WEDM Process Parameters Investigation on the Concave Profile of Ti Implant Material Using the Desirability Approach
Open Access
- 18 February 2025
- conference paper
- Published by IEOM Society International
Abstract
WEDM is used chiefly for machining Titanium and its alloys with good dimensional accuracy and surface finish. The research work has been done with the BBD of the RSM technique, and further multi-response optimization was done through the desirability function. The results of the research work shows that the effect of input variables pulse on-time (POT), pulse off-time (POFT,) spark gap voltage (SGV), and concave profile radius (CPR) on the output variables surface roughness (SR), and geometric error (GE) have been investigated. It observed that POT is the primary significant factor affecting the SR, and GE. With increases in CPR, Geometric error also increases. CPR is the most critical factor for the geometric error, with an 82.83% contribution. Experiment results also shows that POT and POFT significantly affected the surface integrity with the formation of pockmarks, overlapping craters, micro-cracks, and recast layer.WEDM is used chiefly for machining Titanium and its alloys with good dimensional accuracy and surface finish. The research work has been done with the BBD of the RSM technique, and further multi-response optimization was done through the desirability function. The results of the research work shows that the effect of input variables pulse on-time (POT), pulse off-time (POFT,) spark gap voltage (SGV), and concave profile radius (CPR) on the output variables surface roughness (SR), and geometric error (GE) have been investigated. It observed that POT is the primary significant factor affecting the SR, and GE. With increases in CPR, Geometric error also increases. CPR is the most critical factor for the geometric error, with an 82.83% contribution. Experiment results also shows that POT and POFT significantly affected the surface integrity with the formation of pockmarks, overlapping craters, micro-cracks, and recast layer.Keywords
This publication has 10 references indexed in Scilit:
- Experimental investigation for the effects of wire EDM process parameters over the tapered cross-sectional workpieces of titanium alloys (Ti6Al-4V)Mechanical Sciences, 2020
- Investigation of cutting speed, recast layer and micro-hardness in angular machining using slant type taper fixture by WEDM of Hastelloy XMaterials Today: Proceedings, 2020
- Analysis and Optimization of Wire EDM Process of Titanium by Using GRA MethodologyMaterials Science Forum, 2019
- Experimental investigation and multi-objective optimization of micro-wire electrical discharge machining of a titanium alloy using Jaya algorithmAdvances in Production Engineering & Management, 2019
- Effect of wire electrode materials on die-corner accuracy for Wire Electrical Discharge Machining (WEDM) of Inconel 718Materials Today: Proceedings, 2018
- An intelligent approach for prediction of angular error in taper cutting using wire-EDMMaterials Today: Proceedings, 2018
- A Hybrid Approach for Process Optimization in Taper Cutting Operation Using Wire Electrical Discharge MachiningApplied Mechanics and Materials, 2014
- Modelling and multi-objective optimization of process parameters of wire electrical discharge machining using non-dominated sorting genetic algorithm-IIProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2012
- An Investigation into Machining Characteristics of Commercially Pure Titanium (Grade-2) Using CNC WEDMApplied Mechanics and Materials, 2012
- Original models for the prediction of angular error in wire-EDM taper-cuttingThe International Journal of Advanced Manufacturing Technology, 2008