An optimized rapid aluminum back surface field technique for silicon solar cells
Authors:
- A. RohatgiARA. Rohatgi
- A.W. WeeberAWA.W. Weeber
- 1 July 1999
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 46 (7) , 1363-1370
Abstract
Screen-printing and rapid thermal annealing have been combined to achieve an aluminum-alloyed back surface field (Al-BSF) that lowers the effective back surface recombination velocity (S/sub eff/) to approximately 200 cm/s for solar cells formed on 2.3 /spl Omega/-cm Si. Analysis and characterization of the BSF structures show that this formation process satisfies the two main requirements for achieving low S/sub eff/: (1) deep p/sup +/ regions and (2) uniform junctions. Screen-printing is ideally suited for fast deposition of thick Al films which, upon alloying, result in deep BSF regions. Use of a rapid alloying treatment is shown to significantly improve the BSF junction uniformity and reduce S/sub eff/. The Al-BSFs formed by screen-printing and rapid alloying have been integrated into both laboratory and industrial-type fabrication sequences to achieve solar cell efficiencies in excess of 19.0 and 17.0%, respectively, on planar 2.3 /spl Omega/-cm float zone Si. For both process sequences, these cell efficiencies are 1-2% (absolute) higher than analogous cells made with unoptimized Al-BSFs or highly recombinative rear surfaces.Keywords
This publication has 17 references indexed in Scilit:
- Metal-insulator-semiconductor inversion layer solar cells by using rapid thermal processingApplied Physics Letters, 1995
- Boron doping of silicon using coalloying with aluminiumApplied Physics Letters, 1994
- The Effect of Aluminum Thickness on Solar Cell PerformanceJournal of the Electrochemical Society, 1994
- Effective recombination velocity of low-high junctionsSolid-State Electronics, 1988
- High-low junctions for solar cell applicationsSolid-State Electronics, 1981
- Operating limits of Al-alloyed high-low junctions for BSF solar cellsSolid-State Electronics, 1981
- Physical operation of back-surface-field silicon solar cellsIEEE Transactions on Electron Devices, 1977
- Minority carrier reflecting properties of semiconductor high-low junctionsSolid-State Electronics, 1975
- The effects of alloying material on regrowth-layer structure in silicon power devicesJournal of Materials Science, 1971
- The controlling factors in semiconductor large area alloying technologyJournal of Materials Science, 1968