Artificial Thermal Ageing of Polyester Reinforced and Polyvinyl Chloride Coated Technical Fabric
- 29 January 2020
- journal article
- research article
- Published by MyJove Corporation in Journal of Visualized Experiments
- No. 155,p. e60737
Abstract
Architectural fabric AF9032 has been subjected to artificial thermal ageing to determine changes of the material parameters of the fabric. The proposed method is based on the accelerated ageing approach proposed by Arrhenius. 300 mm x 50 mm samples were cut in the warp and fill directions and placed in a thermal chamber at 80 °C for up to 12 weeks or at 90 °C for up to 6 weeks. Then after one week of conditioning at ambient temperature, the samples were uniaxially tensioned at a constant strain rate. Experimentally, the parameters were determined for the non-linear elastic (linear piecewise) and viscoplastic (Bodner–Partom) models. Changes in these parameters were studied with respect to the ageing temperature and ageing period. In both cases, the linear approximation function was successfully applied using the simplified methodology of Arrhenius. A correlation was obtained for the fill direction between experimental results and the results from the Arrhenius approach. For the warp direction, the extrapolation results exhibited some differences. Increasing and decreasing tendencies have been observed at both temperatures. The Arrhenius law was confirmed by the experimental results only for the fill direction. The proposed method makes it possible to predict real fabric behavior during long term exploitation, which is a critical issue in the design process.Keywords
This publication has 22 references indexed in Scilit:
- Aging behavior and lifetime prediction of PMMA under tensile stress and liquid scintillator conditionsAdvanced Industrial and Engineering Polymer Research, 2019
- Optimal conditions for accelerated thermal ageing of district heating pipesEnergy Procedia, 2018
- Eyring acceleration model for predicting calendar ageing of lithium-ion batteriesJournal of Energy Storage, 2017
- Identification of Bodner-Partom model parameters for technical fabricsComputers & Structures, 2017
- Mechanical properties of Precontraint 1202S coated fabric under biaxial tensile test with different load ratiosConstruction and Building Materials, 2015
- Durability of GFRP nanocomposites subjected to hygrothermal ageingComposites Part B: Engineering, 2015
- Accelerated aging for testing polymeric biomaterials and medical devicesMedical Engineering & Physics, 2008
- Accelerated environmental ageing study of polyester/glass fiber reinforced composites (GFRPCs)Composites Part B: Engineering, 2008
- Constitutive equations for the viscoplastic-damage behaviour of a rubber-modified polymerEuropean Journal of Mechanics - A/Solids, 2005
- Investigation on rheological properties of technical fabric ?Panama?Archive of Applied Mechanics, 2004