Fabrication of Bi-2223 High Temperature Superconducting Tapes With Groove Rolling Process
- 5 March 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 30 (4) , 1-4
Abstract
${\text{Bi}_{1.76}\text{Pb}_{0.34}\text{Sr}_{1.93}\text{Ca}_{2.02}\text{Cu}_{3.06}O_{10+\delta}}$ (Bi-2223) high temperature superconducting tapes were fabricated with Powder in tube (PIT) process. The traditional drawing process was partially replaced by groove rolling. The influences of cold working method on the filament density, the phase evolution mechanism as well as superconducting properties has been systematically studied. The groove rolling process could obviously enhance the filament density of Bi-2223 green wires, which thus led to the change of Bi-2223 formation rate. Meanwhile, although the heat treatment process has not been thoroughly optimized and the residual secondary phase content was still high, the critical current has been improved for more than 20% with groove rolling process, which should be attributed to the improved intergrain connections. On the other hand, the groove rolling process was also effective on the fabrication with Bi-2223 tapes with larger filament number, such as 85 or 121 to maintain the uniformity of filament deformation.Keywords
Funding Information
- National ITER program of China (2015GB115001)
- Light of West China (XAB2018AW15)
- International Cooperative Project in Shaanxi Province (2018kw-055)
This publication has 24 references indexed in Scilit:
- Growth kinetics study of the (Bi,Pb)2Sr2Ca2Cu3O10 grains in Ag/Ni composite-sheathed tapesSolid State Sciences, 2011
- The influence of post-annealing on the Pb3(Bi0.5Sr2.5)Ca2CuOy phase evolution and superconducting properties of (Bi,Pb)-2223/Ag tapesPhysica C: Superconductivity and its Applications, 2007
- Study on the Precursory Powder for Bi-2223 TapeMaterials Science Forum, 2007
- Recent development of drastically innovative BSCCO wire (DI-BISCCO)Physica C: Superconductivity and its Applications, 2006
- Characterization and phase transitions of (Bi,Pb)2Sr2Ca2Cu3Ox–Ag composite powder obtained by spray pyrolysisMaterials Chemistry and Physics, 2005
- Development of Ag-sheathed Bi-2223 superconducting wires and their applicationsIEEE Transactions on Applied Superconductivity, 2001
- Long length manufacturing of high performance BSCCO-2223 tape for the Detroit Edison Power Cable ProjectIEEE Transactions on Applied Superconductivity, 2001
- Current transport and microstructural development in BSCCO tapes and joints fabricated by groove rollingSuperconductor Science and Technology, 2000
- Phase development and critical current density of Bi-2223 tapes fabricated by groove rollingSuperconductor Science and Technology, 1999
- 2223 Phase Formation in Bi(Pb)─Sr─C─a─Cu─O: II, The Role of Temperature—Reaction MechanismJournal of the American Ceramic Society, 1992