[Retracted] Improvement on Mechanical Properties of Submerged Friction Stir Joining of Dissimilar Tailor Welded Aluminum Blanks
Open Access
- 1 January 2021
- journal article
- retracted article
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2021 (1)
Abstract
Friction stir welding is a solid‐state welding method that produces joints with superior mechanical and metallurgical properties. However, the negative effects of the thermal cycle during welding dent the mechanical performance of the weld joint. Hence, in this research study, the joining of aluminum tailor welded blanks by friction stir welding is carried out in underwater conditions by varying the welding parameters. The tensile tests revealed that the underwater welded samples showed better results when compared to the air welded samples. Maximum tensile strength of 229.83 MPa was obtained at 1000 rpm, 36 mm/min. The improved tensile strength of the underwater welded samples was credited to the suppression of the precipitation of the secondary precipitates due to the cooling action provided by the water. The lowest hardness of 72 HV was obtained at the edge of the stir zone which indicated the weakest region in the weld zone.Keywords
This publication has 26 references indexed in Scilit:
- Effect of tool rotational speed and pin profile on microstructure and tensile strength of dissimilar friction stir welded AA5083-H111 and AA6351-T6 aluminum alloysMaterials & Design (1980-2015), 2012
- Submerged Friction-Stir Welding (SFSW) Underwater and Under Liquid Nitrogen: An Improved Method to Join Al Alloys to Mg AlloysMetallurgical and Materials Transactions A, 2012
- Improvement of weld temperature distribution and mechanical properties of 7050 aluminum alloy butt joints by submerged friction stir weldingMaterials & Design (1980-2015), 2011
- Mechanical properties of underwater friction stir welded 2219 aluminum alloyTransactions of Nonferrous Metals Society of China, 2010
- On the role of process variables in the friction stir processing of cast aluminum A319 alloyMaterials & Design (1980-2015), 2010
- Mechanical behaviour of similar and dissimilar AA5182-H111 and AA6016-T4 thin friction stir weldsMaterials & Design (1980-2015), 2009
- Mechanical properties and microstructure of friction stir welded tailor-made blanksMaterials Science and Engineering: A, 2008
- Recent advances in friction-stir welding – Process, weldment structure and propertiesProgress in Materials Science, 2008
- Dissimilar friction stir welds in AA5083-AA6082. Part I: Process parameter effects on thermal history and weld propertiesMetallurgical and Materials Transactions A, 2006
- Microstructure and mechanical properties of friction stir welded aluminium alloys with special reference to AA 5083 and AA 6082Science and Technology of Welding and Joining, 2000