Effect of Extraction and Adsorption on Re-refining of Used Lubricating Oil
Authors:
Open Access
- 19 February 2009
- journal article
- Published by EDP Sciences in Oil & Gas Science and Technology – Revue d’IFP Energies nouvelles
- Vol. 64 (2) , 191-197
Abstract
Solvent extraction followed by adsorption has been found to be one of the competitive processes for recycling of waste lubricating oil. In this paper, the performance of various solvents for sludge formation has been studied. 1-butanol produced maximum sludge followed by methyl ethyl ketone (MEK), 1-hexanol and 2-butanol. The difference in sludge formation between 1-butanol and MEK was only 0.3%. However due to low boiling point and low cost, MEK was preferred over 1-butanol. The extracted oil was then passed through a column of different adsorbents. An oil of colour index (yellow) 2, carbon residue 0.14%, sulphated ash 0.02% and flash point 216°C, was obtained with 94% yield. L'extraction par solvant suivie d'adsorption est considérée comme l'un des procédés les plus performants pour le recyclage des huiles usagées. Dans cet article, la performance de divers solvants pour la formation de boues a été étudiée. Le 1-butanol produit le plus de boues, suivi de la méthyle éthyle cétone (MEK), puis du 1-hexanol et du 2-butanol. La différence de formation des boues n'est que de 0,3 % entre le 1-butanol et le MEK. Cependant, en raison de son faible point d'ébullition et de son faible coût, le MEK a été préféré au 1-butanol. L'huile extraite est ensuite passée à travers une colonne de différents adsorbants. Une huile d'indice de couleur 2 (jaune), à 0,14 % de résidu de carbone, 0,02 % de cendres sulfatées et 216 °C de point d'éclair, a été obtenue avec 94 % de rendement.Keywords
This publication has 10 references indexed in Scilit:
- Regeneration of used lubricant oil by ethane extractionThe Journal of Supercritical Fluids, 2007
- Regeneration of Used Lubricant Oil by Polar Solvent ExtractionIndustrial & Engineering Chemistry Research, 2005
- Used lubricating oil recycling using hydrocarbon solventsJournal of Environmental Management, 2005
- Regeneration of Used Lubricant Oil by Propane ExtractionIndustrial & Engineering Chemistry Research, 2003
- A method of predicting effective solvent extraction parameters for recycling of used lubricating oilsChemical Engineering and Processing - Process Intensification, 2002
- Radiation technologies for production and regeneration of motor fuel and lubricantsRadiation Physics and Chemistry, 2002
- SOLVENT REFINING OF WASTE LOCOMOTIVE OILPetroleum Science and Technology, 1999
- The Extraction−Flocculation Re-refining Lubricating Oil Process Using Ternary Organic SolventsIndustrial & Engineering Chemistry Research, 1997
- Chemistry and Technology of Lubricants1992
- Recycling Waste Lube Oils for Profit (UOP Direct Contact Hydrogenation Process)Hazardous Waste and Hazardous Materials, 1989