Study on low-silica pellet with added MgO and TiO2
Authors:
- 21 February 2018
- journal article
- research article
- Published by SAGE Publications in Mineral Processing and Extractive Metallurgy: Transactions of the Institutions of Mining and Metallurgy
- Vol. 128 (4) , 213-220
Abstract
Low-silica pellet is beneficial for blast furnace to reduce the amount of slag and fuel rate. However, the reduction swelling of low-silica pellet is serious. The effects of TiO2 and MgO on such metallurgical properties as reduction swelling, reducibility and smelting performance of pellets have been studied and production of magnesium–titanium-bearing pellet with low silica is proposed in this paper. The MgO in sinter can be transferred to pellet and TiO2 is provided by the pellet for blast furnace to protect hearth erosion. The magnesium–titanium-bearing pellet with low silica, in which the content of MgO is 1.7%, SiO2 is 2.8% and TiO2 is 1.2%, has been produced by the raw materials from Shougang Jingtang United Iron & Steel Co., Ltd. The pellets were used on 5500 m3 blast furnace with a ratio of more than 28% stably and good technical and economical indexes were obtained. The average particle size of sinter was improved when the MgO content of pellet is increased without adding magnesium additives to sinter.Keywords
Funding Information
- National Natural Science Foundation of Chinag (51474022)
This publication has 12 references indexed in Scilit:
- Formation mechanism of the protective layer in a blast furnace hearthInternational Journal of Minerals, Metallurgy and Materials, 2015
- Numerical Analysis of Titanium Compounds in Blast Furnace Hearth During Titania AdditionSteel Research International, 2015
- Influence of temperature and strain rate on flow stress behavior of twin-roll cast, rolled and heat-treated AZ31 magnesium alloysTransactions of Nonferrous Metals Society of China, 2015
- Effect of pellet basicity and MgO content on the quality and microstructure of hematite pelletsInternational Journal of Mineral Processing, 2011
- Phase Equilibria and Slag Formation in the Magnetite Core of Fluxed Iron Ore PelletsISIJ International, 2008
- Investigation of Blast-furnace Hearth Sidewall Erosion by Core Sample Analysis and Consideration of Campaign Operation.ISIJ International, 2003
- Formation of Titanium Carbonitride from Hot Metal.ISIJ International, 2001
- Reassessment of the Solubility of TiC and TiN in Fe.ISIJ International, 1999
- Effect of titania on the characteristics of blast furnace slagsSteel Research, 1993
- Formation of Titanium Compounds, So-called Titanium-Bear, in the Blast Furnace HearthTetsu-to-Hagane, 1976