings). In addition to its good mechanical properties at elevated temperatures, weldability is also important for this steel and, in general, for the entire group of such steels. It is crucial that welding does not affect their resistance to corrosion, creep, or their overall mechanical properties, thus extending the remaining lifespan of the structure, which, together with material savings, fits into the concept of sustainable development. This paper will present the characteristics of the behavior of Cr-Mo steels during welding, based on experimental testing (macro and microstructural examination of the welded joint, technological tests – bend testing, hardness testing).
- Open Access
Fracture and Fatigue Crack Growth Behaviour of A516 Gr 60 Steel Welded Joints
The facture and fatigue behaviour of welded joints made of A516 Gr 60 was analysed, bearing in mind their susceptibility to cracking, especially in the case of components which had been in service for a long time period. With respect to fracture, the fracture toughness was determined for all three zones of a welded joint, the base metal (BM), heat-affected zone (HAZ) and weld metal (WM), by applying a standard procedure to evaluate KIc via based on JIc values (ASTM E1820). With respect to fatigue, the fatigue crack growth rates were determined according to the Paris law by the standard procedure (ASTM E647) to evaluate the behaviour of different welded joint zones under amplitude loading. The results obtained for A516 Gr. 60 structural steel showed why it is widely used in the case of static loads, since the minimum value of fracture toughness (185 MPa√m) provides relatively large critical crack lengths, whereas its behaviour under amplitude loading indicated a need for further improvement in WM and HAZ, since the crack growth rate reached values as high as 4.58 × 10−4 mm/cycle. In addition, risk-based analysis was applied to assess the structural integrity of a pressure vessel, including comparison with the high-strength low-alloy (HSLA) steel NIOVAL 50, proving once again its superior behaviour under static loading.
Open AccessFracture and Fatigue Crack Growth Behaviour of A516 Gr 60 Steel Welded Joints
The facture and fatigue behaviour of welded joints made of A516 Gr 60 was analysed, bearing in mind their susceptibility to cracking, especially in the case of components which had been in service for a long time period. With respect to fracture, the fracture toughness was determined for all three zones of a welded joint, the base metal (BM), heat-affected zone (HAZ) and weld metal (WM), by applying a standard procedure to evaluate KIc via based on JIc values (ASTM E1820). With respect to fatigue, the fatigue crack growth rates were determined according to the Paris law by the standard procedure (ASTM E647) to evaluate the behaviour of different welded joint zones under amplitude loading. The results obtained for A516 Gr. 60 structural steel showed why it is widely used in the case of static loads, since the minimum value of fracture toughness (185 MPa√m) provides relatively large critical crack lengths, whereas its behaviour under amplitude loading indicated a need for further improvement in WM and HAZ, since the crack growth rate reached values as high as 4.58 × 10−4 mm/cycle. In addition, risk-based analysis was applied to assess the structural integrity of a pressure vessel, including comparison with the high-strength low-alloy (HSLA) steel NIOVAL 50, proving once again its superior behaviour under static loading.
- Open Access
Effect of Temperature on S32750 Duplex Steel Welded Joint Impact Toughness
The search for alternative materials that can be used for parts of aircraft hydraulic systems has led to the idea of applying S32750 duplex steel for this purpose. This steel is mainly used in the oil and gas, chemical, and food industries. The reasons for this lie in this material’s exceptional welding, mechanical, and corrosion resistance properties. In order to verify this material’s suitability for aircraft engineering applications, it is necessary to investigate its behaviour at various temperatures since aircrafts operate at a wide range of temperatures. For this reason, the effect of temperatures in the range from +20 °C to −80 °C on impact toughness was investigated in the case of S32750 duplex steel and its welded joints. Testing was performed using an instrumented pendulum to obtain force–time and energy–time diagrams, which allowed for more detailed assessment of the effect of testing temperature on total impact energy and its components of crack initiation energy and crack propagation energy. Testing was performed on standard Charpy specimens extracted from base metal (BM), welded metal (WM), and the heat-affected zone (HAZ). The results of these tests indicated high values of both crack initiation and propagation energies at room temperature for all the zones (BM, WM, and HAZ) and sufficient levels of crack propagation and total impact energies above −50 °C. In addition, fractography was conducted through optical microscopy (OM) and scanning electron microscopy (SEM), indicating ductile vs. cleavage fracture surface areas, which corresponded well with the impact toughness values. The results of this research confirm that the use of S32750 duplex steel in the manufacturing of aircraft hydraulic systems has considerable potential, and future work should confirm this.
