Macroscopic Effects of Surface Roughness in Confined Air Flow
Authors:
- 1 March 2004
- journal article
- Published by ASME International in Journal of Fluids Engineering
- Vol. 126 (2) , 216-222
Abstract
The general framework deals with the winding of thin plastic films, in order to obtain good-quality rolls. This issue is tightly connected to the thickness of the residual air layer entrapped between the film layers. It is then of importance to optimize the surface topography of the films so that to improve the quality of the wound rolls. In a previous work, we proposed a simple model for the flow of an air layer squeezed between a solid smooth substrate and a plastic film sample: it was shown experimentally that the macroscopic characteristics of the flow are connected to the film roughness, but how? In order to answer this question, we assimilated the confined air flow to a flow through a periodic array of cylinders and a mathematical model based on homogenization techniques was developed. In the present paper, we search for pertinent parameters which describe the real surface roughness of plastic films. The experiments were carried out by using a 3-D roughness measurement device and the first observation is that the roughness distribution is not uniform. We made a sampling expressed by the percentage of peaks exceeding some given height threshold. The corresponding experimental parameters are used to define the network of cylinders. For each type of film, the threshold value is the only adjustable parameter and the following results are obtained: It is possible to adjust this parameter so that to obtain a very good agreement between the experimental data and the theoretical predictions. In addition, the smoother the film, the more important the highest peaks are in terms of air leakage.Keywords
This publication has 11 references indexed in Scilit:
- Macroscopic Effects of Surface Roughness in Confined Air-Flow2002
- Effective boundary conditions for Stokes flow over a rough surfaceJournal of Fluid Mechanics, 1996
- Tribology and Mechanics of Magnetic Storage Devices1996
- Roughness-Induced Shear- and Squeeze-Film Effects in Magnetic Recording—Part II: ApplicationsJournal of Tribology, 1989
- Resolution of a Core Problem in Wound RollsJournal of Applied Mechanics, 1980
- Stokes flow around a circular cylindrical post confined between two parallel platesJournal of Fluid Mechanics, 1969
- Anisotropic Relaxation of Internal Forces in a Wound Reel of Magnetic TapeJournal of Applied Mechanics, 1967
- Contact of nominally flat surfacesProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1966
- A review of squeeze filmsWear, 1965
- Gravitational stresses in accreted bodiesProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1963