KWKeng Wu

Keng Wu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Keng Wu has a total of 23 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Investigation of the Reaction Kinetics of a Sinter-Reduction Process in the Thermal Reserve Zone of a Blast Furnace Using a Modified Sectioning Method

    by Li Zhu, Wenlong Zhan, Yubo Su, Yi Liu, Keng Wu

    With the development of large-scale and high-performing blast furnaces, it is necessary to extensively study the reaction characteristics and related kinetic parameters of sinters in their heat reserve area. Under reducing atmosphere conditions, the reduction of iron oxide in sinter is closely related to the gasification reaction of coke. Based on a simulation experiment, the transition point from chemical reactions to diffusion and the related kinetic parameters were determined through a sectioning method. The results showed that increasing the proportion of low-grade coke increased the chemical-reaction rate, but it slightly decreased the mass-transfer and diffusion rates. An increase in the coke particle size increased the chemical-reaction, mass-transfer, and diffusion rates. However, an increase in the CO2 volume fraction in gas reduced the chemical-reaction, diffusion, and mass-transfer rates. The mixing ratio of coke and sinters increased the chemical-reaction rate, but it decreased the mass-transfer and diffusion rates. The rate constant of the chemical reactions in the early stage was three orders of magnitude higher than that of the diffusion and mass-transfer coefficients, and the fitting degree was obviously better than that of the molecular diffusion in the later stage. Based on the thermodynamics of irreversible processes, the interference of the chemical reactions with the diffusion and mass transfer in the near-equilibrium region was tentatively established, the method of controlling coke diffusion and mass transfer in the later reaction stage was given and related kinetic parameters were corrected, and further improvement of the modified sectioning method was completed.

  • Study on low-silica pellet with added MgO and TiO2

    by Gele Qing, Keng Wu, Xiaodong Du, Yunqing Tian, Wenbin Huang, Yuandong Pei, Yan Zhang

    Low-silica pellet is beneficial for blast furnace to reduce the amount of slag and fuel rate. However, the reduction swelling of low-silica pellet is serious. The effects of TiO2 and MgO on such metallurgical properties as reduction swelling, reducibility and smelting performance of pellets have been studied and production of magnesium–titanium-bearing pellet with low silica is proposed in this paper. The MgO in sinter can be transferred to pellet and TiO2 is provided by the pellet for blast furnace to protect hearth erosion. The magnesium–titanium-bearing pellet with low silica, in which the content of MgO is 1.7%, SiO2 is 2.8% and TiO2 is 1.2%, has been produced by the raw materials from Shougang Jingtang United Iron & Steel Co., Ltd. The pellets were used on 5500 m3 blast furnace with a ratio of more than 28% stably and good technical and economical indexes were obtained. The average particle size of sinter was improved when the MgO content of pellet is increased without adding magnesium additives to sinter.


  • Effect of the firing temperature and the added MgO on the reduction swelling index of the pellet with low SiO2 content

    by G. Qing, K. Wu, Y. Tian, G. An, X. Yuan, D. Xu, W. Huang

    The use of pellet with low SiO2 content in blast furnace (BF) will reduce the slag amount as well as fuel rate and increase the productivity. In this paper, the effect of the firing temperature and the added MgO on the reduction swelling index (RSI) and the compressive strength of the reduced pellet with low SiO2 content was investigated, and the microstructure of the fired and reduced pellets was analysed by means of the electron microscopy. It was found that the decrease of SiO2 content will raise the RSI and reduce the compressive strength of reduced pellet. When the SiO2 content of pellet is 4.8%, the RSI is 16.5% and compressive strength of reduced pellet is 423 N/P. When the SiO2 content is 2.8 and 1.8% fired at 1280°C, the RSI of the reduced pellet will increase to 34.5 and 55.8% and the compressive strength is reduced to less than 200 and 80 N/P. However, if some MgO was added, the RSI and the compressive strength of the reduced pellet could be improved significantly. When pellet’s MgO content was over 1.7% and SiO2 content was 2.8% or MgO content was 2.5% and SiO2 content was 1.8% fired at 1280°C, the RSI of the two pellets could drop to less than 20% and the compressive strength could increase to more than 300 N/P. Then, the technical index of pellet will meet the requirement of the charging in large BF. The added MgO pellet with low SiO2 content have been used in 5500 m3 BF in Shougang Jingtang Corporation and delivered sustainable improvement of cost reduction.