Open AccessEffect of Temperature on S32750 Duplex Steel Welded Joint Impact Toughness
The search for alternative materials that can be used for parts of aircraft hydraulic systems has led to the idea of applying S32750 duplex steel for this purpose. This steel is mainly used in the oil and gas, chemical, and food industries. The reasons for this lie in this material’s exceptional welding, mechanical, and corrosion resistance properties. In order to verify this material’s suitability for aircraft engineering applications, it is necessary to investigate its behaviour at various temperatures since aircrafts operate at a wide range of temperatures. For this reason, the effect of temperatures in the range from +20 °C to −80 °C on impact toughness was investigated in the case of S32750 duplex steel and its welded joints. Testing was performed using an instrumented pendulum to obtain force–time and energy–time diagrams, which allowed for more detailed assessment of the effect of testing temperature on total impact energy and its components of crack initiation energy and crack propagation energy. Testing was performed on standard Charpy specimens extracted from base metal (BM), welded metal (WM), and the heat-affected zone (HAZ). The results of these tests indicated high values of both crack initiation and propagation energies at room temperature for all the zones (BM, WM, and HAZ) and sufficient levels of crack propagation and total impact energies above −50 °C. In addition, fractography was conducted through optical microscopy (OM) and scanning electron microscopy (SEM), indicating ductile vs. cleavage fracture surface areas, which corresponded well with the impact toughness values. The results of this research confirm that the use of S32750 duplex steel in the manufacturing of aircraft hydraulic systems has considerable potential, and future work should confirm this.
- Open Access
The Effect of Material Heterogeneity and Temperature on Impact Toughness and Fracture Resistance of SA-387 Gr. 91 Welded Joints
This paper presents the analysis of the behavior of welded joints made of 9–12% Cr-Mo steel SA-387 Gr. 91. The successful application of this steel depends not only on the base metal’s (BM) properties but even more on heat-affected-zone (HAZ) and weld metal (WM), both at room and at operating temperature. Impact testing of specimens with a notch in BM, HAZ, and WM was performed on a Charpy instrumented pendulum to enable the separation of the total energy in crack-initiation and crack-propagation energy. Fracture toughness was also determined for all three zones, applying standard procedure at both temperatures. Results are analyzed to obtain a deep insight into steel SA 387 Gr. 91’s crack resistance properties at room and operating temperatures. Results are also compared with results obtained previously for A-387 Gr. B to assess the effect of an increased content of Chromium.
Open AccessThe Effect of Material Heterogeneity and Temperature on Impact Toughness and Fracture Resistance of SA-387 Gr. 91 Welded Joints
This paper presents the analysis of the behavior of welded joints made of 9–12% Cr-Mo steel SA-387 Gr. 91. The successful application of this steel depends not only on the base metal’s (BM) properties but even more on heat-affected-zone (HAZ) and weld metal (WM), both at room and at operating temperature. Impact testing of specimens with a notch in BM, HAZ, and WM was performed on a Charpy instrumented pendulum to enable the separation of the total energy in crack-initiation and crack-propagation energy. Fracture toughness was also determined for all three zones, applying standard procedure at both temperatures. Results are analyzed to obtain a deep insight into steel SA 387 Gr. 91’s crack resistance properties at room and operating temperatures. Results are also compared with results obtained previously for A-387 Gr. B to assess the effect of an increased content of Chromium.
- Open Access
Microstructure and Fatigue Properties of Resistance Element Welded Joints of DP500 Steel and AW 5754 H22 Aluminum Alloy
The modern concept of lightweight design (LW) requires the application of different materials in one structure (multi-material structures). The structure of different materials has a good perspective for application in the automotive and aerospace industries but only if it is possible to achieve a quality joint between different materials. The most used technology for joining different materials in the automotive industry is Resistance spot welding (RSW). Due to different mechanical, physical, and chemical properties, the joining of different materials by RSW technology does not provide a quality joint, and accordingly, alternative technologies for joining different materials have emerged. Resistance element welding (REW) was developed to enable joint of different materials. This paper presents the welding of AW 5754 H22 Al alloy (1.0 mm-thick) and DP500 steel (1.5 mm-thick) using novel REW. The peak load, absorption energy, microstructure, microhardness and fatigue strength of the REW joint has been investigated. The joint of the same materials has been done also using conventional RSW to compare some results. The results that will be presented in this paper show that that REW can achieve reliable joining of the two materials at relatively low welding currents compared to RSW. Using REW process with a significantly lower welding current, satisfactory mechanical characteristics of the weld joint can be achieved, so peak load is between 2300–2500 N, displacement is between 2.5–3 mm and the absorption energy is between 3.3–5.7 J. REW joints showed fatigue strength with the fatigue limit of 882 N.
