Cerium Reduction by Aluminum and Calcium Carbide from Cerium-Containing Slags
- 8 January 2024
- journal article
- research article
- Published by Pleiades Publishing Ltd in Russian Metallurgy (Metally)
- Vol. 2024 (1) , 85-90
Abstract
—Under increasing requirements for the properties of steels, one of the ways to produce a high-quality product is microalloying with rare earth elements such as cerium, which can significantly influence the mechanical properties of steel even at low concentrations. To reduce the cost of steel, it is rational to introduce it into steel by direct reduction from oxide systems rather than by adding ferroalloys. To study this process, thermodynamic modeling of cerium reduction by aluminum and calcium carbide from slags of the CaO–SiO2–Ce2O3 system containing 15% Al2O3 and 8% MgO at temperatures of 1550 and 1650°C is carried out. The modeling is performed using the HSC 6.12 Chemistry (Outokumpu) software package based on Gibbs energy minimization using the simplex lattice planning method. The results of thermodynamic modeling are presented in the form of composition–property diagrams (equilibrium cerium content in a metal) for temperatures of 1550 and 1650°C. When metallic aluminum is used as a reducing agent, an increase in the slag basicity (CaO/SiO2) from 2 to 5 at a temperature of 1550°C leads to an increase in the equilibrium cerium content in the metal from 2 to 20 ppm in the concentration range 0–15% Ce2O3; that is, an increase in the slag basicity favorably affects the development of cerium reduction. An increase in metal temperature also exerts a positive effect on cerium reduction by aluminum. When the temperature increases to 1650°C, the equilibrium cerium content in the metal increases from 4 to 30 ppm in the concentration range 0–15% Ce2O3. The use of calcium carbide as a reducing agent leads to an increase in the cerium concentration in the metal to 30 and 40 ppm at 1550 and 1650°C, respectively, at a basicity of 5. The decisive role of slag basicity, cerium oxide concentration, and temperature factor in the development of cerium reduction by aluminum and calcium carbide has been confirmed.Keywords
This publication has 11 references indexed in Scilit:
- Thermodynamic Simulation and Experimental Investigation of the Calciothermic Reduction of Metals from Manganese and Iron NiobatesRussian Metallurgy (Metally), 2022
- Design and Fluidity Research of a New Tundish Flux for Rare Earth SteelJournal of Sustainable Metallurgy, 2022
- Effect of Ce2O3 on the Melt Structure and Properties of CaO–Al2O3-based SlagISIJ International, 2022
- Study of possibility of cerium reduction from slags of CaO-SiO2-Ce2O3–15%Al2O3–8%MgO systemIOP Conference Series: Materials Science and Engineering, 2020
- Evolution of Pearlite Microstructure in Low-Carbon Cast Microalloyed Steel Due to the Addition of La and CeMetallurgical and Materials Transactions A, 2018
- Effect of Ce 2 O 3 and CaO/Al 2 O 3 on the Phase, Melting Temperature and Viscosity of CaO-Al 2 O 3 -10 Mass% SiO 2 Based SlagsHigh Temperature Materials and Processes, 2013
- Influence of alloying by rare-earth metals on the mechanical properties of 17g1s pipe steelMaterials Science, 2013
- Effect of refining slag containing Ce2O3 on steel cleanlinessJournal of Rare Earths, 2011
- Effects of rare earth oxide on hardfacing metal microstructure of medium carbon steel and its refinement mechanismJournal of Rare Earths, 2011
- Sulphur Partition between CaO-SiO2-Ce2O3 Slags and Carbon-saturated Iron.ISIJ International, 1993