Mechanical stability analysis of 3D nanosheet-stacked structure
- 7 November 2025
- journal article
- Published by IOP Publishing in Engineering Research Express
- Vol. 7 (4) , 045353
Abstract
The three-dimensionally (3D) stacked gate-all-around (GAA) nanosheet (NS) channel structures have been adopted into the state-of-the-art integrated circuit technologies to overcome the scaling limit of conventional device structure. However, a mechanical stress during the channel release process, which results in the channel deformation, is a severe concern for the high yield. In this study, the origins of the stress are examined by using a technology computer-aided design (TCAD) simulation and the design guidelines are proposed for the NS fabrication without the deformation. The results show that the stress is mainly determined by the active pads and NS length ratio ( L pad / L NS ). Finally, it is demonstrated by fabricating the NS with L pad / L NS = 1 that the mechanical stress is efficiently suppressed, thereby preventing the deformation.Keywords
Funding Information
- Samsung (IO220808-01765-01)
- Korea Semiconductor Research Consortium (20020830)
- Ministry of Science and ICT, South Korea (IITP-2025-RS-2023-00260091)
- IC Design Education Center
- Ministry of Trade, Industry and Energy (1415181069)
This publication has 18 references indexed in Scilit:
- FinFET to GAA MBCFET: A Review and InsightsIEEE Access, 2024
- Hybrid integrated Si nanosheet GAA-FET and stacked SiGe/Si FinFET using selective channel release strategyMicroelectronic Engineering, 2023
- Comparing bulk-Si FinFET and gate-all-around FETs for the 5 nm technology nodeMicroelectronics Journal, 2021
- Study of selective isotropic etching Si1−xGex in process of nanowire transistorsJournal of Materials Science: Materials in Electronics, 2019
- FinFET Versus Gate-All-Around Nanowire FET: Performance, Scaling, and VariabilityIEEE Journal of the Electron Devices Society, 2018
- Mechanical properties and microstructure of spark plasma sintered nanostructured p-type SiGe thermoelectric alloysMaterials & Design, 2015
- Strain mapping at the nanoscale using precession electron diffraction in transmission electron microscope with off axis cameraApplied Physics Letters, 2014
- 3D TCAD simulations of strained Si CMOS devices with silicon-based alloy stressors and stressed CESLSolid-State Electronics, 2009
- Low‐Temperature In Situ Large‐Strain Plasticity of Silicon NanowiresAdvanced Materials, 2007
- Moore's law: past, present and futureIEEE Spectrum, 1997