Open AccessMicrostructure and Fatigue Properties of Resistance Element Welded Joints of DP500 Steel and AW 5754 H22 Aluminum Alloy
The modern concept of lightweight design (LW) requires the application of different materials in one structure (multi-material structures). The structure of different materials has a good perspective for application in the automotive and aerospace industries but only if it is possible to achieve a quality joint between different materials. The most used technology for joining different materials in the automotive industry is Resistance spot welding (RSW). Due to different mechanical, physical, and chemical properties, the joining of different materials by RSW technology does not provide a quality joint, and accordingly, alternative technologies for joining different materials have emerged. Resistance element welding (REW) was developed to enable joint of different materials. This paper presents the welding of AW 5754 H22 Al alloy (1.0 mm-thick) and DP500 steel (1.5 mm-thick) using novel REW. The peak load, absorption energy, microstructure, microhardness and fatigue strength of the REW joint has been investigated. The joint of the same materials has been done also using conventional RSW to compare some results. The results that will be presented in this paper show that that REW can achieve reliable joining of the two materials at relatively low welding currents compared to RSW. Using REW process with a significantly lower welding current, satisfactory mechanical characteristics of the weld joint can be achieved, so peak load is between 2300–2500 N, displacement is between 2.5–3 mm and the absorption energy is between 3.3–5.7 J. REW joints showed fatigue strength with the fatigue limit of 882 N.
- 1 January 2022
- Published by Društvo za unapređivanje zavarivanja u Srbiji - DUZS in Zavarivanje i zavarene konstrukcije
- Vol. 67 (2) , 53-61
Crack initiation and growth in welded joint of steel for operation at elevated temperature
In a paper given, experimental investigations have included the analysis of crack initiation and growth in welded joint of steel for operation at elevated temperatures. For better understanding of the phenomenon of crack initiation and propagation in welded joints of A-204 Gr. A steel, designed for high-temperature and high-pressure application, it is necessary to determine the effect of heterogeneity of microstructural and mechanical properties on fracture toughness and fatigue crack initiation and propagation in welded components. Based on the tests conducted with pre-cracked CT and Charpy size specimens, the effect of heterogeneity of microstructural and mechanical properties of welded joints on fracture toughness and fatigue-crack growth parameters was determined.
- 1 January 2022
- Published by Društvo za unapređivanje zavarivanja u Srbiji - DUZS in Zavarivanje i zavarene konstrukcije
- Vol. 67 (2) , 53-61
Crack initiation and growth in welded joint of steel for operation at elevated temperature
In a paper given, experimental investigations have included the analysis of crack initiation and growth in welded joint of steel for operation at elevated temperatures. For better understanding of the phenomenon of crack initiation and propagation in welded joints of A-204 Gr. A steel, designed for high-temperature and high-pressure application, it is necessary to determine the effect of heterogeneity of microstructural and mechanical properties on fracture toughness and fatigue crack initiation and propagation in welded components. Based on the tests conducted with pre-cracked CT and Charpy size specimens, the effect of heterogeneity of microstructural and mechanical properties of welded joints on fracture toughness and fatigue-crack growth parameters was determined.
- Open Access
Numerical and Experimental Investigations of Fracture Behaviour of Welded Joints with Multiple Defects
Current standards related to welded joint defects (EN ISO 5817) only consider individual cases (i.e., single defect in a welded joint). The question remains about the behaviour of a welded joint in the simultaneous presence of several different types of defects, so-called multiple defects, which is the topic of this research. The main focus is on defects most commonly encountered in practice, such as linear misalignments, undercuts, incomplete root penetration, and excess weld metal. The welding procedure used in this case was metal active gas welding, a common technique when it comes to welding low-alloy low-carbon steels, including those used for pressure equipment. Different combinations of these defects were deliberately made in welded plates and tested in a standard way on a tensile machine, along with numerical simulations using the finite element method (FEM), based on real geometries. The goal was to predict the behaviour in terms of stress concentrations caused by geometry and affected by multiple defects and material heterogeneity. Numerical and experimental results were in good agreement, but only after some modifications of numerical models. The obtained stress values in the models ranged from noticeably lower than the yield stress of the used materials to slightly higher than it, suggesting that some defect combinations resulted in plastic strain, whereas other models remained in the elastic area. The stress–strain diagram obtained for the first group (misalignment, undercut, and excess root penetration) shows significantly less plasticity. Its yield stress is very close to its ultimate tensile strength, which in turn is noticeably lower compared with the other three groups. This suggests that welded joints with misalignment and incomplete root penetration are indeed the weakest of the four groups either due to the combination of the present defects or perhaps because of an additional unseen internal defect. From the other three diagrams, it can be concluded that the test specimens show very similar behaviour with nearly identical ultimate tensile strengths and considerable plasticity. The diagrams shows the most prominent yielding, with an easily distinguishable difference between the elastic and plastic regions. The diagrams are the most similar, having the same strain of around 9% and with a less obvious yield stress limit.
