Tensile load measurement of titanium bolts with detailed uncertainty analysis based on acoustoelastic theory by using an ultrasonic sensor
Authors:
Open Access
- 1 February 2026
- conference paper
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3174 (1)
Abstract
Titanium alloy fasteners are widely used in the aerospace industry. The assembly quality is critical to the reliability and safety of different kinds of components. Limited by the precision and detection efficiency, traditional methods such as the torque coefficient method and the strain gauge method can no longer meet the requirements of rapid, high-precision measurement. The acoustoelasticity method is a fast, precise, and non-destructive method that provides a solution to the above problems. This study focuses on the measurement of tensile load applied to Ti-6Al-4V (TC4) bolts. Stepwise loads are gradually and accurately applied on TC4 bolts, high-frequency echo signals are recorded, and the time-of-flight (TOF) can be calculated correspondingly. Supplemented by a precise calibration procedure, the linear fitting equation of tensile load and TOF based on acoustoelastic theory has been established. Experiment results show that, within (5 – 45) kN tensile load range, the typical relative error is below 5%. The calculated relative expanded uncertainty is around 6.0% ( k = 2). Taking sample dispersion into consideration, the relative expanded uncertainty of the bolt population can be statistically calculated within 8.5% ( k = 2).Keywords
This publication has 19 references indexed in Scilit:
- Experimental study of both bending moment and preload effect on the stress cycle upon bolts in a tee-stubMatériaux & Techniques, 2023
- Influence of different ultrasonic transducers on the precision of fastening force measurementApplied Acoustics, 2022
- A novel method for Estimating Time of Flight of ultrasonic echoes through short-time Fourier transformsUltrasonics, 2020
- Bolt preload measurement based on the acoustoelastic effect using smart piezoelectric boltSmart Materials and Structures, 2019
- High-Precision Time-of-Flight Determination Algorithm for Ultrasonic Flow MeasurementIEEE Transactions on Instrumentation and Measurement, 2018
- Bolt axial stress measurement based on a mode-converted ultrasound method using an electromagnetic acoustic transducerUltrasonics, 2014
- Time-of-flight measurement techniques for airborne ultrasonic rangingIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2013
- Real-time monitoring of clamping force of a bolted joint by use of automatic digital image correlationOptics & Laser Technology, 2009
- An overview on the use of titanium in the aerospace industryMaterials Science and Engineering: A, 1996
- Second-Order Elastic Deformation of SolidsPhysical Review B, 1953