Effect of Multiple Reflow Cycles and Isothermal Aging on Shear Strength in SAC305/Sn58Bi/Cu-OSP Hybrid Solder Joint
Authors:
- Flora SomidinFSFlora Somidin
- Mohd Arif Anuar Mohd SallehMSMohd Arif Anuar Mohd Salleh
Open Access
- 27 December 2024
- journal article
- Published by Penerbit Universiti Malaysia Perlis in International Journal of Nanoelectronics and Materials (IJNeaM)
- Vol. 17 (December) , 341-346
Abstract
This study investigates the effects of multiple reflow cycles and isothermal aging on the shear strength and microstructure of SAC305/Sn58Bi/Cu-OSP hybrid solder joints. The joints combine SAC305 solder spheres and Sn58Bi solder paste reflowed on Cu-OSP substrates. Microstructural analysis revealed two distinct regions: a Bi-rich phase at the bottom and an Ag-rich phase at the top. Reflow cycles and isothermal aging at 85 °C, 125 °C, and 150 °C for up to 120 hours were evaluated for their impact on mechanical performance and reliability. Shear tests at 100 mm/s and 2000 mm/s showed that hybrid joints outperformed conventional SAC305/Cu-OSP joints, even after multiple reflow cycles. Aging at 85 °C and 125 °C had minimal impact on shear strength, indicating good stability under moderate conditions. However, aging at 150 °C, above the melting point of Sn58Bi (138 °C), caused a significant decrease in strength. These findings highlight the potential of hybrid solder joints for improved mechanical performance and thermal stability, offering advantages over conventional solder joints for advanced electronic packaging.Keywords
This publication has 24 references indexed in Scilit:
- Cu–Cu joint with great strength using In/Sn–58Bi hybrid soldering at low temperature (90 °C)Journal of Materials Research and Technology, 2024
- Improvement of heat aging resistance and tensile strength of SAC305/Cu solder joints by multi-element microalloyingIntermetallics, 2024
- Effects of Sb on the properties and interfacial evolution of SAC305-2Bi-xSb/Cu solder jointsJournal of Materials Research and Technology, 2024
- Comparison of thermal-fatigue lives of conventional and hybrid solder joints: Experiment and FE analysisEngineering Failure Analysis, 2023
- Nucleation and growth of Ag3Sn in Sn-Ag and Sn-Ag-Cu solder alloysActa Materialia, 2023
- Research on thermal fatigue failure mechanism of BGA solder joints based on microstructure evolutionInternational Journal of Fatigue, 2022
- Liquid/Solid Interaction of Sn-58Bi/Sn-3.0Ag-0.5Cu Dissimilar Joints during Soldering at Low Temperature by In-Situ Synchrotron ImagingJOM, 2022
- Improved microstructure and mechanical properties for SnBi solder alloy by addition of Cr powdersJournal of Alloys and Compounds, 2019
- Failure behaviors of BGA solder joints under various loading conditions of high-speed shear testJournal of Materials Science: Materials in Electronics, 2008
- Effect of multiple reflow processes on the reliability of ball grid array (BGA) solder jointsJournal of Alloys and Compounds, 2006