Open AccessNumerical and Experimental Investigations of Fracture Behaviour of Welded Joints with Multiple Defects
Current standards related to welded joint defects (EN ISO 5817) only consider individual cases (i.e., single defect in a welded joint). The question remains about the behaviour of a welded joint in the simultaneous presence of several different types of defects, so-called multiple defects, which is the topic of this research. The main focus is on defects most commonly encountered in practice, such as linear misalignments, undercuts, incomplete root penetration, and excess weld metal. The welding procedure used in this case was metal active gas welding, a common technique when it comes to welding low-alloy low-carbon steels, including those used for pressure equipment. Different combinations of these defects were deliberately made in welded plates and tested in a standard way on a tensile machine, along with numerical simulations using the finite element method (FEM), based on real geometries. The goal was to predict the behaviour in terms of stress concentrations caused by geometry and affected by multiple defects and material heterogeneity. Numerical and experimental results were in good agreement, but only after some modifications of numerical models. The obtained stress values in the models ranged from noticeably lower than the yield stress of the used materials to slightly higher than it, suggesting that some defect combinations resulted in plastic strain, whereas other models remained in the elastic area. The stress–strain diagram obtained for the first group (misalignment, undercut, and excess root penetration) shows significantly less plasticity. Its yield stress is very close to its ultimate tensile strength, which in turn is noticeably lower compared with the other three groups. This suggests that welded joints with misalignment and incomplete root penetration are indeed the weakest of the four groups either due to the combination of the present defects or perhaps because of an additional unseen internal defect. From the other three diagrams, it can be concluded that the test specimens show very similar behaviour with nearly identical ultimate tensile strengths and considerable plasticity. The diagrams shows the most prominent yielding, with an easily distinguishable difference between the elastic and plastic regions. The diagrams are the most similar, having the same strain of around 9% and with a less obvious yield stress limit.
- Open Access
- 1 January 2020
- Published by National Library of Serbia in Chemical Industry and Chemical Engineering Quarterly
- Vol. 26 (2) , 183-190
Influence of the octogen quality and production scale on characteristics of granulated plastic bonded explosive
- 1 January 2020
- Published by National Library of Serbia in Chemical Industry and Chemical Engineering Quarterly
- Vol. 26 (2) , 183-190
Open AccessInfluence of the octogen quality and production scale on characteristics of granulated plastic bonded explosive
- Open Access
- 1 November 2019
- Published by University of Slavonski Brod in Tehnicki vjesnik - Technical Gazette
- Vol. 26 (6) , 1658-1663
Improvement of Shaped Charge Penetration Capability and Disturbation of the Jet by Explosive Reactive Armor
This paper presents a numerical study of the effect of main parameters (liner material, explosive charge, stand-off distance and the presence of the wave-shaper), on one hand, on the jet formation, jet velocity and the jet length, and on...
- 1 November 2019
- Published by University of Slavonski Brod in Tehnicki vjesnik - Technical Gazette
- Vol. 26 (6) , 1658-1663
Open AccessImprovement of Shaped Charge Penetration Capability and Disturbation of the Jet by Explosive Reactive Armor
This paper presents a numerical study of the effect of main parameters (liner material, explosive charge, stand-off distance and the presence of the wave-shaper), on one hand, on the jet formation, jet velocity and the jet length, and on...
- Open Access
- 1 April 2019
- Published by University of Slavonski Brod in Tehnicki vjesnik - Technical Gazette
- Vol. 26 (2) , 571-575
The Equation for the Optimum Dosage of Coagulant for Water Treatment Plant
This paper shows the importance of the equation for the optimum dosage of coagulant and its application to water treatment plant. The optimum coagulant dose during the operation of the water treatment plant "Gorina" in Serbia was...
- 1 April 2019
- Published by University of Slavonski Brod in Tehnicki vjesnik - Technical Gazette
- Vol. 26 (2) , 571-575
Open AccessThe Equation for the Optimum Dosage of Coagulant for Water Treatment Plant
This paper shows the importance of the equation for the optimum dosage of coagulant and its application to water treatment plant. The optimum coagulant dose during the operation of the water treatment plant "Gorina" in Serbia was...