The Effect of Coated Electrodes on MRR of Titanium Metal by Spark Machining
Authors:
- 14 May 2022
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 107-113
Abstract
The electric spark cutting process is one of the most important cutting processes in the world of industry because it allows for the cutting of metals with a high hardness and the formation of complex shapes. The purpose of this research is to investigate the influence of four copper electrodes on the material removal rate (MRR) when cutting titanium metal. Three copper electrodes were coated with various materials (nickel, silver, and gold). The inputs for the practical side were current in values (12, 24, and 42 A) and pulse on time in values (200, 400, and 600 µs). Optimal outcomes were achieved by the use of the analysis method (full factorial design). According to the practical results the MRR increases as the current and pulse on time increase. The electrode coated with gold had the highest MRR (139.6507mm 3 /min), while the electrode coated with nickel had the lowest MRR (5.8652 mm 3 /min). Furthermore, the predicted results are very closely to the practical resultsKeywords
This publication has 12 references indexed in Scilit:
- Effect of input parameters on MRR and EWR for tool steel AISI L2 by electric discharge machine (EDM)IOP Conference Series: Materials Science and Engineering, 2021
- Development and application of Cu-SWCNT nanocomposite–coated 6061Al electrode for EDMThe International Journal of Advanced Manufacturing Technology, 2019
- Investigation on the Performance of Copper-Coated 6061 Aluminium Alloy Electrode in Electric Discharge Machining2019
- Effect of Electrode Materials on Different EDM Aspects of Titanium AlloySilicon, 2018
- Analysis of MRR and Surface Roughness in Machining Ti-6Al-4V ELI Titanium Alloy Using EDM ProcessProcedia Manufacturing, 2018
- Optimization of Electro Discharge Machining Process Parameters With Fuzzy Logic for Stainless Steel 304 (ASTM A240)Journal of Manufacturing Science and Engineering, 2017
- Electrical Discharge Machining (EDM): A ReviewInternational Journal of Engineering Materials and Manufacture, 2016
- An experimental study for determination of the effects of machining parameters on surface roughness in electrical discharge machining (EDM)The International Journal of Advanced Manufacturing Technology, 2005
- Some investigations into the electric discharge machining of hardened tool steel using different electrode materialsJournal of Materials Processing Technology, 2004
- State of the art electrical discharge machining (EDM)International Journal of Machine Tools and Manufacture, 2003