Effect of Zn on the intermetallics formation and reliability of Sn-3.5Ag solder on a Cu pad
Authors:
- 1 July 2007
- journal article
- Published by Springer Nature in Journal of Materials Research
- Vol. 22 (7) , 1879-1887
Abstract
Varying amounts of Zn (1, 3, and 7 wt%) were added to Sn–3.5Ag solder on a Cu pad, and the resultant solder joint microstructures after a reflow and isothermal aging (150 °C, up to 500 h) were investigated using scanning electron microscopy, energy dispersive x-ray, and x-ray diffraction, which were subsequently correlated to the results of microhardness and drop tests. Zinc was effective in improving the drop resistance of Sn–3.5Ag solder on the Cu pad, and an addition of 3 wt% Zn nearly doubled the number of drops-to-failure (Nf). The beneficial role of Zn was ascribed to suppression of Cu6Sn5and precipitation of Zn-containing intermetallic compounds (IMCs). However, the Zn effect was reduced as Cu6Sn5and Ag3Sn precipitated in a joint IMC layer after prolonged aging. The interface between Ag5Zn8and Cu5Zn8was resistant to drop impact, but two other layered IMC structures of Cu6Sn5/Cu3Sn and Cu5Zn8/Cu6Sn5were not.Keywords
This publication has 29 references indexed in Scilit:
- Effect of Cu content on the mechanical reliability of Ni/Sn–3.5Ag systemJournal of Materials Research, 2007
- Phase equilibria of the Sn–Zn–Cu ternary systemActa Materialia, 2006
- Role of Ag in the formation of interfacial intermetallic phases in Sn-Zn solderingJournal of Electronic Materials, 2005
- Microstructure and mechanical properties of lead-free solders and solder joints used in microelectronic applicationsIBM Journal of Research and Development, 2005
- Microstructure evolution and shear strength of eutectic Sn-9Zn and Sn-0.7Cu lead-free BGA solder balls2004
- Interfacial reactions and impact reliability of Sn–Zn solder joints on Cu or electroless Au/Ni(P) bond-padsJournal of Materials Research, 2004
- Interfacial Microstructure Evolution Between Eutectic SnAgCu Solder and Al/Ni(V)/Cu Thin FilmsJournal of Materials Research, 2002
- Influence of P Content in Electroless Plated Ni-P Alloy Film on Interfacial Structures and Strength between Sn-Zn Solder and Plated Au/Ni-P Alloy FilmMATERIALS TRANSACTIONS, 2002
- Creep, stress relaxation, and plastic deformation in Sn-Ag and Sn-Zn eutectic soldersJournal of Electronic Materials, 1997
- Interfacial reactions during soldering with lead-tin eutectic and lead (Pb)-free, tin-rich soldersJournal of Electronic Materials, 1996