Analytical determination of the end-winding portion of the winding-to-rotor capacitance for the prediction of bearing voltage in electrical machines
Open Access
- 29 June 2020
- journal article
- research article
- Published by Springer Nature in Electrical Engineering
- Vol. 102 (4) , 2481-2491
Abstract
The number of inverter-fed motors is increasing due to the good controllability of the motor and the meanwhile low acquisition costs. As a result of the discrete switching states of the power transistors, the average of the three output voltages of a two-level inverter is a common mode voltage, which differs from zero. The common mode voltage is impressed into the motor winding by the inverter, and an image of the common mode voltage is produced across the bearings via the winding-to-rotor capacitance. The voltage applied to the motor bearings can exceed the dielectric strength of the lubricating film of the bearings and lead to discharge currents resulting in damage to the motor bearings. The winding-to-rotor capacitance is composed of a slot and an end-winding portion. In this article, an analytical determination of the end-winding portion of the winding-to-rotor capacitance is presented, which, in addition to the rotor geometry, considers the influence of materials with different permittivities. The method is validated by means of FEM simulations for different geometries and materials.Keywords
Funding Information
- German BMWi/AiF (FVA PA Wälzlager 863 I)
This publication has 7 references indexed in Scilit:
- The Role of End-Winding in Building Up Parasitic Capacitances in Induction Motors2019
- Normalization-Based Approach to Electric Motor BVR Related Capacitances ComputationIEEE Transactions on Industry Applications, 2019
- Shaft-to-Frame Voltage Mitigation Method by Changing Winding-to-Rotor Parasitic Capacitance of IPMSMIEEE Transactions on Industry Applications, 2018
- Mitigation Method of the Shaft Voltage According to Parasitic Capacitance of the PMSMIEEE Transactions on Industry Applications, 2017
- Shaft-to-frame voltage suppressing approach by applying eletromagnetic shield in IPMSM2017
- Theoretische Elektrotechnik2013
- Prevention of harmful EDM currents in inverter-fed AC machines by use of electrostatic shields in the stator winding overhang2010