Role of substrate material in failure of crown‐like layer structures
Authors:
- 4 October 2006
- journal article
- research article
- Published by Wiley in Journal of Biomedical Materials Research Part B: Applied Biomaterials
- Vol. 81B (2) , 305-311
Abstract
The role of substrate modulus on critical loads to initiate and propagate radial cracks to failure in curved brittle glass shells on compliant polymeric substrates is investigated. Flat glass disks are used to drive the crack system. This configuration is representative of dental crown structures on dentin support in occlusal contact. Specimens are fabricated by truncating glass tubes and filling with epoxy‐based substrate materials, with or without alumina filler for modulus control. Moduli ranging from 3 to 15 GPa are produced in this way. Critical loads for both initiation and propagation to failure increase monotonically with substrate modulus, by a factor of two over the data range. Fracture mechanics relations provide a fit to the data, within the scatter bands. Finite element analysis is used to determine stress distributions pertinent to the observed fracture modes. It is suggested that stiffer substrate materials offer potential for improved crown lifetime in dental practice. © 2006 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2006Keywords
This publication has 30 references indexed in Scilit:
- Failure of curved brittle layer systems from radial cracking in concentrated surface loadingJournal of Materials Research, 2005
- Effect of off‐axis concentrated loading on failure of curved brittle layer structuresJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2005
- Deep‐penetrating conical cracks in brittle layers from hydraulic cyclic contactJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2005
- Contact damage in brittle coating layers: Influence of surface curvatureJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2004
- Overview: Damage in brittle layer structures from concentrated loadsJournal of Materials Research, 2002
- Ceramic-based layer structures for biomechanical applicationsCurrent Opinion in Solid State and Materials Science, 2002
- Use of contact testing in the characterization and design of all-ceramic crownlike layer structures: A reviewThe Journal of Prosthetic Dentistry, 2001
- Survival of Dicor glass-ceramic dental restorations over 16 years. Part III: Effect of luting agent and tooth or tooth-substitute core structureThe Journal of Prosthetic Dentistry, 2001
- Cracking of Brittle Coatings Adhesively Bonded to Substrates of Unlike ModulusJournal of Materials Research, 2000
- CERAMICS IN RESTORATIVE AND PROSTHETIC DENTISTRYAnnual Review of Materials Science, 1997