A comparison of fracture strength of yttrium‐oxide‐ partially‐stabilized zirconia ceramic crowns with varying core thickness, shapes and veneer ceramics
Authors:
- 22 June 2004
- journal article
- research article
- Published by Wiley in Journal of Oral Rehabilitation
- Vol. 31 (7) , 682-688
Abstract
summary The fracture strengths of stylized all‐ceramic crowns manufactured using an yttrium‐oxide‐partially‐stabilized (Y‐TZP) zirconia ceramic core (Denzir) veneered with lithium disilicate glass‐ceramics (IPS Empress 2 or IPS Eris) were evaluated. The Denzir cores were manufactured in two ways: either with different thickness in different parts of the restoration, called an ‘adapted Denzir core’; or with a uniform core thickness of 0·5 mm. IPS Empress 2 all‐ceramic crowns served as reference. There was no significant difference between the crowns with an ‘adapted Denzir core’ veneered with the two brands of glass‐ceramics. No significant difference was seen between the crowns with a 0·5 mm Denzir core veneered with the two brands of glass‐ceramics. The crowns with an ‘adapted Denzir core’ exhibited significantly higher values than those with a 0·5 mm Denzir core and than the IPS Empress 2 crowns used as reference. No significant differences were seen among the IPS Empress 2 crowns used as reference and the crowns with a 0·5 mm Denzir core. The mode of failure varied among the Empress 2 crowns and the crowns with a core of a Y‐TZP zirconia ceramic. Long‐term studies are necessary to assess the clinical performance of this restorative system.Keywords
This publication has 8 references indexed in Scilit:
- Crack Initiation Modes in Bilayered Alumina/Porcelain Disks as a Function of Core/Veneer Thickness Ratio and Supporting Substrate StiffnessJournal of Dental Research, 2000
- A comparison of the microstructure and properties of the IPS Empress 2 and the IPS Empress glass-ceramicsJournal of Biomedical Materials Research, 2000
- Resistance to Fracture of Three All‐Ceramic SystemsJournal of Esthetic and Restorative Dentistry, 1998
- Relative fracture toughness and hardness of new dental ceramicsThe Journal of Prosthetic Dentistry, 1995
- Failure of All-ceramic Fixed Partial Dentures in vitro and in vivo: Analysis and ModelingJournal of Dental Research, 1995
- Fracture Surface Characterization of Clinically Failed All-ceramic CrownsJournal of Dental Research, 1994
- Fracture-surface analysis of dental ceramicsThe Journal of Prosthetic Dentistry, 1989
- Mechanical properties and short‐term in vivo evaluation of yttrium‐oxide‐partially‐stabilized zirconiaJournal of Biomedical Materials Research, 1989